dewatering filter press News

  • Filter Press Draco, excellence in dewatering

    Maximum dewatering and dry solids production, large filtration area in a short space, automatic control system, low chemical consumption, after-sales technical assistance. Process flexibility-easily accommodates fluctuating inlet consistency. User friendly-simple, safe & reliable operation. Capable of operating in fully automatic, FPA, semi-automatic, FPSA, completely in manual mode, FPM and ...


    By Toro Equipment S.L.

  • Bolivian mine acquires filter presses

    Coeur Manquiri, a wholly-owned subsidiary of the US-based Coeur d’Alene Mines Corporation, recently purchased three MC Press filter presses from Siemens Water Technologies for its San Bartolome mine in Potosi, Bolivia. The dewatering filter presses will allow improved dry-stacked tailings management on site. The MC Press filter presses are expected to become operational later this year. ...

  • WesTech Introduces Tower Press Filter

    WesTech Engineering, Inc. is introducing its Tower Press Filter to the industrial and minerals markets. The WesTech Tower Press Filter delivers optimum production performance and availability for maximum dewatering in a wide range of industrial and minerals applications, including fine iron ore concentrates, leach residues, metallurgical precipitates, ...


    By WesTech Engineering, Inc.

  • Plate Filter Press Model. FD-M

    Plate Filter Press Model FD-M is especially designed for dewatering the slurry with grease by our R&D. It has been proven to have the capability of solving the difficulty in effectively minimizing the moisture of the grease sludge in dewatering, confronted by most oil refinery plants and power plants. The type mainly adopts membrane chamber system, combined with dedicated filter cloth, which ...

  • PHOENIX Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The new PHOENIX Model WX-D features dual gravity zones for maximum hydraulic flow rates per meter of belt width on very difficult, low feed solids biological sludge applications. The integral third belt pre-thickener accelerates gravity drainage, while the extended gravity ...

  • PHOENIX Announces Expanded Belt Filter Press Line

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The new PHOENIX Model WX-D features dual gravity zones for maximum hydraulic flow rates per meter of belt width on very difficult, low feed solids biological sludge applications.  The integral third belt pre-thickener accelerates gravity drainage, while the extended ...

  • PHOENIX Process Compact Dewatering Systems

    PHOENIX Process Equipment Co. offers a series of affordable compact belt filter presses and gravity belt thickeners specifically designed for smaller industrial and municipal wastewater plants. When supplied as skid mounted systems, they include all necessary pumps, controls, polymer dosing systems, and require only four external connections, greatly simplifying installation The compact ...

  • The new ANDRITZ C-Press: efficient sludge dewatering with high performance and low operating costs

    International technology Group ANDRITZ has launched new sludge dewatering equipment for waste water treatment plants, industrial treatment plants, and food applications. The ANDRITZ C-Press, a screw press providing high performance combined with compact design, features low operating costs. With its direct drive system and conical shaft with constant screw pitch, the new press can handle inlets ...

  • AMCON announces order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd.

    AMCON INC. (Headquarters: Yokohama, Kanagawa, CEO: Shoichi Sasaki), manufacturing and selling of sludge treatment equipments, today announced that we received an order of New Sludge Dewatering Press “Volute VDC-121 Model” for Ueno Industry Co., Ltd. (Headquarters: Nakano-ku, Tokyo). The equipment is being delivered in August 2012. ...


    By AMCON Inc.

  • $1 Billion/yr Market for Belt Filter Presses and Replacement Belts

    Belt filter presses were developed in the 1970s and became popular just as the McIlvaine Company published the first issue of the Liquid Filtration Newsletter in 1980. This design rapidly replaced drum filters for many dewatering applications from sewage sludge dewatering to sludges in food, mining and other industries. Over the years the number of operating units has increased to more than ...


    By The McIlvaine Company

  • Siemens expands dewatering solutions into mining market

    By acquiring the American company Industrial Process Machinery (IPM), Manchester, New Hampshire, USA, Siemens expands its dewatering solutions offering for industrial applications. As of 31st December 2009, IPM is part of Siemens Water Technologies, a business unit of the Siemens Industry Solutions Division. In the future, Siemens will offer IPM filter presses worldwide, mainly within the scope ...

