effluent analysis News

  • QuickTOC®effluent

    Precise TOC measurement at the WWTP's effluent - Ideal for drinking water monitoring - Brand new product for Water Analytics, for chemical engineering and water treatment. With the 21st product in 20 years LAR sets new benchmarks with its latest product design  QuickTOC®effluent by combining accuracy of measurement with low maintenance efforts. For this development the main focus ...


    By LAR Process Analysers AG

  • Ensuring your biofuels effluent meets regulatory limits

    The U.S. Environmental Protection Agency (EPA), as well as other regulatory agencies around the world, have established limitation guidelines for discharges of “oily wastes” from facilities utilizing any type of oil and grease in their manufacturing process. However, recently several biodiesel plants in the US have been fined for illegally discharging vegetable-based oil and grease and polluting ...


    By Spectro Scientific

  • Free Workshop on Industrial Discharges: `Are you paying too much for your effluent?`

    HACH LANGE is hosting a free workshop on wastewater cost minimisation. Taking place in Newcastle Upon Tyne on Tuesday 4th October, the workshop will provide attendees with an insight into the ways in which self- monitoring can ensure regulatory compliance and help reduce costs. The workshop will include both practical and classroom sessions, and explain the main factors affecting trade effluent ...


  • Watson-Marlow dosing pumps facilitate ‘ready-made’ effluent treatment plant

    New initiative from Lhoist combines Neutralac ‘smart’ liquid lime with peristaltic pump High flow process pump allows on-site treatment of acidic waste streams System comparable with caustic soda – many already sold Neutralac SLS45 high strength liquid lime from Lhoist UK Ltd is proving an irresistible solution ...

  • On-Site Wastewater Analysis

    The US EPA, as well as other governmental regulatory agencies, have instituted stricter regulations covering discharges of “oily wastes” from facilities into publicity owed treatment plants (POTWs) facilities, forcing numerous industries to monitor their effluent more closely prior to discharge. This regulations affect such industries as food – both processors and restaurants, metal fabrication, ...


    By Spectro Scientific

  • Severn Trent Laboratories MCERTS Accredited for Water Analysis

    Severn Trent Laboratories (STL) can now provide MCERTS accredited analysis for sampling and chemical testing of water. On 1st June 2010, STL were granted accreditation to 17025:2005 for the Environment Agency MCERTS Performance Standard for undertaking sampling and chemical testing of water (Version 1.1). We can provide a comprehensive service for organisations required to carry out Operator Self ...


  • IR analysis helps industries comply with regulations for wastewater

    For over 30 years, the Clean Water Act has been governing water pollution. Initially the focus was on traditional “point source” polluters such as municipal sewage treatment plants and industrial facilities. The focus is now on the “non-point sources” such as Sanitary Sewer Overflows (SSOs) which are a major contributor to non-point source pollution. This is due to the increase in the ...


    By Spectro Scientific

  • Analysis times cut by 75% at paper recycling plant

    A high-speed, high-temperature HT200S laboratory digester from HACH LANGE has helped one of Europe’s largest recycled packaging companies to cut analysis times by 75%. This process has also enabled Smurfit Kappa SSK to optimise the efficiency of the anaerobic digestion to generate quality biogas, which helps to recycle the effluent waste produced on site. By deploying the advanced HT200S, along ...


  • New trace chemical analyser for onsite analysis

    Quantitech (Milton Keynes) has announced the launch of the FROG-4000™, a rugged, portable instrument capable of analysing trace levels of individual volatile organic compounds (VOCs) in air, soil and water. “With this technology, operators will be able to conduct fast on-site analysis in a range of environmental, health and safety applications,” says Quantitech’s Dr Andrew ...


    By Quantitech Ltd

  • Maxxam receives MDDELCC accreditation for Radium 226 and Tritium analysis

    Maxxam’s Becquerel Laboratories has recently received accreditation by the Ministère du Développement durable, de l’Environnement et de la Lutte contre les changements climatiques (MDDELCC) to ISO/CEI 17025 standards for analysis of Radium 226 and Tritium in drinking water and Radium 226 in effluent. Radium 226 testing is a requirement under Canadian federal Metal Mining ...


