dust extraction filter News

  • Dust Emission below 5 mg/Nm³ with Airtechnic Multi-Cyclones

    Recently Airtechnic Solutions from The Netherlands has completed two multi-cyclone systems of which the dust emission, without back filter, is less than 5 mg/Nm3. Thus fulfilling local requirements for dust emission. In the course of years Airtechnic has further developed cyclone technology up to the point that with cyclones and multi-cyclones very low emission rates can be achieved, even at ...


    By Airtechnic Solutions

  • Bums on seats! Plymouth bus resolves seating dust problem

    As any public transport operator knows, bus seats capture a huge amount of dust - from atmospheric dusts through mites to human skin - none of which maintenance teams should be breathing! Having tried a wide range of solutions, Plymouth Bus have identified an effective method of controlling the clouds of dust released by fabric seating components during repair and reconditioning work. AirBench is ...


    By AirBench

  • ASTM D7202 - 11 standard test method for determination of beryllium in the workplace using field-based extraction and optical fluorescence detection

    Exposure to beryllium can cause a potentially fatal disease, and occupational exposure limits for beryllium in air and on surfaces have been established to reduce exposure risks to potentially affected workers (4, 5). Sampling and analytical methods for beryllium are needed in order to meet the challenges relating to exposure assessment and risk reduction. Field-portable sampling and ...


    By ASTM International

  • Nederman expands its product range - introduces the most flexible dust collector ever

    To ensure a perfect fit to any manufacturing application generating dust, smoke or fumes, Nederman introduces the L-series, a modular and fully configurable dust collector. In manufacturing facilities where dust and smoke is generated during the production process, it’s a primary objective to create a safe working environment with high production efficiency and low emissions to meet ...


    By Nederman

  • Mobile filter units at Brazil welding show

    German air extraction equipment manufacturer Kemper has developed a portable breathing protection system, autoflow XP, to meet European environment, health and safety (EHS) regulations. Kemper will be showing the autoflow XP system along with its entire range of mobile and portable filter units at the international Brazil Welding Show in 2011 which takes ...

  • Tama S.p.A: Pulco Air filter HTB

    The product The Pulco Air HTB baghouse dust collector is a dry filtration system used to purify the air of suspended solid particles. Its installation allows treatment of a vast range of pollutants and guarantees the quality of the air in the production environment and protection for workers. Filter inlet is composed of a pre-chamber, which recovers the ...


    By TAMA S.p.A.

  • 200 Companies Account for 75 Percent of all Fabric Dust Collector and Bag Purchases

    Two hundred end users and OEMs will purchase 75 percent of all the fabric filters and replacement bags in the next ten years. This is the conclusion reached by the McIlvaine Company in N021 World Fabric Filter and Element Market. One hundred twenty-six companies will account for over 60 percent of the fabric filter system purchases in 2015 and over 50 ...


    By The McIlvaine Company

  • NOVELTY – new high-vacuum filtering unit RAPID VAC

    RAPID VAC belongs to the high-vacuum group of filtering units. The device is designed for extraction and filtration the dry dust of various sort, not containing aggressive compounds and not creating explosive conditions. It removes efficiently any impurities directly from the site of emission. Especially, it is appropriate for extraction the pollutants from the hoods of manual grinding tools, ...


    By Klimawent S.A.

  • New sheer slitting, air conveying and filtering system for Owens Corning

    Following a recently formed partnership agreement with Impact Air Systems, Jarshire Limited has installed a comprehensive shear slitting, air conveying and filtering system on a Universal reeling machine at Owens Corning plant at Liversedge, West Yorkshire. Completed in October 2006, the Owens Corning objective was to provide better working conditions for staff, increase machine speed and ...


  • CEMTEC - Self-cleaning probe for cement plant kiln inlets

    CEMTEC provides many years of operation in cement kilns or in applications with high temperatures and/or high dust loads. The patented CEMTEC consists of a watercooled probe, which is mounted on a pneumatic propulsion device and travels in and out of the combustion process. In addition to the InSitu sensors for the instantaneous O2 and COe analysis, a heated gas ...


