emissions sampling News

  • NEW! E9000 Portable Emissions Analyzer

    The NEW E9000 emissions analyzer with Heated Sample Line is a complete portable system for EPA compliance level emissions monitoring and testing. The E9000 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. Features: Up to (9) Total Gas Sensors ...

  • Laser Gas Detection TDLS Technology

    Axetris uses proprietary technology-enhanced TDLS for gas detection. A 0.05 nm narrow bandwidth diode laser beam is used to scan across an absorption band of the target gas, thus performing a high-resolution near infrared absorption measurement. Laser gas detection, based on Tunable Diode Laser Spectroscopy or TDLS, provides a valid solution to many challenges in environmental gas ...


    By Axetris Ag

  • Neptech Offers Free Sample of New Line of Emission Filters

    Neptech launches new line of filter products for use in emission testing and chemical analysis.  These products have been tested and proven to exceed industry standards and are priced well-below major competitive brands. Free Test Sample Offer To demonstrate the quality and performance of these new filter elements Neptech is offering free samples to select customers for testing and ...


    By Neptech Inc.

  • TEST, Inc. - The only company in West Virginia that Specializes in Air Source Emission Sampling

    TEST, Inc. has been providing reliable, efficient, and cost-effective air source emission sampling since 1971. We are the only company that specializes in air source emission sampling and analysis. In addition to air sampling, we also provide soil and water sampling, permitting assistance, and a number of other environmental services. Formerly a subsidiary of Wastetron, Inc. (WTI), TEST, Inc. ...


    By TEST, Inc.

  • Gas Sampling Probes for Every Application

    Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...


    By JCT Analysentechnik GmbH

  • Diesel Emissions, Health and the Law

    When diesel is used as an engine fuel, it is inevitable that you will produce Products of Incomplete Combustion (PICs). Hence, we never just produce carbon dioxide (CO2) and water (H2O) alone, but rather a myriad of hydrocarbons including aromatics (e.g. benzene, toluene) aldehydes and poly-aromatic hydrocarbons (PAHs) in a semi-volatile phase or bound with carbonaceous particulate, and ...


    By Shawcity Limited

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • Site Remediation - Emissions Boundary Monitoring

    The remediation of contaminated land sites can prove to be a challenging undertaking.  There is considerable risk of chemical exposure to both the onsite workforce and to surrounding communities. To offsite receptors, the remediation process itself can become a significant route of exposure, with the excavation and uncovering of otherwise trapped contaminants resulting in potential ...


    By Shawcity Limited

  • Germany lowers biogas formaldehyde emissions

    The renewable energy sector has grown enormously in Germany in recent years and there are now large numbers of plants producing energy from biogas/anaerobic digestion. The emissions from these plants are regulated, but the measurement of formaldehyde (a carcinogen) is being reduced as a result of a financial incentive system. However, the measurement of formaldehyde is challenging and in order to ...


    By Gasmet Technologies Oy

  • Fingerprinting emissions from waste incinerators

    The use of MWIs to dispose of materials such as plastic, glass and food waste is increasing in the UK due to EU restrictions on the use of landfill. The European Industrial Emissions Directive, which aims to protect the environment and human health, imposes strict limits on emissions of heavy metals and other pollutants from MWIs. However, the impact of MWI emissions on ambient air pollution is ...

  • Emissions regulations theme for MCERTS 2011

    MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By ECO PHYSICS INC.

  • Stack Emission Monitoring for Naval application

    Emission Monitoring system for naval application ETG 7500 Monitored Gas CO2 (NDIR) 0-25% SO2 (NDUV) 0-50 ppm Automatic calculation SO2/CO2 ratio Certification in process with RINA ETG Choose DOAS UV because it has low interferences in the application gas stream, and particularly for water vapour, the NDIR has a big influence vs autozero conditions, and ...

  • 4 Continuous Emission Monitoring Systems for Egypt

    The GIZA NORTH Power Plant consists of two modules: each module configured in a 2x2x1 arrangement with two Combustion Turbine Generators (CTGs), two Heat Recovery Steam Generators (HRSGs) and one Steam Turbine Generator (STG). Each module has a rated nominal capacity of 750 MW. Scope of supply: 4 (four) CEMS/Shelters, comprising each a MIR9000 with CLD option, an MVS switching system, 2 SEC ...


    By Environnement S.A

  • Gradko Attending the Air Quality and Emissions Show 2013

    Gradko will be attending the AQE 2013 show in Telford on 13-14th March. This years show is an expansion of the usual MCERTS exhibition to include all aspects of air quality monitoring, allowing visitors to see all the latest technology at one event. We will be exhibiting our full range of diffusion tubes for monitoring of VOCs, NO2, NOx, O3, SO2, Acid ...


    By Gradko International Ltd

  • Mercury emissions monitor draws crowds in Edinburgh

    Gasmet unveiled a new continuous mercury monitoring system (CMM) at Mercury 2013 in Edinburgh, Scotland, during the ‘International Conference on Mercury as a Global Pollutant’. Expressing his delight with the number of enquiries received, Gasmet Europe’s Antti Heikkilä said: “With delegates from over 50 countries, the conference was extremely well attended and our ...


    By Gasmet Technologies Oy

  • Learn More About the Art of Emissions Monitoring

    E Instruments is proud to present our newest report on the complex art of emissions monitoring and gas sampling. Every application encompasses different system considerations and there really is no “one-size-fits-all” approach to proper emissions monitoring. The purpose of this technical note is to provide an understanding of what types of equipment are needed for a wide range of ...

  • NEW E8500 PLUS Portable Emissions Analyzer

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. NEW Features: Upgraded Software with Automatic Data-Logging NEW PID VOC Sensor Option NEW ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you