continuous emissions monitoring calibration system News

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • NEW - Opsis Continuous Emissions Monitoring system for power plant operators

    Untitled Document Enviro Technology Services is pleased to announce the launch of the new Opsis CEM system. Designated Powerman 400, this automatic dilution extractive system is designed for continuous ...

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • Gasmet launches new Mercury emissions monitor

    Gasmet, the Finland based manufacturer of advanced gas analysis systems, will launch a new continuous mercury monitoring system (CMM) at Mercury 2013 in Edinburgh, Scotland (28th July – 2nd August). Gasmet Europe’s Antti Heikkilä says “The CMM employs cold vapour atomic fluorescence (CVAF) to deliver very low detection limits at a significantly lower cost than other ...


    By Gasmet Technologies Oy

  • New emissions monitoring system could change face of pollution at sea

    A new emissions monitoring system being developed by a Norfolk, VA, systems engineering firm will allow vessels worldwide to continuously monitor pollutants and readily report findings to regulatory agencies and inspectors. The patent-pending Continuous Emissions Monitoring System (CEMS), developed by W R Systems, Ltd. (WRSystems), is the first technology integration of its kind. A successful ...


    By WR Systems, Ltd.

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Mercury emissions monitor draws crowds in Edinburgh

    Gasmet unveiled a new continuous mercury monitoring system (CMM) at Mercury 2013 in Edinburgh, Scotland, during the ‘International Conference on Mercury as a Global Pollutant’. Expressing his delight with the number of enquiries received, Gasmet Europe’s Antti Heikkilä said: “With delegates from over 50 countries, the conference was extremely well attended and our ...


    By Gasmet Technologies Oy

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • Gasmet raises the bar for emissions analysers

    Gasmet Technologies, the Finland based instrumentation manufacturer, has announced that its FTIR-based Continuous Emissions Monitoring System (CEMS) has received approval from TÜV, the international certification body, for the EN 15267-3 standard, which is more recent and more stringent than the existing German Type Approval and QAL1 certificate, EN14181. This means that the Gasmet CEMS is ...


    By Gasmet Technologies Oy

  • Frost & Sullivan recognizes Pavilion Technologies for innovation in the air emission control and monitoring market

    Based on its recent analysis of the air emission control market, Frost & Sullivan recognizes Pavilion Technologies, a Rockwell Automation company, with the 2009 North American Frost & Sullivan Industry Innovation & Advancement of the Year Award. Pavilion Technologies leverages the skills of its development team, expert process designs, and cutting-edge patented technology to offer ...


    By Frost & Sullivan

  • Apex launches new XC-6000EPC MercSampler for Sorbent Trap Monitoring Systems

    Apex Instruments proudly introduces our newly developed XC-6000EPC MercSampler for Sorbent Trap Monitoring Systems, designed for continuous sampling of vapor-phase mercury emissions from stationary combustion sources in accordance with 40 CFR Part 75, Appendix K.  Paired samples are extracted from the flue gas for the desired time period, from several minutes to several days. Samples are ...


    By Apex Instruments, Inc.

  • WEX – Emissions and Process DAHS – Awarded MCERTS Certification

    Environnement S.A and iseo are pleased to announce new MCERTS Product Conformity Certification for its WEX DAHS (CEMS and Process Supervisory Control And Data Acquisition software). We are proud to announce that the MCERTS certification for our WEXTM Data Acquisition and Handling System has been achieved. WEX system is a DAHS dedicated for Industrial Emission Monitoring System (CEMS) ...


    By Environnement S.A

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Monitoring at biomass plants should be `future proof`

    The recent rise in approvals for the construction of renewable energy plants burning biomass has highlighted the need for specified monitoring equipment to be both cost-effective and flexible. Quantitech Director Dominic Duggan explains: “Whilst biomass power represents an important part of the Government’s strategy to produce energy from renewable sources and to reduce waste to landfill, a ...


    By Quantitech Ltd

  • Mobile Environment Monitor Gets an Airing at MCERTS

    It’s not just environmental monitoring equipment that will come under scrutiny at this year’s MCERTS Conference – delegates will be able to get an up-to-the-minute read-out on local air pollution levels. Enviro Technology Services plc – a world leader in the supply of advanced environmental air quality monitoring systems – will have an Opsis open-path DOAS system set up outside the main door ...

  • FTIR provides monitoring flexibility for Catalyst Environmental

    ENVIRONMENTAL instrumentation specialists Quantitech, recently supplied emissions monitoring company Catalyst Environmental, with a range of instruments that has enabled the company to provide a market-leading range of services across a particularly broad spectrum of applications. In the case study described below, the advantages of multiparameter gas analysers from Quantitech are exemplified as ...


    By Quantitech Ltd

  • MCERTS delivers confidence in multi-parameter monitors

    Simon Wills, Managing Director of OTT Hydrometry, the hydrometeorological and water quality instrumentation company, was presented with an MCERTS certificate for Hydrolab water quality monitors at WWEM 2010. Simon was accompanied by Lea Ann Zullig the Global Director of Sales and Marketing for Hydrolab products. In this article, Simon explains the reasoning behind this initiative and outlines the ...

  • Pennsylvania DEP Fines Northampton Cement Company More than $31,000 for Emissions Violations

    Hercules Cement Co. will pay a $31,394 fine for sulfur dioxide emissions violations and data availability problems at its facility in Stockertown, Northampton County, according to a consent order and agreement announced today by the Department of Environmental Protection. "Facilities that emit air pollutants, ...

  • ComRent Extends the Power of Load Bank Monitoring

    Helping companies extend the power of load bank monitoring, ComRent today announced a new solution that helps companies reinforce their ...


    By Marketwire

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you