engine emissions sampling News

  • Diesel Emissions, Health and the Law

    When diesel is used as an engine fuel, it is inevitable that you will produce Products of Incomplete Combustion (PICs). Hence, we never just produce carbon dioxide (CO2) and water (H2O) alone, but rather a myriad of hydrocarbons including aromatics (e.g. benzene, toluene) aldehydes and poly-aromatic hydrocarbons (PAHs) in a semi-volatile phase or bound with carbonaceous particulate, and ...


    By Shawcity Limited

  • Curing carpet underlay emissions

    The EU Solvent Emissions Directive is helping to drive down Volatile Organic Compound (VOC) emissions in a broad range of industries and Interfloor, a UK manufacturer of carpet underlay, has found that the use of a portable gas analyser from Quantitech has helped to implement emissions reductions and to demonstrate ongoing improvements in emissions control. With leading brands such as Duralay and ...


    By Quantitech Ltd

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By ECO PHYSICS INC.

  • Germany lowers biogas formaldehyde emissions

    The renewable energy sector has grown enormously in Germany in recent years and there are now large numbers of plants producing energy from biogas/anaerobic digestion. The emissions from these plants are regulated, but the measurement of formaldehyde (a carcinogen) is being reduced as a result of a financial incentive system. However, the measurement of formaldehyde is challenging and in order to ...


    By Gasmet Technologies Oy

  • ASTM D6728 - 11 standard test method for determination of contaminants in gas turbine and diesel engine fuel by rotating disc electrode atomic emission spectrometry

    Operating experience of gas turbines and diesel engines has shown that some of the ash-forming substances present in a fuel can lead to high temperature corrosion, ash deposition, and fuel system fouling. Ash-forming materials may be in a fuel as oil-soluble metallo-organic compounds as water-soluble salts or as solid foreign ...


    By ASTM International

  • ASTM D6130 - 11 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    Some engine coolants are formulated with silicon containing additives. This test method provides a means of determining the concentration of dissolved or dispersed elements which give an indication of this additive content in the engine coolant. 1. Scope 1.1 This test method covers the determination of silicon in engine coolant by ...


    By ASTM International

  • Emissions regulations under control at all times

    All manufacturers in the automotive segment face the challenges posed by more stringent regulations for nitrogen emissions (NOx emissions) when developing their engines and NOx after treatment systems. A number of demands made on the real-time measurement of these emissions are directly connected with the regulations. The engine exhaust gas analyzer MEXA-ONE-QL-NX, which can be integrated into ...


    By HORIBA Europe GmbH

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Mobile monitoring station assesses diesel emissions

    Researchers in Greece are using a Gasmet FTIR multiparameter gas analyzer, deployed in a mobile van (MOBILAB), to undertake exhaust gas analysis for comparison with ambient air quality data. “This enables us to undertake temporal and spatial air quality measurements from within traffic, measuring emissions during different traffic conditions,” says Apostolos Tsakis, from the Aerosol ...


    By Gasmet Technologies Oy

  • Mobile monitoring station assesses diesel emissions

    Researchers in Greece are using a Gasmet FTIR multiparameter gas analyzer, deployed in a mobile van (MOBILAB), to undertake exhaust gas analysis for comparison with ambient air quality data. “This enables us to undertake temporal and spatial air quality measurements from within traffic, measuring emissions during different traffic conditions,” says Apostolos Tsakis, from the Aerosol ...


    By Gasmet Technologies Oy

  • NEW E8500 PLUS Portable Emissions Analyzer

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. NEW Features: Upgraded Software with Automatic Data-Logging NEW PID VOC Sensor Option NEW ...

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • CMC Solutions’ President featured in Chemical Engineering

    In this month’s issue of Chemical Engineering, CMC Solutions’ President Brian Swanson speaks with Chemical Engineering about Air Emissions & Monitoring Systems. “If you look at monitoring systems, there are costs associated with the initial purchase price, with maintenance and repair of ...


    By CMC Solutions, LLC

  • NEO Software will facilitate method development, samples measurements and results management.

    HORIBA Scientific, global leader in ICP-OES spectrometry systems, announced its newest software release for their ICP-OES spectrometers. NEO is designed to facilitate method development, samples measurements and results ...


    By HORIBA Europe GmbH

  • Panasonic Begins Shipping Samples of New Catalyst for Diesel Exhaust Gas Purification

    Osaka, June 22, 2010 - (ACN Newswire) - Panasonic Corporation announced today it has succeeded in the development of a new catalyst using an alkali metal compound to decompose and purify particulate matter in diesel engine exhaust gas[1], and has begun shipping its samples this month. As diesel emission regulations have become increasingly stringent, particularly in Japan, the US, and Europe, ...


    By Japan Corporate News - JCN

  • Unique Engine Analysis System Now Offered

    Environnement SA (France) now offer heated, turnkey, gas analysis systems which are very easy to use and perform fast, continuous and simultaneous measurement of NH3 and NOx in DeNOx applications. These systems are ideal for engines where SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) have been implemented. In DeNOx systems using urea injection with ammonia (NH3) ...


    By Environnement S.A

  • NEO Software will facilitate method development, samples measurements and results management

    HORIBA Scientific, global leader in ICP-OES spectrometry systems, announced its newest software release for their ICP-OES spectrometers. NEO is designed to facilitate method development, samples measurements and results management. ICP Neo delivers powerful tools for samples measurement with a new HDD mode (our unique and patented High Dynamic Range Detection System) integrated for standard ...


    By HORIBA Europe GmbH

  • 2015 International Diesel Engines Industry Research Report

    World demand to rise 6.7% annually through 2015 World diesel engine demand is projected to grow 6.7 percent per year through 2015 to $197.5 billion. This represents an acceleration from the 2005-2010 period. Product sales will be driven by a pickup in the production of motor vehicles, particularly medium and heavy trucks and buses. Value gains will also be fueled by the growing use of ...


  • Cemtrex Markets Its New Multiplexed Emissions Monitoring System

    Cemtrex, Inc.'s (OTC: CTEI) new Multiplexed Emissions monitoring systems find worldwide acceptance and approvals by multinational engineering companies as well as original equipment manufacturers around the globe. This system termed "IntelliCEM" is designed to sample multiple stacks and provide a very cost-effective solution for process and emissions reporting. Conventional systems require ...

  • New worldwide test procedures for measuring emissions from trucks and buses

    Truck and bus manufacturers will be able to develop just one family of engines for all major world markets, due to a new Global Technical Regulation (GTR), which was agreed at the United Nations Economic Commission for Europe (UN/ECE) in Geneva. The regulation will enter into force within eight months and set ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you