compressed air filter News

  • ANDRITZ SEPARATION presents new product series of filter presses driven by compressed air

    ANDRITZ SEPARATION, part of international technology group ANDRITZ, has developed a new, innovative product series of filter presses. The SP series is a so-called “air-over-oil” filter press driven exclusively by compressed air – a power connection is, therefore, not required. With the new SP series, ANDRITZ is primarily targeting the process and wastewater industries. ...

  • Cable drying without use of compressed air

    Of all applications with compressed air, drying is the least efficient. Apart from the energy consumption and the cost of filtering oil and condensate the maintenance costs for a continuous operating compressor can increase considerably. Almeco accepts any challenge to replace compressed air in a production process with drying application by an energy efficient alternative. Almeco recently ...


    By Almeco SA

  • Tama S.p.A: Pulco Air filter HTB

    The product The Pulco Air HTB baghouse dust collector is a dry filtration system used to purify the air of suspended solid particles. Its installation allows treatment of a vast range of pollutants and guarantees the quality of the air in the production environment and protection for workers. Filter inlet is composed of a pre-chamber, which recovers the ...


    By Tama Aernova Srl

  • United Air Specialists, Inc. Offers Protura® Advanced Nanofiber Oval Replacement Cartridge Filters

    United Air Specialists, Inc. (UAS) now offers oval replacement cartridge filters with Advance Nanofiber Filtration Technology for highest performance and value. This is no ordinary nanofiber though. UAS’ proprietary Protura® Nanofiber Filter Technology is scientifically proven to achieve higher efficiency, cleaner air, lower pressure drop, longer filter life and greater energy savings ...


    By CLARCOR Industrial Air

  • New possibilities in the generation of process air

    The compression of air and neutral gases is very energy-intensive. Today, the generation of process air covers a major part of the energy costs for pneumatic applications or for the municipal and industrial waste water treatment. It is more important than ever for the plant operators to select the right compressor or blower for their process. The comprehensive product range of the rotary lobe ...

  • New BIBUS-SECOH Air Pumps

    Our diaphragm blowers are ideally suited for applications, where minimum energy consumption, delivery of absolutely oil-free air, near silent operation and a minimum of simple maintenance are requested. The operating principle is very simple and efficient: Activated electromagnets put the magnet holder at the same frequency as that of the power supply (50Hz or 60Hz) into oscillation movements. ...


    By Bibus AG

  • Control system CPFE filter manager launched

    Control system CPFE Filter Manager After three year of intensive development work our new control and measurement system for filtration plants is ready for the market. The system comes with a lot of advanced accessories that will help the user to learn more about their filtration plant. Easiness of tracing faults on valves, bag failure, excessive compressed air consumption are only a few of the ...


    By ITK Envifront AB

  • $280 billion air and water treatment markets

    The performance of filters and other air and water treatment equipment can now not only be monitored remotely but optimized by sophisticated software programs. Increasingly plants see advantages in outsourcing maintenance. Materials developed for compressed air filtration may find use in dust collection and liquid purification. As a result, many companies are now interested in the broader ...


    By The McIlvaine Company

  • The Palas system MMTC for testing cleanable filter media

    The operational conditions in the system such as the particle size distribution, the profile and material of the dust feed, the inflow speed of the medium, the composition and temperature of the carrier gas and the manner of compressed air cleaning have a considerable effect on the service life and the separation characteristics of a filter element. So, the manufacturer specially selects the ...


    By Palas GmbH

  • Industrial Maid LLC`s Side Draft Filter Wall

    “Side Draft” – Filter Wall - Smoke, Fume and Dust Collection Unit Industrial Maid LLC has designed a unique “side draft” filter wall to be used on robotic and automated welding cells. The system is mounted on a forklift slip with access from front, back & both sides. The units have a three stage filter configuration – 2” spark baffles, 4” pleated pre-filters and 10 pocket 95% 120 sq ft media ...


