dust extraction News

  • Cognitive Dust Management: ATMOS Global™ Launches DustAlert+™ World’s First Artificially Intelligent Dust Control and Management System.

    ATMOS Global™ (ATMOS Australia Pty Ltd – Elite Atmospheric Air Quality Modelling & Forecasting and Climate Change Research Consultants™) launches DustAlert+™ world’s first Artificial Intelligence Multi-factor Multi-criteria Dust Impact Early Warning System™ - a major ...

  • 150 PSI Vapor Steam Cleaner Boasts Extraction Plus Sanitization

    WOBURN, MA, U.S.A. -- Daimer Industries, Inc.®, the source for the number one ranked vapor steam cleaner brand on the Web, has introduced a more powerful germ stopping vacuum line. The KleenJet® Ultra 8848-360CVP series, which comes with Daimer®'s ATIS® antimicrobial technology, can produce around 150 psi of pressure and steam of nearly 386ºF. "Our new ...


    By Daimer Industries Inc.

  • Dust Emission below 5 mg/Nm³ with Airtechnic Multi-Cyclones

    Recently Airtechnic Solutions from The Netherlands has completed two multi-cyclone systems of which the dust emission, without back filter, is less than 5 mg/Nm3. Thus fulfilling local requirements for dust emission. In the course of years Airtechnic has further developed cyclone technology up to the point that with cyclones and multi-cyclones very low emission rates can be achieved, even at ...


    By Airtechnic Solutions

  • Bums on seats! Plymouth bus resolves seating dust problem

    As any public transport operator knows, bus seats capture a huge amount of dust - from atmospheric dusts through mites to human skin - none of which maintenance teams should be breathing! Having tried a wide range of solutions, Plymouth Bus have identified an effective method of controlling the clouds of dust released by fabric seating components during repair and reconditioning work. AirBench is ...


    By AirBench

  • ASTM D7202 - 11 standard test method for determination of beryllium in the workplace using field-based extraction and optical fluorescence detection

    Exposure to beryllium can cause a potentially fatal disease, and occupational exposure limits for beryllium in air and on surfaces have been established to reduce exposure risks to potentially affected workers (4, 5). Sampling and analytical methods for beryllium are needed in order to meet the challenges relating to exposure assessment and risk reduction. Field-portable sampling and ...


    By ASTM International

  • Pulp and Paper industry designs QAL 181 WS dust monitor as the must to have

    Besides being the only system totally certified on the market, the QAL 181 WS dust monitor is suitable for measuring particulate emissions from wet scrubbers (alkaline scrubbers) and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. In 2015, one of the biggest European Pulp and Paper Company with facilities in France, launched a ...


    By Environnement S.A

  • Casella Offers 24-Hour Noise & Dust Monitoring At City Of London Demolition Site

    When 24-hour real-time monitoring of noise and dust levels was required by Keltbray, the UK’s leading specialist engineering, construction, decommissioning and environmental services business, the Boundary Guardian from Casella (www.casellameasurement.com; 01234 844100) – global expert in occupational health and environmental risk ...


    By Casella

  • Nederman expands its product range - introduces the most flexible dust collector ever

    To ensure a perfect fit to any manufacturing application generating dust, smoke or fumes, Nederman introduces the L-series, a modular and fully configurable dust collector. In manufacturing facilities where dust and smoke is generated during the production process, it’s a primary objective to create a safe working environment with high production efficiency and low emissions to meet ...


    By Nederman

  • 200 Companies Account for 75 Percent of all Fabric Dust Collector and Bag Purchases

    Two hundred end users and OEMs will purchase 75 percent of all the fabric filters and replacement bags in the next ten years. This is the conclusion reached by the McIlvaine Company in N021 World Fabric Filter and Element Market. One hundred twenty-six companies will account for over 60 percent of the fabric filter system purchases in 2015 and over 50 ...


    By The McIlvaine Company

  • NOVELTY – new high-vacuum filtering unit RAPID VAC

    RAPID VAC belongs to the high-vacuum group of filtering units. The device is designed for extraction and filtration the dry dust of various sort, not containing aggressive compounds and not creating explosive conditions. It removes efficiently any impurities directly from the site of emission. Especially, it is appropriate for extraction the pollutants from the hoods of manual grinding tools, ...


