emissions analyser News

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • Gasmet raises the bar for emissions analysers

    Gasmet Technologies, the Finland based instrumentation manufacturer, has announced that its FTIR-based Continuous Emissions Monitoring System (CEMS) has received approval from TÜV, the international certification body, for the EN 15267-3 standard, which is more recent and more stringent than the existing German Type Approval and QAL1 certificate, EN14181. This means that the Gasmet CEMS is ...


    By Gasmet Technologies Oy

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • FTIR analyser reveals surprising solution

    Emissions analysers have to be checked annually by certified testers and during recent functionality tests for a Gasmet FTIR continuous emissions monitor (CEM) at a UK Energy from Waste plant, the Nitrogen Dioxide span check results were found to be incorrect. A subsequent investigation revealed surprising results that would not have been apparent had the plant been using traditional CEMs. NO2 ...


    By Quantitech Ltd

  • MCERTS for portable and fixed FTIR analysers

    Quantitech is delighted to announce that the Gasmet Continuous Emissions Monitoring System (CEMS II e) and the portable (DX4000) FTIR analysers have been awarded an MCERTS certificate (Sira MC030014/08) demonstrating compliance with the MCERTS Performance Standards EN15267-3 & QAL 1 as defined in EN 14181. The certificate demonstrates enhanced performance across an extended range of gases. ...


    By Quantitech Ltd

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • Protea Advanced FTIR Analyser Training Course

    Protea will be running an Advanced Analysis course for user of FTIR gas analysers for process and emissions measurements on 11th-12th October 2016. The PDF offered our latest support documentation for our valued partners and users of Protea's range of FTIR gas analysers. Please contact us for more information. For more information please download the PDF below. We are delighted to offer you the ...


    By Protea Limited

  • Latest multigas FTIR analysers can be hired

    FTIR gas analysers have become popular in a wide variety of gas detection and monitoring applications because of their ability to measure almost any gas. However, the cost of this equipment can exceed the budgets of those that could benefit from this sophisticated technology, so Quantitech has established a small range of FTIR gas analysers that are available for hire. Typical applications for ...


    By Quantitech Ltd

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • Gas analyser helps reveal NITRABAR success

    A portable FTIR multiparameter gas analyser from Quantitech is helping researchers at the University of Strathclyde to prove the efficacy of a novel technique ('NITRABAR' - an EC LIFE Environment Project) that helps remove nitrate pollution from groundwater. The NITRABAR system uses permeable reactive barrier technology and consists of a trench containing a mixture of natural materials, which ...


    By Quantitech Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • ET MARINE’S SEANOX ANALYSER GETS DNV ENDORSEMENT

    Untitled Document ET Marine’s compact SeaNox analyser – which measures oxides of nitrogen (NOx) emitted from a ship’s stack – has just been granted a prestigious Det Norske Veritas (DNV) ...

  • FTIR Gas Analyser Supports Carbon Capture Research

    Quantitech has commissioned an advanced Gasmet FTIR multiparameter gas analyser at the UK Carbon Capture & Storage Research Centre (UKCCSRC) facility near Sheffield. This Pilot-scale Advanced Capture Technology (PACT) facility was created to catalyse and support both industrial and academic research. PACT Business Development Manager Dr Kris Milkowski, from the University of Leeds, says: ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you