    By Industrial Maid LLC

  • Oil-free compressors clear the air for rapid product proliferation, finds Frost & Sullivan

    The rising environmental consciousness of governments have set off a spate of regulations for ensuring improved air quality, which has given a shot in the arm for the oil-free compressors market. End-user industries are scurrying to equip their machines with oil-free compressors to ensure compliance with industry standards, chief among which are the International Organization for Standardization ...


    By Frost & Sullivan

  • DCL’s Non-Blocking Diesel Particulate Filter Achieves Excellent Particulate Matter (PM) Reduction

    July 7, 2006, Concord, Ontario - DCL International Inc., a global leader in emission control solutions has manufactured a newly patent-pending, non-blocking diesel particulate filter called MINE-X® Ultra. The exciting new technology achieves greater reductions of diesel particulate matter (DPM) than a standard retrofit Diesel Oxidation Catalyst (DOC), without the risk of clogging found with ...


    By DCL International Inc.

  • Institute of Energy and Environmental Technology e. V. (IUTA) tests filter for contec Oil Mist Separator

    The contec GmbH Industrieausrüstungen GmbH from Bad Honnef is a leading supplier and manufacturer of air and gas filtration, liquid filtration, oil mist filtration and filling level measurement equipment. For the application in oil mist filtration, contec had a filter element tested by the Institute of Energy and Environmental Technology e. V. (IUTA) in Duisburg in accordance with ISO ...

  • Industrial Maid LLC releases Robotic Welding Hood Series

    Industrial Maid LLC has designed a unique robotic welding smoke and fume collection hood system. The system uses a three stage filter package including a spark arrestance filter, a 4” pleated pre-filter and a 95% multi-pocket main bag filter. The system does not require storage of dust in trays or barrels and does not require compressed air for operation. The low air to cloth ratio and use of ...


    By Industrial Maid LLC

  • Do you know ... DFP system?

    Test rig for testing filters and filter media under overpressure up to 7 bar With the DFP series, Palas® offers high-precision testing systems for the development and quality control of compressed air filters and filter media. From HEPA qualities with high separating efficiency to pre-filtering qualities, the test rigs in the DFP series deliver clear, fast and therefore cost-effective ...


    By Palas GmbH

  • Low maintenance industrial hose pump transfers yeast slurry

    The benefits of using a British manufactured Verderflex peristaltic pump to remove yeast from fermented wine are manifold. It is self priming, dry running, provides constant flow to the filter press at increasing pressure and requires little maintenance. These qualities have met the exact needs of a major German chamber filter press manufacturer resulting in the Verderflex VF25 industrial hose ...

  • Plymovent sponsors MX3D to print a 3D steel bridge

    Plymovent contributes its clean air and filtration expertise to the first bridge project of its kind in the world! Designed by Dutch designer and artist Joris Laarman, MX3D will 3D print the construction of a metal bridge to be placed in the center of Amsterdam. MX3D, a highly innovative Dutch start-up company, invented an ...


    By Plymovent Group BV

  • EnergyTech 201 Coalmill CO Analyser Installed at Eggborough Power Station

    CODEL have successfully completed extensive field trails of the new EnergyTech 201 at Eggborough Power Station which has highlighted extreme performance, reliability and repeatability with low maintenance operation. The early detection of coal fires in coal handling systems on coal fired power stations is essential to prevent catastrophic damage to expensive plant and serious injury to personnel. ...


    By Codel International Ltd

  • Pumping yeast in wineries with a peristaltic pump

    The process of fermentation Winemaking or vinification starts with the selection of grapes. After harvesting the grapes, they are taken to a winery for fermentation. Red grapes are made from the pulp fermented along with the skin, which gives it the real colour. Whereas white wine is made by fermenting the juice extracted from the grapes. Traditionally the grapes were collected in ...

  • Easy to service and easy to use

    “We focused on serviceability using 3D images before the first prototype was even manufactured. Serviceability was a design priority from the start,” says Field Service Manager Jyrki Lampinen. Special attention has been paid to easy everyday use and maintenance. For example, the fuel and AdBlue tanks can be filled up easily at chest level when standing beside the tractor. The radiator ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you