    By Maxxam Analytics

  • Level Sensors Market Global Forecast and Analysis 2013 - 2018

    Level measurement is a very basic process used across several industrial segments. Due to advancement in level sensing technologies, level sensors are expected to show proper growth during the forecast period. The market has entered into a transition from contact type of measurement to non-contact type of measurement over the past five ...


  • FTIR meets Fire Testing needs for toxic gas analysis

    One of the most dangerous aspects of a fire is the toxic gases that can arise from the process of combustion.To save lives and develop safer materials for airplanes, trains, and buildings, it is vital to identify and measure the gases that are released when products and materials ...


    By Gasmet Technologies Oy

  • ASTM D7511 - 12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

    Cyanide and hydrogen cyanide are highly toxic. Regulations have been established to require the monitoring of cyanide in industrial and domestic wastewaters and surface waters. This test method is applicable for natural water, saline waters, and wastewater effluent. The method may be used for process control in wastewater treatment facilities. The spot test outlined in ...


    By ASTM International

  • TOC, TNb, TP and COD - Combined in One Unit

    The control of waste water effluent and local waste water treatment plants takes a special position - from an ecological as well as economic point of view. The sum parameters TOC, COD, TP and TNb belong to the most important in the waste water sector. LAR AG provide with its QuickTOCNPO a measurement system for measuring the four parameters in one single unit. All parameters are determined ...


    By LAR Process Analysers AG

  • PHOENIX Process Equipment Co. Introduces the PHOENIX OPTIMIZE Program

    PHOENIX Process Equipment Co., Louisville, Kentucky, is introducing the PHOENIX OPTIMIZE effluent treatment and fines refuse process evaluation program. With over 20 years of experience supplying waste fines slurry sedimentation thickening, water clarification, and dewatering technologies, PHOENIX is bringing its experience and analytical resources together to offer producers a comprehensive ...

  • How Shasun, a major Pharmaceutical manufacturer, maximises the investment in it`s operation critical Biological Wastewater Treatment Plant and improves it’s security at the same time.

    At the Dudley Shasun facility we have a 7500 m3 biological treatment plant that can treat up to 36 tonnes of waste COD per day. Part of this capacity is utilised to treat up to 15 tankers per day of third party aqueous waste.  The waste is very varied, covering everything from leachates at only 2000ppm COD to industrial waste at up to 500,000ppm COD. The Strathkelvin respirometer forms a ...

  • New application notes published for the PeCOD Chemical Oxygen Demand (COD) Technology

    Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) are important diagnostic parameters for the determination of water quality in natural waterways and waste streams. The standard BOD test requires five days to complete, and is therefore unable to provide continuous monitoring of organic load. COD is therefore often used for BOD screening. The PeCOD method for COD analysis is a new ...


    By MANTECH INC.

  • A Unique Video about NEFCO’S Next Generation Density Current Baffle

    Here’s an entertaining 3-minute video about NEFCO’S Stamford Baffle 2.0®, the next generation Stamford Density Current Baffle. SB 2.0 is the result of an in-depth study of the design features that determine baffle performance, using computer analysis and modeling. The new baffle provides the most cost-effective improvement in clarifier performance available today. SB 2.0 ...


    By NEFCO, Inc.

  • MTI Diagnostics online heavy metal monitor undergoes scrutiny of US EPA

    Environmental and diagnostic specialists, MTI diagnostics, (Fareham, UK) have completed a stringent evaluation of its MTI OVA 5000 system at the US Environmental Protection Agency (EPA) Vineland Chemical Company Superfund site in Cumberland County, New Jersey for monitoring arsenic in the effluent from the waste water treatment plant. The EPA is responsible for the cleanup of the site while the ...

  • Municipal Wastewater Treatment Plant Moving to 24/7 COD Monitoring

    The University of Guelph, based in Ontario Canada conducted a detailed study to demonstrate that PeCOD could accurately correlate to CODCr and rapidly measure organic matter for the City of Guelph Waste Water Treatment ...


    By Camlab Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you