continuous monitoring instrument News

  • 20 year old FTIR gas analyzer finally retires

    After almost 20 years of reliable service a Gasmet FTIR multigas analyzer has finally been retired. The instrument, which is a Gasmet 9540 was purchased at the end of the last century by VTT, the Technical Research Centre of Finland. “We have utilised this analyzer in a variety of research projects over the years and it has performed extremely well. However, some of the spare parts are no ...


    By Gasmet Technologies Oy

  • Improvement made to IAQ Monitoring Instruments

    Improvement work carried out by our development team has resulted in improvements made to our IAQ Instruments; the 2nd prototype model for the Touch Screen IAQ Profile Monitor instrument comes with larger screen ratio; resulting in a better quality display meaning easier navigation and control of the touch screen software. We have also developed new ...


    By PPM Technology

  • Continuous hydrogen monitor improves refinery isomerisation efficiency

    Instrumentation specialist Quantitech launched a range of hydrogen –specific gas analysers in the UK and Ireland in 2007. Since that time Managing Director Keith Golding says “The solid-state sensor technology from H2scan has proved highly popular in a wide variety of applications, but online process monitoring is becoming the most popular because of the rapid return on investment ...


    By Quantitech Ltd

  • New integrated continuous emissions monitoring capability

    Quantitech has a long-standing reputation for the supply and service of high quality environmental monitoring instruments in the UK. However, following acquisition by Gasmet Technologies, the company has invested in the resources necessary to design, deliver, install and commission complete integrated emissions monitoring systems, and a video has been published on the Quantitech website ...


    By Quantitech Ltd

  • Estuary research project highlights advantages of continuous monitoring

    Researchers from the south coast of England have established a small network of monitoring instruments in Christchurch Harbour and associated rivers to study the effects of weather events on water quality, and to better understand the magnitude and spatial/temporal variation of macronutrient fluxes - nitrogen (N), carbon (C) and phosphorus (P). The project, which is financed by a Natural ...


    By Xylem Analytics

  • Oxford Instruments continues to develop industry leading NMR core analysers

    Oxford Instruments and Green Imaging Technologies are pleased to announce the introduction of GeoSpec2+, the latest evolution of the renowned GeoSpec range of NMR core analysers. The two companies have combined their world leading NMR knowledge and experience to once again advance NMR measurement capabilities in the oil and gas sector. More ...


    By Oxford Instruments plc

  • IAQ monitoring instruments showcased at MIECF 2011

      Our partners Hinds International have recently returned from showcasing our IAQ Monitoring instruments at the MIECF exhibition in Macao. Our instruments were showcased to "green" industry professionals and decision makers across the region. Our newest instrument the T ...


    By PPM Technology

  • New Family of IAQ Monitors from E Instruments

    E Instruments Proudly Presents our BRAND NEW Family of Indoor Air Quality Monitors. Our IAQ Monitors offer the ability to measure various parameters including: Ambient Temperature, %RH, Wet Bulb, Dew Point, Differential Pressure, Barometric Pressure,  CO2, CO, O2, Ozone, Formaldehyde, VOCs, NO, NO2, SO2, H2S. Real-Time Data logging with Wireless Bluetooth ...

  • Introducing multi-modal sampling GC/MS with continuous air monitoring

    The new Griffin™ 460 provides detection, confirmation and continuous monitoring in a single instrument. The Griffin™ 460 mobile GC/MS enables innovative multi-modal sample introduction for liquid, solid, and vapor samples while also providing continuous, direct air monitoring and MS/MS. The Griffin 460 is ideal for field-based forensics and other mobile laboratory ...

  • Introducing multi-modal sampling GC/MS with continuous air monitoring

    The new Griffin 460 provides detection, confirmation and continuous monitoring in a single instrument. The Griffin 460 mobile GC/MS enables innovative multi-modal sample introduction for liquid, solid, and vapor samples while also providing continuous, direct air monitoring and MS/MS. The Griffin 460 is ideal for field-based forensics and other mobile laboratory applications, as well as for ...

