continuous flue gas monitoring News

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • PCME launches new Flue Gas Measurement System

    PCME Ltd, leading specialist in the development, manufacture and supply of continuous particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor the flow rate of emissions from industrial sources complying with the European Monitoring Standard EN-16911-2.  Suitable for measuring flue gas flow rates after both bag filter and electrostatic ...


    By PCME Ltd

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • Continuous Mercury Monitoring with State-of-the-Art Technology = Gasmet CMM

    With the introduction of ever tightening legislation for emissions, new challenges are also facing the equipment that is used for continuous monitoring of trace pollutants. In the United States, the Clean Air Mercury Rule will establish strict limits for Mercury emissions from coal-fired power plants. Gasmet Technologies decided to meet this challenge with a novel approach together with the ...


    By Gasmet Technologies Oy

  • Industry first for Enviro Technology’s continuous Emissions Monitoring Systems

    Air quality monitoring specialists, Enviro Technology, have achieved an industry first becoming the only UK supplier of Continuous Emissions Monitoring Systems (CEMS) to meet the new, revised MCERTS certification version 3.3 for performance standards and test procedures. As part of stringent UK and European regulations, industrial companies regulated by the Environment Agency are required to ...

  • Continuous moisture measurement of biomass for better energy content data

    Moisture content is one of the fundamental parameters when deciding on biomass fuel quality as this in turn dictates energy content and price. In short, water is expensive to transport and to remove. The traditional methods of determining moisture content and bulk density almost all involve random sampling from a consignment which is not without drawbacks. The Dutch company INADCO, exhibiting for ...


    By Elmia AB

  • New gas flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with ...


    By Environnement S.A

  • Premier Dust Monitor gains new MCerts Approval

    Untitled Document The LAND Model 4500 Premier dust emissions monitor has been granted MCerts approval for Continuous Emissions Monitoring Systems (CEMs) by the UK Environment Agency. The 4500 Premier now ...


    By AMETEK Land

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • Why It Is Important To Monitor Ammonia Slip In A Coal Fired Power Power Plant

    Monitoring flue gas ammonia slip in a coal fired power plant is performed immediately after the SNCR/SCR and is a very challenging task, but extremely important for process efficiency of the pollution control equipment.  The flue gas is filled with high levels of sulfur dioxide, particulate, hydrochloric acid and many other corrosive and noxious gases making the ammonia measurement a very ...


    By Cemtek Environmental, Inc.

  • Apex launches new XC-6000EPC MercSampler for Sorbent Trap Monitoring Systems

    Apex Instruments proudly introduces our newly developed XC-6000EPC MercSampler for Sorbent Trap Monitoring Systems, designed for continuous sampling of vapor-phase mercury emissions from stationary combustion sources in accordance with 40 CFR Part 75, Appendix K.  Paired samples are extracted from the flue gas for the desired time period, from several minutes to several days. Samples are ...


    By Apex Instruments, Inc.

  • 4500 Premier Dust Monitor lives up to it’s name

    The Model 4500 Premier dust monitor surpassed the competition as the choice for a leading cement manufacturer in Northern Ireland. The application involved monitoring dust levels from a rotary kiln, which were typically between 20 and 60 mg/m3. These low levels are ideally suited to the 4500 Premier, with outstanding performance at levels as low as ...


    By AMETEK Land

  • Pulp and Paper industry designs QAL 181 WS dust monitor as the must to have

    Besides being the only system totally certified on the market, the QAL 181 WS dust monitor is suitable for measuring particulate emissions from wet scrubbers (alkaline scrubbers) and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. In 2015, one of the biggest European Pulp and Paper Company with facilities in France, launched a ...


    By Environnement S.A

  • AMETEK Land Makes Lancom 4 Portable Gas Analyser More Affordable

    AMETEK Land has made its Lancom 4 Portable Gas Analyser even more affordable with a Euro price reduction following Britain’s vote to exit the European Union. Lancom 4 is renowned as the world’s most versatile and accurate portable flue gas analyser whether for testing a boiler system or checking a process for a pollutant. The analyser is able to monitor up to nine different gases and ...


    By AMETEK Land

  • AMETEK Land enhances Lancom 4 Portable Gas Analyser

    Now available as a free download, Lancom 4’s innovative data acquisition software, Insight, is a powerful tool that allows users to interface their analyser with a PC for remote control and data logging. Insight ...


    By AMETEK Land

  • Auburn Systems Introduces the Newest TRIBO.dsp U3000 Series of Bag Leak Detectors and Solids Flow Monitors

    Auburn’s TRIBO.dsp U3000 series of electrostatic/triboelectric (TRIBO) bag leak detectors, ...


    By Auburn Systems, LLC

  • ADI 2045TI Online Analyzer Improves Scrubbing Process in Carbon Capture Plants

    The most commonly used process for post-combustion CO2 capture is amine-based scrubbing. Metrohm Applikon offers a fully automated solution for the online monitoring of this process in order to optimize the amine activity, measure the efficiency of the CO2 capture, and thus help reducing overall costs. More information is available from ...


    By Metrohm AG

  • Modern water secures first sales of trace metal analysers in Scandinavia

    Modern Water plc (AIM:MWG), the owner of leading water technologies for the production of fresh water and monitoring of water quality, has continued to grow its global presence with first sales of its trace metal analysers in Scandinavia. The order for Modern Water’s OVA on-line monitoring product has been received from Tekniska Verken Power Plant in Linkoping in Sweden, a company that will ...

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • Pollutec 2014: new ultrasonic stack Flowmeter launched

    Environnement S.A, leading specialist in the development, manufacture and supply of continuous gas and particulate emission monitors, introduce the STACKFLØW 400 designed specifically to monitor releases from industrial sources complying with the European Monitoring Standard EN-16911-2. STACKFLØW 400 uses PCME*’s unique FlueSonic™ technology and mathematical measurement ...


    By Environnement S.A

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you