dust emissions monitoring News

  • Gas Sampling Probes for Every Application

    Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...


    By JCT Analysentechnik GmbH

  • Premier Dust Monitor gains new MCerts Approval

    Untitled Document The LAND Model 4500 Premier dust emissions monitor has been granted MCerts approval for Continuous Emissions Monitoring Systems (CEMs) by the UK Environment Agency. The 4500 Premier now ...


    By AMETEK Land

  • Site Remediation - Emissions Boundary Monitoring

    The remediation of contaminated land sites can prove to be a challenging undertaking.  There is considerable risk of chemical exposure to both the onsite workforce and to surrounding communities. To offsite receptors, the remediation process itself can become a significant route of exposure, with the excavation and uncovering of otherwise trapped contaminants resulting in potential ...


    By Shawcity Limited

  • Learn More About the Art of Emissions Monitoring

    E Instruments is proud to present our newest report on the complex art of emissions monitoring and gas sampling. Every application encompasses different system considerations and there really is no “one-size-fits-all” approach to proper emissions monitoring. The purpose of this technical note is to provide an understanding of what types of equipment are needed for a wide range of ...

  • Measure to Manage: ET launches new monitor for construction’s “dastardly dust”

    Leading air quality monitoring equipment specialist Enviro Technology Services Plc has launched a new monitor specifically developed with construction dust applications in mind. With both the Institute of Air Quality Management and the Mayor of London recently publishing guidance on assessing dust emissions from demolition and construction sites, the launch of the new, web-enabled monitor ...

  • 4500 Premier Dust Monitor lives up to it’s name

    The Model 4500 Premier dust monitor surpassed the competition as the choice for a leading cement manufacturer in Northern Ireland. The application involved monitoring dust levels from a rotary kiln, which were typically between 20 and 60 mg/m3. These low levels are ideally suited to the 4500 Premier, with outstanding performance at levels as low as ...


    By AMETEK Land

  • Shawcity Seminar 1: Occupational Dust Monitoring, RCS and Diesel Fume.

    Wednesday 22nd June saw the first of the 2016 seminars hosted by Shawcity, which offer an independent focus on key issues facing those who work in occupational hygiene, environmental monitoring and health and safety. The event, held at Wrag Barn Golf and Country Club, Highworth, focused on occupational dust monitoring, RCS and diesel fume. Shawcity welcomed over 40 delegates on the day ...


    By Shawcity Limited

  • AQE 2015 to focus on ways to improve air quality and emissions monitoring

    AQE 2015 to focus on ways to improve air quality and emissions monitoring The organisers of AQE 2015, the international Air Quality and Emissions show, have announced a comprehensive programme of events that will take place in Telford, UK, on 22nd and 23rd April. Created to provide an update on the latest regulations, technologies, methods and research in air quality and emissions monitoring, AQE ...


    By Quantitech Ltd

  • PCME Technical Workshops: Best Practice for Industrial Emission Monitoring

    Seminars 17-19 May 2016 Spring Workshops take place: Tuesday 17 May at Alexandra House, Swindon  UK Thursday 19 May at Weetwood Hall, Leeds  UK Providing practical guidance for best practice particulate emission monitoring, these Technical Workshops have been designed to focus on the most common issues faced during dust and flow monitor selection, ...


    By PCME Ltd

  • ABB emissions monitoring system helps clear the air in Chile

    The solution is a vital component in Polpaico’s efforts to reduce greenhouse gas emissions at its Cerro Blanco cement plant near Santiago and help Chile’s leading cement manufacturer improve air quality in the country’s most populous region. According to the World Health Organization, air quality in Santiago rates among the world's worst. That is largely because greater Santiago is built in a ...


    By ABB

  • Reducing emissions in construction

    Here at Casella, we’ve long been on our soapbox promoting better understanding of construction site emissions. So we were delighted to recently hear news of the London Low Emission Construction Partnership, which sees a variety of London stakeholders joining forces to encourage and convince the construction industry to reduce its emissions.  The London Low Emission Construction ...


    By Casella

  • Pulp and Paper industry designs QAL 181 WS dust monitor as the must to have

    Besides being the only system totally certified on the market, the QAL 181 WS dust monitor is suitable for measuring particulate emissions from wet scrubbers (alkaline scrubbers) and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. In 2015, one of the biggest European Pulp and Paper Company with facilities in France, launched a ...


    By Environnement S.A

  • Next Generation of Dust Collector Controllers Provides Remote Monitoring and Greater Economy for Worksites with Multiple Baghouses

    MikroPul's new PulsePro EC™ dust collector controller provides expanded capability: remote monitoring - the ability to remotely check status and change the setpoints of baghouses from any computer on the internet (using the control's built-in IP address) - as well as the ability to monitor multiple baghouses from one controller, which will provide economies for large plants. PulsePro EC can also ...

  • Diesel Emissions, Health and the Law

    When diesel is used as an engine fuel, it is inevitable that you will produce Products of Incomplete Combustion (PICs). Hence, we never just produce carbon dioxide (CO2) and water (H2O) alone, but rather a myriad of hydrocarbons including aromatics (e.g. benzene, toluene) aldehydes and poly-aromatic hydrocarbons (PAHs) in a semi-volatile phase or bound with carbonaceous particulate, and ...


    By Shawcity Limited

  • Johnson Matthey helps TfL with London`s dust suppressant trial

    Johnson Matthey, world leader in the production of catalytic systems for emission control in light and heavy duty vehicles, is supplying its CRT® filter technology and PIO-CAN filter monitor to the tractor currently being used in a dust suppressant trial.  Trials are occurring in specific areas of London that have been identified as at risk of exceeding the limit, set by the EU, for fine ...

  • Camfil Farr APC Updates Gold Series® Dust And Fume Collectors

    Camfil Farr APC has announced major updates to its popular line of Gold Series® cartridge dust and fume collectors. The revamped line features a number of design changes and cosmetic enhancements plus an expanded menu of options to ensure a clean workplace in all types of industrial environments. "We've made these changes to uphold our mission statement – to supply the best dust ...

  • Animal feed producer exposes workers to potential dust explosion and other hazards

    Combustible dust left uncontrolled or suspended in the air can explode, which was one of many safety hazards discovered after an inspection at the Thomas Moore Feed facility in Navasota, Texas, by the U.S. Department of Labor's Occupational Safety and Health ...

  • Air Monitors launches latest industrial particulate monitors

    A new report published in September 2012 by the European Environment Agency shows that almost a third of Europe's city dwellers are exposed to excessive concentrations of airborne particulate matter (PM); one of the most important pollutants in terms of harm to human health because it penetrates sensitive parts of the respiratory system. Colin Craggs from instrumentation specialist Air Monitors ...


    By Air Monitors Ltd.

  • Air quality/emissions event approved for CPD

    The Conference and Workshops at AQE 2015, the international Air Quality and Emissions event (Telford, UK, on 22-23rd April) have been approved for Continuing Professional Development (CPD). “This is great news for the event because it provides formal recognition of the value of the many learning experiences at AQE 2015 and provides delegates with reassurance that their visit will be ...

  • FTIR stars in Air Quality & Emissions Show

    Visitors to AQE 2015 in Telford (22-23 April), were treated to a practical demonstration of real-time simultaneous multigas analysis when Quantitech’s Dominic Duggan enlisted the help of three attendees to assist in the demonstration of the Gasmet portable FTIR gas analyser, the DX4040. Seeking to explode the myth that FTIR gas analysis is complicated, Dominic encouraged participants to ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you