  • Ion Science launches world’s first continuous benzene specific monitor

    Further underlining its position as a global leader in the design and manufacture of high performance gas detection instrumentation, Ion Science (www.ionscience.com) has unveiled the world’s first continuous benzene specific monitor. The revolutionary ‘Titan’ has been specially designed for the accurate and reliable detection of ambient benzene in ...


  • Continuous oxygen deficiency monitor features long life, economical operation

    An extremely economical, low-maintenance oxygen deficiency (O2) monitor is now available from PureAire Monitoring Systems. Ideal for the continuous monitoring of cryogenic gas storage areas, confined spaces, and other locations where low oxygen levels may pose a hazard to personnel, the PureAire Air Check O2 Deficiency Monitor is suitable for monitoring laboratories, clean rooms or outdoor gas ...

  • Industry first for Enviro Technology’s continuous Emissions Monitoring Systems

    Air quality monitoring specialists, Enviro Technology, have achieved an industry first becoming the only UK supplier of Continuous Emissions Monitoring Systems (CEMS) to meet the new, revised MCERTS certification version 3.3 for performance standards and test procedures. As part of stringent UK and European regulations, industrial companies regulated by the Environment Agency are required to ...

  • Continuous Mercury Monitoring with State-of-the-Art Technology = Gasmet CMM

    With the introduction of ever tightening legislation for emissions, new challenges are also facing the equipment that is used for continuous monitoring of trace pollutants. In the United States, the Clean Air Mercury Rule will establish strict limits for Mercury emissions from coal-fired power plants. Gasmet Technologies decided to meet this challenge with a novel approach together with the ...


    By Gasmet Technologies Oy

  • PCME launch a new range of QAL1 certified continuous particulate emission monitors

    PCME Ltd (part of Environnement S.A Group), a global leading specialist in the development, manufacture and supply of continuous particulate emission and flow monitors, introduce a new range of Backscatter Particulate Emission Monitors designed to meet global demands for quality […] ...


    By Environnement S.A

  • BAM-1020 continuous particulate monitor awarded USEPA class III designation.

    Met One Instruments has become the first instrument manufacturer ever to successfully be awarded USEPA Class III equivalency designation for a continuous PM-2.5 particulate monitor. The BAM-1020 beta attenuation mass monitor has been assigned USEPA designation EQPM-0308-170, notice of which was published in the US Federal Register on March 12, 2008. The implication of this achievement is very ...


  • PPM Technology to showcase gas detection and IAQ monitoring instruments at MCERTS 2011

    PPM Technology will be happy to discuss and demonstrate our latest monitoring instruments at MCERTS Stand-17. The Wireless IAQ Profile Monitor is able to continuously monitor a number of Indoor Air Quality (IAQ) parameters. Wireless technology enables the data to be presented on the manger PC in real-time. Up to 8 customer-specified parameters can be monitored and analysed, a large number of ...


    By PPM Technology

  • Training Courses Are a ‘Must’ for Those Involved with Continuous Emissions Monitoring

    Untitled Document Following positive feedback from its students Enviro Technology, the UK’s leading exporter of environmental ...

  • Make Noise at Work Monitoring Your Priority With Pulsar Instruments

    Excessive noise is a real risk to workers’ hearing and is one of the most common occupational health issue. Depending on the work and the industry they work in, workers can be exposed to loud short-term or steady long-term noise. Trust Pulsar’s 45 years of experience of designing and manufacturing noise measurement products when buying a new sound level meter With over four ...


    By Pulsar Instruments plc

  • IAQ Monitoring instruments showcased at Green Middle East Exhibtion 2011

    Our distributors in the UAE and the Arabian Peninsula - Green Eco Global Trading recently participated in Green Middle East Exhibition held at Expo Centre, Sharjah, UAE. Green Eco displayed, promoted and demonstrated PPM’s indoor air monitoring instruments to delegates at the event.  The exhibition promotes the environment industry in the Middle East region, ...


    By PPM Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you