emissions monitoring instrument News

  • Emissions monitoring conference topics announced

    The first day of the AQE 2017 conference will address the monitoring of difficult gases and dust components in industrial emissions, with presentations from an international panel of experts. AQE 2017 will take pace in Telford (UK) on 24th and 25th May and registration is now available at ...

  • Site Remediation - Emissions Boundary Monitoring

    The remediation of contaminated land sites can prove to be a challenging undertaking.  There is considerable risk of chemical exposure to both the onsite workforce and to surrounding communities. To offsite receptors, the remediation process itself can become a significant route of exposure, with the excavation and uncovering of otherwise trapped contaminants resulting in potential ...


    By Shawcity Limited

  • Stricter monitoring requirements for combustion emissions

    The new monitoring requirements being imposed on Medium Combustion Plants (MCPs) and Large Combustion Plants (LCPs) in Europe is symptomatic of environmental initiatives affecting a wide variety of industries. In the following article, Dr Andrew Dixon from Gasmet Technologies UK (formerly Quantitech) explains how instrumentation manufacturers are responding to these new challenges. The ...


    By Gasmet Technologies Oy

  • Lumex Instruments for mercury monitoring at ICMGP 2013

    During the 11th ICMGP 2013 conference Lumex Instruments and UK partners Spectronic-Camspec will exhibit the range of our mercury analyzers. The products to be shown cover the widest range of applications for mercury monitoring with the use of the unique Zeeman AAS technology. The range of portable systems will be represented by classic multi-purpose RA-915M analyzer and by miniaturized Light-915 ...


    By Lumex Instruments Group

  • New world record for mercury emissions monitor

    Gasmet Technologies is delighted to announce that its Continuous Mercury Monitoring system (CMM) is the first instrument to be certified for monitoring at the low levels required by industry and regulators. “This is extremely important news,” says Matti Haapala, Gasmet’s Application Development Manager. “In the past the low concentration levels in industrial emissions have ...


    By Gasmet Technologies Oy

  • Learn More About the Art of Emissions Monitoring

    E Instruments is proud to present our newest report on the complex art of emissions monitoring and gas sampling. Every application encompasses different system considerations and there really is no “one-size-fits-all” approach to proper emissions monitoring. The purpose of this technical note is to provide an understanding of what types of equipment are needed for a wide range of ...

  • New integrated continuous emissions monitoring capability

    Quantitech has a long-standing reputation for the supply and service of high quality environmental monitoring instruments in the UK. However, following acquisition by Gasmet Technologies, the company has invested in the resources necessary to design, deliver, install and commission complete integrated emissions monitoring systems, and a video has been published on the Quantitech website ...


    By Quantitech Ltd

  • Mercury emissions monitor draws crowds in Edinburgh

    Gasmet unveiled a new continuous mercury monitoring system (CMM) at Mercury 2013 in Edinburgh, Scotland, during the ‘International Conference on Mercury as a Global Pollutant’. Expressing his delight with the number of enquiries received, Gasmet Europe’s Antti Heikkilä said: “With delegates from over 50 countries, the conference was extremely well attended and our ...


    By Gasmet Technologies Oy

  • New world record for mercury emissions monitor

    Gasmet Technologies is delighted to announce that its Continuous Mercury Monitoring system (CMM) is the first instrument to be certified for monitoring at the low levels required by industry and regulators. “This is extremely important news,” says Matti Haapala, Gasmet’s Application Development Manager. “In the past the low concentration levels in industrial emissions have ...


    By Gasmet Technologies Oy

  • enitial chooses TDL-500 for emissions monitoring

    As one of the UK's leading independent providers of emission and pollution monitoring, control and management services, enitial required a portable methane detector that would be efficient at recording and storing very detailed data. Following an increasing demand for emissions mapping surveys to be carried out from their customers, particularly those concerned ...


    By Geotech

  • Mobile monitoring station assesses diesel emissions

    Researchers in Greece are using a Gasmet FTIR multiparameter gas analyzer, deployed in a mobile van (MOBILAB), to undertake exhaust gas analysis for comparison with ambient air quality data. “This enables us to undertake temporal and spatial air quality measurements from within traffic, measuring emissions during different traffic conditions,” says Apostolos Tsakis, from the Aerosol ...


    By Gasmet Technologies Oy

  • Gasmet launches new Mercury emissions monitor

    Gasmet, the Finland based manufacturer of advanced gas analysis systems, will launch a new continuous mercury monitoring system (CMM) at Mercury 2013 in Edinburgh, Scotland (28th July – 2nd August). Gasmet Europe’s Antti Heikkilä says “The CMM employs cold vapour atomic fluorescence (CVAF) to deliver very low detection limits at a significantly lower cost than other ...


    By Gasmet Technologies Oy

  • Mobile monitoring station assesses diesel emissions

    Researchers in Greece are using a Gasmet FTIR multiparameter gas analyzer, deployed in a mobile van (MOBILAB), to undertake exhaust gas analysis for comparison with ambient air quality data. “This enables us to undertake temporal and spatial air quality measurements from within traffic, measuring emissions during different traffic conditions,” says Apostolos Tsakis, from the Aerosol ...


    By Gasmet Technologies Oy

  • E Instruments Sheds Light on the Critical Monitoring of Warehouse Ambient Air Quality and Forklift Emissions in Recent Case Study

    Since 2001, our in-house designers, manufacturers, and marketers have ensured that our customers have the instrumentation and calibration equipment that they need in the field. Several of our patented indoor air quality monitors and combustion analyzers distinguish themselves as the most powerful, versatile, and portable devices, across the global ...

  • testo NanoMet3: The Golden Instrument for Real Driving Emissions RDE

    With an eye on Real Driving Emissions (RDE) proposed in forthcoming European Emission Standards for the type approval of light-duty vehicles, Testo SE & Co. KGaAhas unveiled an innovative portable instrument for solid nanoparticle counting and classification. Testo NanoMet3 measures number concentration in a wide range from 1E4 to 3E8 #/ccm and average diameter in the ...


    By Testo SE & Co. KGaA

  • Flexible choice of air quality and emissions monitoring equipment

    The Ashtead Technology stand (No. 77) at AQE 2017 will feature a comprehensive range of both workplace and emissions monitoring instruments including the latest technologies from TSI and Testo. “With a range of the cutting edge technologies, and a choice of financial options, visitors will be able to ensure that their instrumentation matches both their needs and budget,” says Josh ...


    By Ashtead Technology Ltd

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Turkish Delight with CEM 2014 Emissions Monitoring Event

    The organisers of CEM 2014, the emissions monitoring event that took place in Istanbul during May, have expressed their delight with the feedback that they received following this year’s Conference and Exhibition. “Increasing awareness of air quality issues coupled with international climate change initiatives have resulted in a growing number of regulations and standards relating to ...

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • Monitoring methane emissions from agriculture and dairy farming

    Methane (CH4) is the second most prevalent greenhouse gas emitted from human activities. In 2014, CH4 was responsible for around 11 percent of all US greenhouse gas emissions caused by human actions. Methane is emitted by a range of natural sources such as marshlands, leakage from natural gas systems and livestock farming [1]. Domestic ...


    By Edinburgh Sensors Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you