  • Belt press used in Textile industry

    We have been awarded a project of dewatering sludge coming from sedimentation tank of textile wastewater treatment plant. This plant has once used 4 units chamber filter press(1000x1000, 80 m2) , to process the waste sludge three years ago, but they are not satisifed for the performace. After further checking and discussion with us, they award us for using our Environmental type belt press to ...

  • Compactor dumps, perforates, dewaters, crushes, and bales.

    February 27, 2013 - Used for processing full plastic or aluminum liquid containers, X3Cycler features stainless steel construction and can process up to 30 yd³ or 1,200 lb/hr of plastic or aluminum containers with volume reductions of up to 95%. Dual 8 in. bore hydraulic cylinders develop up to 250,000 lb of force. Designed to accept Gaylords or plastic totes of ...


    By Sebright Products, Inc.

  • PHOENIX Process Equipment Co Announces Expanded Belt Filter Press Line WX-D

    PHOENIX Process Equipment Co., of Louisville, Kentucky, has announced an expanded line of Model WX Belt Filter Presses. The new PHOENIX Model WX-D features dual gravity zones for maximum hydraulic flow rates per meter of belt width on very difficult, low feed solids biological sludge applications. The integral third belt pre-thickener accelerates gravity drainage, while the extended gravity ...

  • Compact dewatering systems from PHOENIX Process Equipment Co.

    PHOENIX Process Equipment Co. offers a series of affordable compact belt filter presses and gravity belt thickeners specifically designed for smaller municipal wastewater plants. When supplied as skid mounted systems, they include all necessary pumps, controls, polymer dosing systems, and require only four external connections, thus greatly simplifying installation.The compact gravity belt ...

  • Moyno 2000 HS System Technology Targets Dewatered Sludge Cake

    The Moyno 2000 HS system is a significant technology advancement for the wastewater treatment industry. It can pump filter cake further distances with higher volumetric efficiencies than any other progressing cavity pump. Its twin-screw feeder supplies a constant, pressurized feed rate to the pump resulting in a 100 percent pump cavity fill rate. The Moyno 2000 HS System features an integral ...


    By Moyno, Inc.

  • Sales Of Liquid Macrofiltration Filters And Media To Reach $5.5 Billion By 2011

    Sales of the large dewatering and process filter equipment and media will continue to prosper and grow by $2 billion to more than $5.5 billion in 2011.  This is the latest prediction by the McIlvaine Company in its online continually updated, Liquid Filtration and Media World Markets. McIlvaine divides the solid/liquid separation ...


    By The McIlvaine Company

  • ANDRITZ SEPARATION launches new low-profile belt press: significant reduction in investment costs combined with further decrease in operating costs

    International technology Group ANDRITZ is offering its customers worldwide a new, innovative belt press for dewatering in municipal and industrial applications, based on a new low-profile design and flexible modular construction. The main benefit of the new belt press is that size and weight were reduced by around 50% each compared to the previous machine generation. This means lower investment ...

  • Liquid macrofiltration market to exceed $6 billion annual revenues next year

    The market for filtration and equipment classified as “macrofiltration” will exceed $6 billion next year up from $5.6 billion this year.  Of this total, $4.6 billion will be equipment and $1.4 billion of the revenues will be generated from media and cloth sales. Macrofiltration is distinct from cartridges in that macrofiltration devices such as filter presses, gravity filters and ...


    By The McIlvaine Company

  • DIEMME filtration won AMORAS: “State of the Art” project for the maintenance of the antwerp port

    Diemme has been awarded by SeReAnt (a joint venture with Dredging International-Deme Environmental Contractor-Jan De Nul-ENVISAN) with a very important supplying of Membrane Chamber Filter Presses for the project AMORAS (Antwerp Mechanical Dewatering, Recycling and Application of Silt).The project will be a permanent and ecological solution for storage and recycling of dredged material in the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you