dust monitoring equipment News

  • Why monitor dust in the workplace?

    Almost any place of employment can present a potential threat to health and safety from airborne particulates and aerosols. It is important to note, however, that dust hazards are not necessarily visible to the human eye and that the finest particles can represent the greatest threat because of their ability to travel deepest into the lungs. Effective monitoring is therefore key to the ...


    By Ashtead Technology Ltd

  • Workshop focuses on dust protection and monitoring

    Ashtead Technology, TSI and the Health & Safety Laboratory (HSL) recently collaborated to deliver a workshop focusing on the environmental and safety hazards presented by dust and other particulate matter. Alan Hasson and Josh Thomas from Ashtead Technology provided an overview of the justification for dust monitoring in the workplace, and Nicholas Baxter from HSL described the requirements ...


    By Ashtead Technology Ltd

  • Dust Monitoring Workshop Draws Crowds

    The instrumentation specialists Ashtead Technology and monitoring instrument manufacturer TSI recently co-hosted a technical workshop which focused on monitoring workplace and environmental air quality. The level of interest in the workshop was so high that some applications to attend had to be declined once registration was full. “We were delighted with the level of interest,” said ...


    By Ashtead Technology Ltd

  • Unique dust monitors for any application

    The Latest TSI Sidepak Personal Aerosol Monitors Have Been Added To The Ashtead Technology Range Of Particulate Matter (PM) Monitors. “We Were So Impressed With The Unique Features Of These Instruments, That We Immediately Added Them To Both Our Rental And Sales Portfolios,” Says Ashtead’s Regional Sales Manager Josh Thomas. “Many Occupational Exposure Applications Are ...


    By Ashtead Technology Ltd

  • Real-Time Dust Monitoring: what are the benefits for the workforce?

    Approximately 14.8 million adults in the United States have been diagnosed with chronic obstructive pulmonary disease (COPD) with an estimated 12 million people likely to have the condition, but not yet be diagnosed.[1] Many of these cases could be linked to occupational exposure from dangerous airborne dusts, fumes and other substances. ...


    By Casella

  • Flexible choice of air quality and emissions monitoring equipment

    The Ashtead Technology stand (No. 77) at AQE 2017 will feature a comprehensive range of both workplace and emissions monitoring instruments including the latest technologies from TSI and Testo. “With a range of the cutting edge technologies, and a choice of financial options, visitors will be able to ensure that their instrumentation matches both their needs and budget,” says Josh ...


    By Ashtead Technology Ltd

  • Shawcity Seminar 1: Occupational Dust Monitoring, RCS and Diesel Fume.

    Wednesday 22nd June saw the first of the 2016 seminars hosted by Shawcity, which offer an independent focus on key issues facing those who work in occupational hygiene, environmental monitoring and health and safety. The event, held at Wrag Barn Golf and Country Club, Highworth, focused on occupational dust monitoring, RCS and diesel fume. Shawcity welcomed over 40 delegates on the day ...


    By Shawcity Limited

  • Measure to Manage: ET launches new monitor for construction’s “dastardly dust”

    Leading air quality monitoring equipment specialist Enviro Technology Services Plc has launched a new monitor specifically developed with construction dust applications in mind. With both the Institute of Air Quality Management and the Mayor of London recently publishing guidance on assessing dust emissions from demolition and construction sites, the launch of the new, web-enabled monitor ...

  • British coal mines choose Casella’s intrinsically safe Tuff™ pump for underground dust monitoring

    Bedford-based Casella CEL (www.casellameasurement.com; 01234 844100) has joined forces with Environmental Scientifics Group (ESG), the UK’s leading provider of testing, inspection and compliance services, to supply over 70 Intrinsically Safe (IS) TUFF™ pump for monitoring coal miners’ exposure to dust to seven mines across England and ...