    By ENOTEC GmbH

  • MobilePro, the self-cleaning fume extractor for the professional welder

    Plymovent is proud to present the MobilePro; the mobile welding fume extractor for professional welders that need a flexible solution. This unit is designed to remove welding fumes on-site in confined spaces and spaces that are difficult to reach by fixed welding fume extraction systems, for example in the middle of a workshop or reversely, in an outer corner of a facility. This ...


    By Plymovent Group BV

  • Romer Labs launches water-based fumonisins test kit

    Romer Labs expands its recently launched AgraStrip® WATEX product line with the introduction of AgraStrip® Total FUM WATEX - a water-based fumonisins test kit. AgraStrip® WATEX test kits are now available for aflatoxins (B1, B2, G1, G2), deoxynivalenol, zerealenone and fumonisins (B1, B2, B3) and provide a fast, simple and eco-friendly solution for on-site ...


    By Romer Labs Diagnostic GmbH

  • Nederman lowers the price of clean air: New compact and efficient high vacuum units

    Untitled Document Nederman, the work environment company, is now launching two new high vacuum units, L-PAK 150 and L-PAK 250, onto the market. The units, destined to replace several of the ...


    By Nederman

  • A Jarshire/Impact Air joint venture solution for SCA

    Along with a number of other extraction equipment companies, Jarshire Limited, in conjunction with their joint venture partner Impact Air, was invited by SCA to design a waste extraction system to provide for the clean and efficient removal of cookies – the waste off-cuts created in the production of toilet rolls. The requirement was to provide auto extraction of the cookie waste, deliver it to a ...


  • New Model 300 Roundaire Cleanable Fume Extractor

    Sentry Air Systems Model 300 Roundaire is a mobile source-capture fume extraction system that helps protect the operator’s breathing zone from harmful airborne fumes and particulates found in many industrial settings due to welding, metal working, solvents, powder handling and ...


    By Sentry Air Systems, Inc.

  • French WWTP are using PCME VIEW 370 for sludge dryer particulate monitoring

    The amount of dust produced in the dryer and later processing plant is affected by the type of dryer installed. As sewage sludge dust has a similar range of figures to wood flour, there is the potential for a dust explosion to occur in the main dryer, dust collection and handling plant, pelletiser and final product discharge plant. The material can also self heat leading to ignition and a slow ...


    By Environnement S.A

  • $61 Billion flow control and treatment market in 2016 in the energy sector

    The power, refining and oil and gas industries will combine to purchase pumps, valves, instrumentation, filters, clarifiers, separators scrubbers, dust collectors and other air and liquid treatment equipment totalling $61 billion in 2013. This is the conclusion in Air/Gas/Water/Fluid Treatment & Control:  World ...


    By The McIlvaine Company

  • New Floor Steamer with 1,200 Watt Vacuum and 4,850-Watt Steam

    Daimer Industries, Inc.®, a company that has been serving commercial cleaning professionals for more than a decade, has revealed availability of a new floor steamer. The new KleenJet® Ultra 8444-360 CVP steam cleaner comes with an ATIS® antibacterial subsystem. The subsystem employs an ionic-disinfecting technology that has been deemed EPA-compliant and laboratory-tested for ...


    By Daimer Industries Inc.

  • Innovations from Plymovent at Metalex

    At the Metalex in Bangkok Plymovent will show a wide range of professional products varying from mobile units, wall mounted units, extraction arms and fans. People can experience the added value of a cleaner and healthier working environment available by visiting the Plymovent booth. GoLine At the Metalex Plymovent will introduce the ...


    By Plymovent Group BV

  • 25 Years of Success – Outokumpu Stainless DC Plasma Smelting Facility

    Design is not just what it looks and feels like. Design is how it works. Between 1982 and 1987, British Steel (Outokumpu today) made extensive investigations into the treatment of steel dust. Their research was far and wide and covered off many various methods of recycling, including alternative to plasma technologies. But, in 1985, they engaged Tetronics International to carry out a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you