combustion gas analyser News

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • The Blue Line - A Range Of Flue Gas Analysers Available At Shawcity Limited

    The new Blue Line range of Flue Gas Analysers from Systroniks are available to hire or buy from Shawcity. You can now buy from as little as £469! Flue Gas analysis is necessary to ensure a safe working environment as well as the efficient operation of your Boiler! The Blue Line range of flue gas analysers are simple hand-held flue gas instruments which allow you to ...


    By Shawcity Limited

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Landfill and Biogas gas monitoring

    Landfill and biogas provide a source of readily available and renewable energy. However, as a source of energy care has to be taken to understand and quantify impurities in the raw gas that can have an effect on either the amount of energy products, or contaminants that can foul the energy generators (siloxanes). ETG can provide analysis solutions to qualify and quantify these impurities. Gas ...


    By ETG Risorse e Tecnologia

  • QuickTOC®purity: Precise continuous TOC analyses in low ppb ranges for pharmaceutical water

    QuickTOC®purity of LAR Process Analysers AG is an on-line measuring system for the detection of total organic carbon (TOC) in pharmaceutical water particularly for 'Highly Purified Water' (HPW) and 'Water for Injection' (WFI), according to USP Chapter 643 and EP 2.2.44. The TOC measuring system QuickTOC®purity was designed in cooperation with customers from the pharmaceutical industry in ...


    By LAR Process Analysers AG

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Gas analyzers accelerate business growth

    Transportable multi-parameter analytical instruments have been key to the growth of an analytical services company based in Elk City, Oklahoma. Great Plains Analytical Services (GAS) operates a fleet of mobile monitoring systems, providing onsite gas analysis for customers across the USA, and Gasmet FTIR analyzers have enabled the company to offer a comprehensive onsite monitoring service. ...


    By Gasmet Technologies Oy

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • Shale gas extraction linked to water contamination

    A new study suggests shale gas extraction leads to methane contamination of underground water sources and calls for thorough surveys of methane levels at extraction sites. The study presents a timely insight into a relatively under-researched area of science that will help support decisions on the future of shale gas exploration. Shale gas, or natural gas extracted from sedimentary rocks ...


    By GLOBE Foundation

  • Record High for Global Greenhouse Gas Emissions

    The disappointing climate conference in Warsaw, Poland—which was intended to lay the groundwork for a global climate agreement in 2015—stands in sharp contrast to the continued growth in emissions of greenhouse gases. Negotiators and activists alike confront not only the fact that carbon dioxide (CO2) emissions reached the highest annual total to date, but also a shifting geographic ...


    By Worldwatch Institute

  • FTIR for CEM’s and VOC’s monitoring

    As major contributors to environmental emissions, the waste incineration and power generation industries require both continuous and periodic emissions monitoring to ensure each plant is within Emission Limit Values (ELVs). FTIR provide to perform emissions monitoring solutions for the range of standard incineration or “combustion” gases, both inorganic species such as CO, NOx, SO2, ...


    By ETG Risorse e Tecnologia

  • CODEL International releases new EnergyTech range

    EnergyTech is a new range of gas and particulate analysers focused on power generation process, safety and efficiency. The EnergyTech 101 is a low cost optical dust/smoke monitor, the 301 is a new tribo-electric dust monitor that can be used in indicative and calibrated modes. The EnergyTech 200 series is a new range of mill, silo and other combustion process monitors configurable from 1 to 4 ...


    By Codel International Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you