continuous gas analyser News

  • New partnership for TOC gas analysers

    Quantitech, the Milton Keynes based instrumentation specialist, has been appointed exclusive distributor in the UK and Ireland for ErsaTec GmbH, a leading German manufacturer of gas analysers for the measurement of organic gases such as solvents and fuels. Designed and developed by former employees of Bernath Atomic (manufacturer of the well-known Bernath 3006 FID), the ErsaTec analysers employ ...


    By Quantitech Ltd

  • Oxford Instruments continues to develop industry leading NMR core analysers

    Oxford Instruments and Green Imaging Technologies are pleased to announce the introduction of GeoSpec2+, the latest evolution of the renowned GeoSpec range of NMR core analysers. The two companies have combined their world leading NMR knowledge and experience to once again advance NMR measurement capabilities in the oil and gas sector. More ...


    By Oxford Instruments plc

  • FTIR Gas Analyser Supports Carbon Capture Research

    Quantitech has commissioned an advanced Gasmet FTIR multiparameter gas analyser at the UK Carbon Capture & Storage Research Centre (UKCCSRC) facility near Sheffield. This Pilot-scale Advanced Capture Technology (PACT) facility was created to catalyse and support both industrial and academic research. PACT Business Development Manager Dr Kris Milkowski, from the University of Leeds, says: ...


    By Quantitech Ltd

  • The importance of maintaining your fixed gas analyser

    Plant technicians rigorously check for contaminants within the digester and ensure that the performance is optimised but maintaining the gas analyser monitoring the whole process is often overlooked.  Many analysers are used in harsh and potentially explosive environments and so it is of paramount importance that the operation runs smoothly and safely. With simple ...


    By Geotech

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • QuickTOC®purity: Precise continuous TOC analyses in low ppb ranges for pharmaceutical water

    QuickTOC®purity of LAR Process Analysers AG is an on-line measuring system for the detection of total organic carbon (TOC) in pharmaceutical water particularly for 'Highly Purified Water' (HPW) and 'Water for Injection' (WFI), according to USP Chapter 643 and EP 2.2.44. The TOC measuring system QuickTOC®purity was designed in cooperation with customers from the pharmaceutical industry in ...


    By LAR Process Analysers AG

  • Micro gas turbine protected by continuous biogas analysis in South Korea

    A biogas micro gas turbine electrical power generation plant at Gong Ju, Korea now generates 60kW from waste water. Biogas rich in methane (CH4) comes from anaerobic digestion of 100 tons of waste water produced every day from raising livestock. The biogas fuels the micro turbine which drives the generator. While the plant was being fine-tuned, before starting full-scale operation, a ...


    By Geotech

  • UKAS Quality Award, a UK first - for Geotech in Gas Analyser Calibration

    Geotech has achieved UKAS accreditation for its calibration lab for its full range of landfill, biogas and waste to energy gas analysers. According to its UKAS assessor, “Geotech is the first manufacturer of portable gas analysers to obtain UKAS accreditation.” For Geotech gas analysers, already with MCERTS certification for the instrument, this important UKAS accreditation gives Geotech analyser ...


    By Geotech

  • Opex not capex for portable gas analysers on contaminated land and brownfield sites

    The CIRIA compliant GA5000 portable landfill and contaminated land gas analyser can now be leased from Geotech, providing an ideal solution for consultants carrying out ground gas investigations on contaminated land and brownfield sites. Ground gas investigations are typically undertaken as ...


    By Geotech

  • a1-cbiss to Exhibit New Multi-Gas Analyser at RWM

    a1-cbiss will be promoting an MCERTS certified CEM system at RWM plus the latest Ankersmid Gas Conditioning Components RWM in partnership with CIWM is Europe’s premier event dedicated to resource efficiency and waste management solutions. The event is shaped around the demands of this rapidly growing sector and spans each element of the waste hierarchy. a1-cbiss will be present once again ...


    By a1-cbiss

  • Tohoku tsunami clean-up uses Geotech gas analyser

    It may now be two years since the devastating tsunami which hit the Pacific coast of Japan in 2011, but the clean-up continues. 20 million tons of waste from the tsunami has been collected into about 200 mounds, similar to landfill sites. Each site is monitored by inserting a 2cm diameter pipe for measuring temperature. The team, led by Dr. Kazuto Endo of the National Institute for Environmental ...


    By Geotech

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • Systech Illinois display gas analyser range at Achema 2015

    Systech Illinois are looking forward to presenting their gas analyser range at this year’s Achema exhibition. From Monday 15th to Friday 19th of June they will be displaying: the nitrogen purge control system 9500 which monitors and adjusts atmospheres in soldering machines and heat treatment furnaces, saving nitrogen, cutting costs and improving process control; the ATEX approved, ...


    By Systech Instruments Ltd

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical products. ...


    By Quantitech Ltd

  • Landfill gas H2S increase measured with high-range analysers

    Hydrogen sulphide levels (H2S) in landfill gas have increased and Geotech has responded to changes reported by landfill site operators by now offering analysers measuring H2S up to 10,000 ppm. Rapidly rising H2S levels are thought to be caused by waste-to-landfill content changing largely as a result of success in recycling and other initiatives to avoid sending waste to landfill. Previously, H2S ...


    By Geotech

  • AMETEK Land Makes Lancom 4 Portable Gas Analyser More Affordable

    AMETEK Land has made its Lancom 4 Portable Gas Analyser even more affordable with a Euro price reduction following Britain’s vote to exit the European Union. Lancom 4 is renowned as the world’s most versatile and accurate portable flue gas analyser whether for testing a boiler system or checking a process for a pollutant. The analyser is able to monitor up to nine different gases and ...


    By AMETEK Land

  • AMETEK Land enhances Lancom 4 Portable Gas Analyser

    Now available as a free download, Lancom 4’s innovative data acquisition software, Insight, is a powerful tool that allows users to interface their analyser with a PC for remote control and data logging. Insight ...


    By AMETEK Land

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • FTIR analyser reveals surprising solution

    Emissions analysers have to be checked annually by certified testers and during recent functionality tests for a Gasmet FTIR continuous emissions monitor (CEM) at a UK Energy from Waste plant, the Nitrogen Dioxide span check results were found to be incorrect. A subsequent investigation revealed surprising results that would not have been apparent had the plant been using traditional CEMs. NO2 ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you