eddy current separator News

  • Green light for Eddy Current Separator

    Those Eddy Current separators that were expensive and of limited possibilities once, now have become a wise choice. Obtaining metal sorting machinery engineers seem to transcend the traditional thinking, presenting more and more intelligent and capable machines. COGELME, the Italian manufacturer of waste recycling equipment, mainly of ferrous and non-ferrous metals separators, has studied ...

  • RevX – The New Eddy Current Separator

    Eriez’ European range of Eddy Current Separators has been further enhanced with the launch of the all-new RevX model. The RevX Separator is the result of a specific design programme aimed at improving the level of separation and increasing metal recovery. Like all Eddy Current Separators, the new RevX Separator has a strong magnetic rotor that revolves at high speeds inside a non-magnetic shell. ...


    By Eriez Magnetics Europe Ltd

  • Maximal exploitation of Eddy Current Separator

    It separates non-ferrous metals from various type of recyclable material, but separation purity depends first of all on machine’s magnetic power, which is transformed to eddy current. Higher magnetic power - higher separation purity. Not all Eddy Current Separators have the same separation results as various manufacturers achieves different magnetic power with their engineering solutions. ...

  • Eddy current separator sales reach all time high

    Recent increases in the value of aluminium have put the sales of Master Magnets Eddy Current Separators at an all time high. The Mastermag factory has become extremely busy over the last month as the production team have been working tremendously hard to handle the recent surge in ECS output. The amount of Eddy Current Separator sales in the last month accounts for more than 26% of the total ECS ...


    By Master Magnets Ltd

  • Ecohog Windshifter and HogMag Eddy Current Separator Set Sail for North America

    Ecohog Ltd is delighted to announce their recent sale of the EH1500-M2 Windshifter and HogMag to the North American waste and recycling industry. Ecohog’s New Jersey based customer recognises waste as a resource and is continually aiming to achieve the highest level of separation to create quality resources. The EH1500-M2 machine and the HogMag eddy current separator are being introduced to ...


    By EcoHog Ltd

  • Premier of the new eddy current separator CanMaster - The master for coarse material at STEINERT

    Ecomondo in Rimini/Italy and Pollutec in Lyon/France were the venues where Steinert’s new eddy current separator—the CanMaster—was first presented to the world. The reception it received was great! “At last”, said the visitors, “no more compromises. The STEINERT technology is finally available at a good entry-level price'. The CanMaster gets its name because its target is coarse pieces of ...

  • PR1106 eriez introduces new eccentric Eddy current separator (eriez magnetics)

    Eriez Magnetics Europe Ltd recently introduced its new RevX-E Eccentric Eddy Current Separator.  It is the first Eddy Current Separator from Eriez to have an eccentric magnetic rotor to allow single point separation, which is different from the usual concentric design.  It provides unique separation solutions for the dynamically changing recycling industry.   Like all Eriez Eddy ...


    By Eriez Magnetics Europe Ltd

  • Eriez new eccentric rotor for RevX-E® eddy current separator

    Eriez, world leading authority in magnetic separation, announce the release of a new rotor design for its RevX-E® eddy current separator, Eriez’ most recent addition to its extensive line of recycling equipment. The new design of the eccentric magnetic rotor brings the greatest recovery of valuable non ferrous metals for application in automobile shredding, glass cullet, plastics, ...


    By Eriez Magnetics Europe Ltd

  • Mastermag take on competitors Eddy current repairs

    With Eddy Current Separators becoming a ‘must have’ in the recycling industry, many companies are purchasing new units for their plants to maximise their profits. However, at the moment it is understandably very difficult for companies to invest in new units and many are now choosing to refurbish and repair their existing Eddy Currents to ensure that the highest levels of separation are achieved, ...