    By Klimawent S.A.

  • CODEL International releases new EnergyTech range

    EnergyTech is a new range of gas and particulate analysers focused on power generation process, safety and efficiency. The EnergyTech 101 is a low cost optical dust/smoke monitor, the 301 is a new tribo-electric dust monitor that can be used in indicative and calibrated modes. The EnergyTech 200 series is a new range of mill, silo and other combustion process monitors configurable from 1 to 4 ...


    By Codel International Ltd

  • CEMTEC - Self-cleaning probe for cement plant kiln inlets

    CEMTEC provides many years of operation in cement kilns or in applications with high temperatures and/or high dust loads. The patented CEMTEC consists of a watercooled probe, which is mounted on a pneumatic propulsion device and travels in and out of the combustion process. In addition to the InSitu sensors for the instantaneous O2 and COe analysis, a heated gas ...


    By ENOTEC GmbH

  • Environmental treatmentand solutions for mining and road problems

    For years the practice of mining has depleted the world's valuable supply of raw materials. While these supplies are being consumed a large portion of them are being wasted during and after the mining process due to the continuous losses of fines through the previously unavoidable procurement of suspended particulate matter. The results of these suspended particles of raw materials are not only ...


    By Cypher Environmental Ltd.

  • Inteliair Takes Top Award

    Western Air Ducts has been awarded the presitious Energy Installer of the year at the National H&V awards in London on Thursday night. Western Air Ducts utilising the Inteliair technology to provide industry leading energy reduction in the dust and fume extraction industry. Our Inteliair product range is being installed into numerous projects undertaken by Western Air Ducts with great ...


    By Inteliair Ltd

  • Inteliair Installs first system in Canada

    We are delighted to have supplied the first Inteliair™ air control system to our new distributors in Canada for retro-fitting into a wood dust extraction system at JMV Woodworks in Abbotsford, British Columbia. Our distributor (Airmax Systems Inc.) won the order for the Inteliair™ control system thanks to its ability to maximise the efficiency of existing equipment in this ...


    By Inteliair Ltd

  • A Jarshire/Impact Air joint venture solution for SCA

    Along with a number of other extraction equipment companies, Jarshire Limited, in conjunction with their joint venture partner Impact Air, was invited by SCA to design a waste extraction system to provide for the clean and efficient removal of cookies – the waste off-cuts created in the production of toilet rolls. The requirement was to provide auto extraction of the cookie waste, deliver it to a ...


  • Jarshire and Impact Air Systems to collaborate

    Jarshire Limited, suppliers of a wide range of systems and ancillary equipment to the converting and paper-making industries, has announced a collaboration agreement with the Leicester-based waste and trim extraction specialist, Impact Air Systems. Commenting on the agreement, Director Nick Jobson said: “Impact Air equipment fits well with our product portfolio, whilst our range of ...


  • Started with the production of our New Vertical Shredder T6000

    Recent period, our engineers have been tremendously busy with new developments. We have developed a complete new plant: Namely: VERTICAL SHREDDER T-REX in four different models, 1500, 2500, 3500, and 6000. This system is particularly suitable for processing Scrap metals, electronic scrap, contaminated plastics etc. The plants are available from 90kW, tilll  440kW motors! And capacities range ...

  • French WWTP are using PCME VIEW 370 for sludge dryer particulate monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can also self heat leading to ignition and a slow ...


    By Environnement S.A

  • Romer Labs launches water-based fumonisins test kit

    Romer Labs expands its recently launched AgraStrip® WATEX product line with the introduction of AgraStrip® Total FUM WATEX - a water-based fumonisins test kit. AgraStrip® WATEX test kits are now available for aflatoxins (B1, B2, G1, G2), deoxynivalenol, zerealenone and fumonisins (B1, B2, B3) and provide a fast, simple and eco-friendly solution for on-site ...


    By Romer Labs Diagnostic GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you