exhaust gas emissions News

  • New 5 Gas Exhaust Analyzer

    The IDEAL Automotive Five Gas Exhaust Analyzer F5000-5GAS includes: FIVE GAS Exhaust Analyzer High Accuracy NDIR Sensors: CO, CO2, HC Electrochemical Sensors: O2, NO/NOx Light Weight, Portable, & Durable Lambda (λ) & AFR Calculations The NEW F5000-5GAS exhaust analyzer is a complete portable tool ...

  • New Five Gas Exhaust Analyzer Released

    The NEW F5000-5GAS exhaust analyzer is a complete portable tool for automotive & forklift emissions monitoring. The F5000-5GAS is ideal for performing engine tuning & maintenance, pre-compliance verification, and vehicle diagnostics. FIVE GAS Exhaust Analyzer High Accuracy NDIR Sensors: CO, CO2, HC Electrochemical Sensors: O2, NO/NOx ...

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • Wärtsilä wins repeat order from Messina for exhaust gas cleaning systems

    /www.w3.org/1999/xhtml">Wärtsilä wins repeat order from Messina for exhaust gas cleaning systems Wärtsilä Corporation, Press release, 26 February 2013 at 12 noon EET Wärtsilä, the marine industry's leading solutions and services provider, has been contracted by the Korean yard STX Offshore & Shipbuilding, to supply ...


  • Panasonic Begins Shipping Samples of New Catalyst for Diesel Exhaust Gas Purification

    Osaka, June 22, 2010 - (ACN Newswire) - Panasonic Corporation announced today it has succeeded in the development of a new catalyst using an alkali metal compound to decompose and purify particulate matter in diesel engine exhaust gas[1], and has begun shipping its samples this month. As diesel emission regulations have become increasingly stringent, particularly in Japan, the US, and Europe, ...


    By Japan Corporate News - JCN

  • Efficient and energy optimised exhaust gas treatment for carbon fibre processes and recycling

    The use of carbon fibre and composite materials has significantly increased in the past few years and will further increase mainly to reduce the weight of air planes, cars and wind blades in order to reduce the fuel consumption and increase efficiencies. For the production of carbon fibre a reasonable amount of heat energy is required for fibre oxidation ovens and carbonisation furnaces and ...

  • Exhaust air purification - Regenerative thermal incineration (RNV)

    Prantner delivers a system for efficient exhaust air purification for biogas treatment / lean gas purification for a client to Berlin. Performance data and clear avantages Air flow from 600 to 3.000 Nm³/h Insensitive to fluctuation in concentration and volume flows Excellent controllability in case of concentration peaks No primary energy ...

  • Efficient exhaust air purification for drying and painting processes

    Dürr Environmental and Energy Systems optimizes exhaust air purification for the automotive industry and perfectly coordinates it with the latest drying and painting processes. Painting and drying of car bodies produce gaseous pollutants that have to be removed from the air depending on the paint system and statutory requirements. Recuperative incinerators, e.g. the Ecopure TAR from ...

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • Michaelis RTO Systems - Michaelis made a new definition of exhaust gas cleaning for mechanical and biological waste treatment plants!

    Michaelis has built the two most actual RTO plants. We have solved the following problems: Plugging of RTO by Si products Energy consumption too high Corrosion The benefits compared to the other plants are remarkable: High reliability without big maintenance efforts Energy consumption by more than ...


    By Michaelis GmbH & Co. KG

  • Sensors, Inc. introduces high speed, dual channel exhaust flow meter

    Sensors, Inc. introduces the latest in Exhaust Flow Meter technology, the SEMTECH EFM-HS. The new flow meter, which further expands Sensors’ SEMTECH product line, offers major advances in flow measurement technology. With a sampling rate of up to 2500 Hz and four, dual stage differential pressure transducers, the EFM-HS accurately measures every forward and reverse flow pulsation from idle to ...


    By Sensors, Inc.

  • ASTM D7422 - 11 standard test method for evaluation of diesel engine oils in T-12 exhaust gas recirculation diesel engine

    This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR and running on ultra-low sulfur diesel fuel. Obtain results from used oil analysis and component measurements before and after test. The test method may be used for engine oil specification acceptance when all details of ...


    By ASTM International

  • Cleaning up ships’ emissions

    The cargo vessels that carry 80% of the world’s trade and the cruise ships that take thousands of passengers to pristine tourist attractions use the world’s dirtiest fuel. With 60% of the world’s ports already voluntarily excluding the worst-polluting ships, owners are in a desperate hunt to find ways to clean up their act – and a giant steel sponge could be the answer. ...


    By Climate News Network

  • ASTM D6987 / D6987M - 11 standard test method for evaluation of diesel engine oils in t-10 exhaust gas recirculation diesel engine

    This test method was developed to evaluate the wear performance of engine oils in turbocharged and intercooled four-cycle diesel engines equipped with EGR. Obtain results from used oil analysis and component measurements before and after the test. The test method may be used for engine oil specification acceptance when all details of the procedure are followed. ...


    By ASTM International

  • Diesel Emissions, Health and the Law

    When diesel is used as an engine fuel, it is inevitable that you will produce Products of Incomplete Combustion (PICs). Hence, we never just produce carbon dioxide (CO2) and water (H2O) alone, but rather a myriad of hydrocarbons including aromatics (e.g. benzene, toluene) aldehydes and poly-aromatic hydrocarbons (PAHs) in a semi-volatile phase or bound with carbonaceous particulate, and ...


    By Shawcity Limited

  • Reaching Euro VI emissions limits

    The requirements of low and lowest detectable exhaust analysis has prompted Eco Physics to launch a broad range of analyzers for NO/NOx detection. Emissions tuning is one of the targets of the EURO VI regulations as well as US EPA 2010, which are: Reduction of Particulate Matter (PM) and reduction of Nitrogen Oxides (NOx). In the past 15 years – since the first European regulation for exhaust ...


    By ECO PHYSICS INC.

  • Explore Our 2017 Exhaust Analyzer Product Line by Checking Out Our New Online Catalog

    With the first quarter of 2017 coming to an end and a new one beginning, you can guarantee that we will soon be unveiling some great new emissions and combustion analyzers, air quality monitors, portable gas detectors, and many other products. If you’d like to know what we have created so far, and ...

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • Germany lowers biogas formaldehyde emissions

    The renewable energy sector has grown enormously in Germany in recent years and there are now large numbers of plants producing energy from biogas/anaerobic digestion. The emissions from these plants are regulated, but the measurement of formaldehyde (a carcinogen) is being reduced as a result of a financial incentive system. However, the measurement of formaldehyde is challenging and in order to ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you