disc screen News

  • AZUD, a leading manufacturer of disc filters and screen filters is looking to expand distributor network

    We are amongst the world leading companies manufacturing DISC & SCREEN FILTERS, specially designed to remove suspended solids from water in industrial processes. Learn more about AZUD and its products on the website: www.azudwaterfiltration.com. Present in over 70 countries worldwide through a large network of subsidiaries, dealers, agents and ...


    By Sistema Azud, S.A.

  • ECOSTAR new screening technology

    The Ecostar screen belongs to the innovative category of screening machines with discs.It is built in various versions, with different length starting from 3 m. and with differ-ent sizes of screening (from 50 to 150 mm.).It offers its best performance in the separation of urban and industrial waste (with a production up to 70/80 ton/h), but it can be used with important results in other vari-ous ...


  • Fine screens to replace sand filters

    The Huber RoDisc® Micro Screen has been designed for fine screening and polishing of many effluents, and can be used for ensuring compliance with meeting discharge consent standards or allowing water to be reused within the plant. The screen comprises a series of discs fitted with woven mesh down to 10 micron apertures which are slowly rotated on a central shaft all supported from bearings ...


    By Huber SE

  • MAS “CDF” Continuous Disc Filtration System

    The MAS Continuous Disc Filtration, also known as the ¡§CDF¡¨, is a revolutionary adaptive melt filtration system which can be easily integrated into any current extrusion line that is in need of superior contaminant removal. The innovative CDF boasts many advantages over other continuous filters available today: Common Impurities- The CDF removes up to 5% of ...


    By eFACTOR3 LLC

  • EPA Proposes EDSP Policies and Procedures for SDWA Chemicals and Issues Second List of Chemicals for EDSP Tier 1 Screening

    On November 17, 2010, the U.S. Environmental Protection Agency (EPA) published draft policies and procedures for screening Safe Drinking Water Act (SDWA) chemicals under the Endocrine Disruptor Screening Program (EDSP). 75 Fed. Reg. 70558. "SDWA chemicals" are substances which "may be found in sources of drinking water if the Administrator determines that a substantial population may be exposed" ...


    By Bergeson & Campbell, P.C.

  • EPA Proposes EDSP Policies and Procedures for SDWA Chemicals and Issues Second List of Chemicals for EDSP Tier 1 Screening

    The U.S. Environmental Protection Agency (EPA) published draft policies and procedures for screening Safe Drinking Water Act (SDWA) chemicals under the Endocrine Disruptor Screening Program (EDSP). 75 Fed. Reg. 70558. "SDWA chemicals" are substances which "may be found in sources of drinking water if the Administrator determines that a substantial population may be exposed" (SDWA Section 1457). ...


    By Acta Group

  • Minimal Polymer Loss, Maximum Contaminant Removal!

    The MAS Continuous Disc Filtration, also known as the “CDF”, is a revolutionary adaptive melt filtration system which can be easily integrated into any current extrusion line that is in need of superior contaminant removal. The innovative CDF boasts many advantages over other continuous filters available today: The CDF removes up to 5% of soft contaminants such as Wood, Paper, ...


    By eFACTOR3 LLC

  • Pin Mill Controls Particle Sizes, Cleans Rapidly

    A new 24-inch (610 mm) diameter Pin Mill model CIM-24-MS from Munson Machinery grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh). Also known as a Centrifugal Impact Mill, it is equipped with a stationary outer disc and a rotating inner disc, both ...

  • Hammer Mill Reduces Friable, Fibrous Materials

    A new Hammer Mill Model 141 from Munson Machinery reduces friable and fibrous materials into uniform particle sizes ranging from 20 to 300 mesh. Centrifugal force causes pivoting hammers to stand at 90° to the rotating shaft, throwing material against breaker plate ridges in the feed section, and then against perforated ...

  • New routes in pellet production

    While the wood materials industry, wood-burning power stations and the pellet industry argue over the increasingly valuable raw material, wood, the pellet producers have decided to pursue a different route. Roundwood which cannot be directly recycled is barked and cut into short lengths. This roundwood frequently contains metal chips and is therefore unsuitable for use with chipping knives. ...


