explosion proof News

Explosion proof and intrinsic safety 101

Portions of the standard Spill Buster system operate in various “classified” flammable or explosive vapor zones or areas as defined in the US under the NEC codes. The location of the equipment on the site must be designed properly; or the equipment must be enclosed in appropriate enclosures, to prevent ignition of these vapors should the failure of a component occur. Since this is ...

Nov. 18, 2013

By Clean Earth Technology, Inc.
Triple Receptacle Explosion Proof Extension Cord

Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a heavy duty extension cord designed to provide secure connection of explosion proof equipment in hazardous locations. The EPEXC-150-3X20A-10.3 ...

Oct. 20, 2015

By Larson Electronics LLC
Explosion Proof Refrigerators and Freezers from Kirsch

There are many “spark free” refrigerators and fridges on the market, but something that is truly “explosion proof” is difficult to find. Camlab have teamed up with Kirsch Medical Gmbh to offer a new range of both fridges and freezers that are just that; Explosion Proof. LABEX®- Refrigerators Interiors are free of any ignition ...

Sep. 8, 2015

By Camlab Limited
An explosion proof Noise Dosemeter updated for 2007

Cirrus Research plc announces the introduction of the new version of the CR:110AIS doseBadge Personal Noise Dosemeter, which has ATEX, EEx, IECEx, MSHA and SABS Intrinsic Safety Approval for use in Hazardous zones. The new version of the CR:110AIS has been updated to add a range of new measurement functions, has new software along with a new charging station. Ideal for complying with both ...

May 9, 2007

By Cirrus Research plc
Explosion Proof Tool Tap Reel with Single Receptacle

Larson Electronics continues its commitment to providing high grade lighting equipment to specialty markets with the release of an explosion proof tool tap reel with a single twist lock receptacle. The EPLRT-50-12.3-GCR explosion proof tool tap from ...

Nov. 16, 2015

By Larson Electronics LLC
Integrated LED Explosion Proof Light Fixture

With over 40 years as a leader in the industrial and commercial lighting industry, Larson Electronics announces the release of a new Class 1 Division 1 integrated LED light fixture for areas where flammable chemical and petrochemical vapors exist or have the potential to exist. The ...

Nov. 3, 2015

By Larson Electronics LLC
Larson Electronics Releases Explosion Proof LED Light with 250’ Cord and Explosion Proof Plug

Longtime leader in commercial and industrial grade lighting equipment Larson Electronics continues its commitment to providing high grade lighting equipment to specialty markets with the release of a 150 watt high bay LED light equipped with 250’ cord and an explosion proof plug. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 ...

Aug. 26, 2015

By Larson Electronics LLC
Larson Electronics Releases 150 Watt Explosion Proof LED Light with 100’ Cord and Explosion Proof Plug

Longtime leader in commercial and industrial grade lighting equipment Larson Electronics continues its commitment to providing high grade lighting equipment to specialty markets with the release of a 150 watt high bay LED light equipped with 100’ cord and an explosion proof plug. This Class 1 Division 1 & 2, Class 2 Division 1 & 2 ...

Jul. 13, 2015

By Larson Electronics LLC
150 Watt Portable Explosion Proof LED Light on Base Stand

Leading supplier of explosion proof and industrial grade lighting Larson Electronics has announced the release of a Class 1 & 2 Division 1 & 2 portable explosion proof LED light mounted on a base stand fabricated from non-sparking aluminum. The ...

Aug. 11, 2015

By Larson Electronics LLC
High Performance Explosion Proof LED Drop Light Released by Larson Electronics

Larson Electronics has announced the release of a new explosion proof LED drop light designed to provide cooler operation and higher performance than standard incandescent drop lights. The EHL-LED-7W-150-EPP LED drop light is approved for Class 1 Division 1 & 2 locations, produces brighter and whiter output than a 100 watt incandescent light, and runs cool to the touch. The EHL-LED-7W-150-EPP ...

Jul. 20, 2015

By Larson Electronics LLC
Five Outlet Explosion Proof Extension Cord Released by Larson Electronics

Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a heavy duty extension cord designed to provide secure connection of explosion proof equipment in hazardous locations. The ...

Apr. 2, 2015

By Larson Electronics LLC
150’ Triple Outlet Explosion Proof Extension Cord Released by Larson Electronics

Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a heavy duty extension cord equipped with three twist lock receptacles designed to provide secure connection of explosion proof equipment in hazardous locations. The ...

Apr. 24, 2015

By Larson Electronics LLC
Magnalight.com Announces Addition of Explosion Proof LED Fixture with Non-Metallic Housing

Magnalight.com announced today the addition of an explosion proof LED light with non-metallic housing for applications where high resistance to corrosive environments is needed. The HAL-CRNM-LED7W explosion proof LED light fixture features the combination of a high output LED lamp with a non-metallic housing to provide more light than 100 ...

Jan. 8, 2012

By Larson Electronics LLC
Larson Electronics announces addition of an Explosion Proof LED Strobe Light

In response to an ongoing demand for explosion proof LED strobes and beacons, Larson Electronics has announced the addition of the EPSLED-80-141. CSA listed, weather proof, and Nema 4X compliant for marine use, this LED strobe light is available in pendant, ceiling, or wall mount versions with several color options available. The ...

Apr. 2, 2015

By Larson Electronics LLC
Explosion Proof LED Light with Adjustable Magnetic Base Released by Larson Electronics

With over 40 years as a leader in the industrial and commercial lighting industry, Larson Electronics announced the release of a 70 watt explosion proof LED light with an adjustable magnetic base allowing users to install this light on any unsymmetrical ferrous surfaces. The ...

Dec. 7, 2015

By Larson Electronics LLC
Explosion Proof Tool Tap Reel with Single Receptacle released by Larson Electronics

Larson Electronics continues its commitment to providing high grade lighting equipment to specialty markets with the release of an explosion proof tool tap reel with a single explosion proof receptacle. The EPLRT-50-12.3-HR explosion proof cord reel from ...

Jun. 30, 2015

By Larson Electronics LLC
1500 Watt Explosion Proof LED String Light Released by Larson Electronics

Larson Electronics has added to its extensive range of industrial grade lighting equipment with the release of a 1500 watt explosion proof LED string light set. Featuring ten 150 watt LED lights, each light is equipped with I-beam clamps for temporary mounting. This Class 1 Division 1 & 2, Class 2 Division 1 ...

Apr. 9, 2015

By Larson Electronics LLC
25’ Explosion Proof Extension Cord with Four Receptacles Released by Larson Electronics

Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a heavy duty extension cord designed to provide secure connection of explosion proof equipment in hazardous locations. The ...

Apr. 2, 2015

By Larson Electronics LLC
Triple Receptacle Explosion Proof Extension Cord Released by Larson Electronics

Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a heavy duty extension cord designed to provide secure connection of explosion proof equipment in hazardous locations. The EPECX-3X-100 explosion ...

Apr. 2, 2015

By Larson Electronics LLC
Larson Electronics announces the addition of a Stanchion Mounted Explosion Proof LED Light

In response to an ongoing demand for versatile mounting options, Larson Electronics has announced the addition of their new EPL-LED7W-STCHN stanchion mounted explosion proof LED light. The EPL-LED7W-STCHN hazardous area LED light fixture from ...

Nov. 11, 2015

By Larson Electronics LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you

First name

Last name

Email

Company name

Website

Company description

Minimum 250 characters

Business type

Industry

Location

Market focus