    By Master Magnets Ltd

  • EDDY GOES TO CHINA

    One of the main steel recyclers in China, Ghangzhou Asia Steel Ltd, has welcomed our Eddy Current Separator plant – which comes with a vibratory feeder and drum magnet – as the ideal solution for sorting fine particles. Based in the region of Whampoa, the company operate an ELV (End of Life Vehicle) plant and needed to efficiently recycle the finer scrap materials. Particles that measure between ...


    By Master Magnets Ltd

  • Three Eddy current separators deliver maximum return - domestic waste clinkers are metal free

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. of Waalre and Feniks Recycling BV of Hengelo delivers a maximum return to end processor Twence Afvalverwerking B.V. of Hengelo. Expansion of the existing line with three Eddy current separators ensure a maximum yield of recycled metals from domestic waste clinkers. The separators remove large, medium as well as very ...


    By Goudsmit Magnetic Systems BV

  • Metals separation experience

    Various cases solutions of metals separation from electronic scrap, plastic, rubber, urban waste and any other material you will find at Enstorga-Enteco exhibition in October 2009. Italian metal separators producer and skilled specialist - COGELME S.A.S brings extensive metals sorting and recycling experience for individual cases discussions, exchange of information and just for meeting or ...

  • Mobile non-ferrous metals separator

    Mobile metals separatorFor non-ferrous metals separation from plastic: a simple system, but might catalyze plastic recycling market.This year Cogelme - manufacturer of metals separators from North of Italy - combined Eddy Current Separator with a Worm Screw to a small, comfortable system, capable to separate non-ferrous metals from grinded plastic and download directly into big bags. Main ...

  • Non-ferrous metals separator by Cogelme

    Functioning of Eddy Current separator for non-ferrous metals separation is based on physics low, thus has a clear, understandable and proved operation.Cogelme is one of Italian most skilful manufacturers of this technology. Company was founded and guided by important technology specialists. Which with physics and engineering science created a perfect force fields on eddy current separator to ...

  • Non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction. It involves mainly shredded aluminium components but also non-ferrous metals such as ...

  • More Magnetic Separation to Achieve EU Targets?

    The UK recycling publication MRW featured a news article entitled ‘Metal targets matter’ in the 11 October 2014 issue. The article stated that Alupro, the UK’s aluminium packaging industry association, expressed concerns at suggested EU packaging recycling targets for 2030. Alupro quoted recycling rates for aluminium packaging as now being over 43% but also added “we ...


  • Eriez Demonstrates Nonferrous Fines Separation at RWM

    Eriez Magnetics Europe Ltd will be present at RWM 2014 held between16th and 18th of September at the NEC, Birmingham, UK and demonstrate new developments with its range of eddy current separators (ECS) RevX-E. This advanced equipment will enable waste processors to achieve an extremely high level separation of nonferrous material from waste material fines. Eriez’ eddy current separator ...


    By Eriez Magnetics Europe Ltd

  • 600 & counting - Merger in magnetic separation technology

    Combination of two organisations almost 600 days ago has resulted in the emergence of a strong, capable and dynamic force in magnetic separation technology. Steinert Sturton-Gill Magnetics of Melbourne, Australia, began with the foresight and needs of two separate entities, half a world apart. While both were leaders in their respective fields and both share extensive expertise in ...

  • Interplas 2014 – Leading The Way With Magnetic Separation

    Bunting Magnetics Europe Ltd was the only magnetic separation supplier exhibiting at Interplas 2014 (staged at the NEC in Birmingham between 30th September and the 2nd October 2014).  Simon Ayling, the Bunting Europe Managing Director explained: “For us at Bunting, supplying and supporting the plastics industry has always been vitally important.  Whether that is working with a ...


  • Bottom ash Mobile Non Ferrous Metals Separation Machine

    RNS Engineering proudly presents her New Generation high capacity Mobile (for picture see our Website). Non-Ferrous Metals Separation Machine. •The New Mobile Non-Ferrous Metals Separation Machine is designed to separate Non-Ferrous metals from various waste fractions (e.g. bottom-ash ex waste incineration plants) •This machine combines the treatment of two different sizes of fractions by ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you