    By Vecoplan AG

  • ANDRITZ receives order for extensive rebuild of Stora Ensoʼs Varkaus mill, Finland

    International technology Group ANDRITZ has received an order from Stora Enso to rebuild the fiberline, evaporation plant, recausticizing plant, recovery boiler, and recycled fiber plant at the Varkaus pulp mill, Finland. Start-up is scheduled for the fourth quarter of 2015. The order is part of Stora Ensoʼs project to convert an existing fine paper machine to a containerboard machine as ...

  • FX 3300 Air Permeability Tester LABAIR IV

    TEXTEST AG of Switzerland is proud to introduce the brandnew FX 3300 Air Permeability Tester LABAIR IV. This latest addition to the complete family of Air Permeability Testers supersedes the very successful FX 3300-III, which has been in production since 1999. The FX 3300 LABAIR IV offers the accuracy and ease of operation of its predecessor, as well as some exciting new features: The internal ...


    By Textest AG

  • Meet the New Generation of Extrusion and Melt Filtration Technology from MAS at K 2016

    Austrian extrusion machinery manufacturer MAS Maschinen- und Anlagenbau Schulz GmbH MAS has established itself as a supplier of unconventional but proven technologies that save space and energy, and allow its customers to now do things that were previously not possible. To mark its 10th anniversary, MAS will introduce an entirely new corporate identity in combination with a new machine design for ...


    By eFACTOR3 LLC

  • SCA Recycling to open state-of-the-art multi-material recycling facility

    Paper reprocessor SCA Recycling UK is opening a new state-of-the-art £15 million materials recycling facility soon, expanding its operations into the multi-material market. According to SCA Recycling the MRF will be capable of processing paper, plastics, glass, ferrous and non-ferrous metals to produce high quality materials. Cutting edge disc screen technology ...

  • WesTech Announces Strategic Partnership with Nordic Water

    May 20th, 2009. WesTech Engineering, Inc. is pleased to announce a new partnership with Nordic Water Products. WesTech, will now have sole North American distribution rights for the following Nordic Water product groups: MEVA fine screens, featuring the Rotoscreen™ Step and patented Monoscreen™ suitable for pre-membrane treatment. New from Meva is the patented Screw Wash Press with CPS. The ...


    By WesTech Engineering, Inc.

  • WEIMA develops F-Rotor for shredding of filaments and films

    WEIMA Maschinenbau GmbH, Ilsfeld, has further developed the rotor of the single shaft WLK type shredder especially for difficult shredding of textile filaments, tapes, but also for films etc. The co-called F-Rotor (F=filaments) is characterised by novel blade separation and cutting geometry designed for the purpose of use. This guarantees an optimal shredding process with high energy efficiency. ...


    By WEIMA

  • AVIS Industrial Corporation Acquires IPS Balers from CP Manufacturing

    Avis Industrial Corporation, a privately-held company with ten subsidiaries throughout the United States, Canada and Mexico, announces the acquisition of IPS Balers, Inc. in Baxley, Georgia. IPS Balers, Inc. is a manufacturer of ferrous, non-ferrous, plastics, and mixed fiber balers. IPS has been providing balers and conveyors to the recycling industry for ...


    By IPS Balers, Inc.

  • ANDRITZ SEPARATION enhances service offerings with new competence center in Krefeld

    ANDRITZ SEPARATION, part of international technology Group ANDRITZ, opened up a modern service center in Krefeld, Germany, today in order to enhance its customer service in Germany and neighboring countries. In the new competence center, decanter and filter centrifuges, filter presses, separators, belt, disc and drum filters, as well as screens of almost any brand are modernized and repaired for ...

  • World’s Largest Melt Filter Celebrates its Premier MAS at FAKUMA 2015

    The Upper Austrian plastics machine manufacturers MAS Maschinen- und Anlagenbau Schulz GmbH pride themselves in their innovative contributions to improve efficiency within the extrusion and recycling technology markets. These innovative contributions include the extremely gentle plasticizing co-rotating conical twin screw extruder that offers high throughput rates, the DRD waterless cleaning and ...


    By eFACTOR3 LLC

  • CP Group installs 25TPH MRF for ReCommunity

    The CP Group, headquartered in San Diego, CA, has designed, manufactured and installed a new single stream recycling facility in Beacon, NY. The facility, built for ReCommunity, began running April 23rd, and is processing 25TPH. The material ...


    By CP Manufacturing, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you