combustion analyser News

  • Stricter monitoring requirements for combustion emissions

    The new monitoring requirements being imposed on Medium Combustion Plants (MCPs) and Large Combustion Plants (LCPs) in Europe is symptomatic of environmental initiatives affecting a wide variety of industries. In the following article, Dr Andrew Dixon from Gasmet Technologies UK (formerly Quantitech) explains how instrumentation manufacturers are responding to these new challenges. The ...


    By Gasmet Technologies Oy

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • TOC Analysers for IECEx and ATEX zones

    Total Organic Carbon analysers are commonly used to measure the level of organic contamination in water. Online TOC analysers installed in refineries and petrochemical plants are located right in the middle of the process facilities. Here explosive gasses, vapours or mist can be present. It is a high risk situation, as any spark or any heat source may cause an explosion. Hence, explosive ...


    By LAR Process Analysers AG

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • New gas analysers have remote connectivity

    Signal Group (UK) manufactures instruments for monitoring a large number of gases, but their stand (#60) at AQE 2018 will focus on the latest technologies for the measurement of VOCs. The new Series IV gas analysers have 3G, 4G, GPRS, Bluetooth and satellite compatibility, and each instrument is built with its own IP address. As a result, users will be provided ...


    By Signal Group Ltd

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • UK gas analyser manufacturer seeks US partner

    For over 40 years, Signal Group has been a leading manufacturer of reference gas analysers employing flame ionisation detectors (FID), chemiluminescence detectors (CLD), and a variety of non-dispersive infra-red (NDIR) technologies. Following the launch of the company’s Series IV analysers, Signal is looking to expand its presence overseas and welcomes expressions of interest from ...


    By Signal Group Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • AMETEK Land Reintroduces Continuous Emissions Monitoring System for Smaller Combustion Processes

    AMETEK Land announces the reintroduction of the FGA 900 Series, its compact and fully integrated continuous emissions monitoring system (CEMS) for flue gas measurements on processes burning natural gas and biomass. The FGA 900 Series is an extractive sampling multi-gas analyser, which provides accurate ...


    By AMETEK Land

  • AMETEK Land Presents on `Early Detection of Spontaneous Combustion` at European Biomass To Power

    AMETEK Land will present and exhibit at ACI’s 7th Annual European Biomass to Power conference, November 8-9, 2017 in Aarhus, Denmark. Manfred Hayk, Business Development Manager at AMETEK Land, will present “Early Detection of Spontaneous Combustion”. The presentation looks at the characteristics of biomass ...


    By AMETEK Land

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • EPA analysis finds combustion chemical, coal tar constituent carcinogenic to humans

    The Environmental Protection Agency on Aug. 21 released a draft toxicological review of benzo[a]pyrene that found the combustion byproduct and coal tar constituent is carcinogenic to humans and harmful to developing organs and systems. “There is no known commercial use for benzo[a]pyrene,” which is part of a family of air ...


    By Bloomberg BNA

  • QuickTOC®purity: Precise continuous TOC analyses in low ppb ranges for pharmaceutical water

    QuickTOC®purity of LAR Process Analysers AG is an on-line measuring system for the detection of total organic carbon (TOC) in pharmaceutical water particularly for 'Highly Purified Water' (HPW) and 'Water for Injection' (WFI), according to USP Chapter 643 and EP 2.2.44. The TOC measuring system QuickTOC®purity was designed in cooperation with customers from the pharmaceutical industry in ...


    By LAR Process Analysers AG

  • ASTM D4239 - 12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

    Sulfur is part of the ultimate analysis of coal and coke. Results of the sulfur analysis are used for evaluation of coal preparation and cleaning, evaluation of potential sulfur emissions from coal and coke combustion or conversion processes, and evaluation of coal and coke quality in relation to contract specifications, as well as for scientific purposes. The competency of ...


    By ASTM International

  • CODEL International releases new EnergyTech range

    EnergyTech is a new range of gas and particulate analysers focused on power generation process, safety and efficiency. The EnergyTech 101 is a low cost optical dust/smoke monitor, the 301 is a new tribo-electric dust monitor that can be used in indicative and calibrated modes. The EnergyTech 200 series is a new range of mill, silo and other combustion process monitors configurable from 1 to 4 ...


    By Codel International Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you