    By Casella

  • Columbus steel castings to pay $825,000 and install monitoring equipment as sentence for violating clean air act

    Columbus Steel Castings Company, Inc., located on the south side of Columbus, Ohio, was sentenced today to pay $825,000 and install additional devices to prevent air pollution after pleading guilty on July 28, 2011 to six counts of violating the Clean Air Act. The violations include failing to operate air pollution controls, failing to report violations, failing to perform required monitoring, ...

  • Date announced for popular workplace and ambient dust workshop

    Following the success of a similar event last January, TSI and Ashtead Technology have organised another workshop focusing on workplace dust, aerosols and environmental particulates. The event, which is free to attend, will take place on Wednesday 11th January 2017 at TSI’s headquarters in High Wycombe. Ashtead’s Regional Sales Manager Josh Thomas recommends early booking: “This ...


    By Ashtead Technology Ltd

  • Why the dust can’t settle on the UK’s construction industry

    Following unscheduled spot checks by the Health & Safety Executive (HSE) at the end of last year, there is a powerful wind of change blowing across UK construction sites. So what is the reason for these visits? To examine the measures being taken to protect the long term health of construction workers with the aim of bringing these standards up to the same high level as ...


    By Casella

  • Enviro-Equipment Inc. Launches its Environmental Remediation Systems and Equipment Decommissioning Service Nationwide

    Enviro-Equipment Inc., an industry leader in renting, selling and manufacturing environmental monitoring equipment, has launched its environmental remediation systems and equipment decommissioning service nationwide. As a result of this expansion, large industrial sites and military bases across the US can have their remediation systems safely and ...


    By Enviro-Equipment, Inc.

  • Site Remediation - Emissions Boundary Monitoring

    The remediation of contaminated land sites can prove to be a challenging undertaking.  There is considerable risk of chemical exposure to both the onsite workforce and to surrounding communities. To offsite receptors, the remediation process itself can become a significant route of exposure, with the excavation and uncovering of otherwise trapped contaminants resulting in potential ...


    By Shawcity Limited

  • `Not all particles are equal`, Air Monitors

    Recently, the Prime Minister’s car was covered by a thin layer of Saharan dust and air quality was suddenly a lead item in the national news. The dust itself does not pose a serious hazard to health in comparison with the finer particles (from diesel engines for example) that travel deep into the lungs, but Jim Mills, MD of Air Monitors, believes that the media attention that this event ...


    By Air Monitors Ltd.

  • Building trust in environmental monitoring data

    The accuracy and reliability of environmental monitoring data is of paramount importance, and certification schemes are available for instrument manufacturers to demonstrate the performance characteristics of their equipment. In the following article, Josh Thomas, from Ashtead Technology, will explain how the MCERTS scheme for environmental monitoring equipment ...

  • Allweiler Pumps approved for explosive atmospheres. New ATEX certificate for dust

    For many years progressing cavity pumps, peristaltic pumps, and macerators manufactured by Allweiler AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres when used properly. But now – since end 2008 – they are also certified for use in dust-laden explosive atmospheres. The ATEX certificate confirms that Allweiler pumps now fully comply with EU directive 94/9/EC ...


    By ALLWEILER GmbH

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • Stricter monitoring requirements for combustion emissions

    The new monitoring requirements being imposed on Medium Combustion Plants (MCPs) and Large Combustion Plants (LCPs) in Europe is symptomatic of environmental initiatives affecting a wide variety of industries. In the following article, Dr Andrew Dixon from Gasmet Technologies UK (formerly Quantitech) explains how instrumentation manufacturers are responding to these new challenges. The ...


    By Gasmet Technologies Oy

  • Johnson Matthey helps TfL with London`s dust suppressant trial

    Johnson Matthey, world leader in the production of catalytic systems for emission control in light and heavy duty vehicles, is supplying its CRT® filter technology and PIO-CAN filter monitor to the tractor currently being used in a dust suppressant trial.  Trials are occurring in specific areas of London that have been identified as at risk of exceeding the limit, set by the EU, for fine ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you