fid-based gas analyser News

  • New partnership for TOC gas analysers

    Quantitech, the Milton Keynes based instrumentation specialist, has been appointed exclusive distributor in the UK and Ireland for ErsaTec GmbH, a leading German manufacturer of gas analysers for the measurement of organic gases such as solvents and fuels. Designed and developed by former employees of Bernath Atomic (manufacturer of the well-known Bernath 3006 FID), the ErsaTec analysers employ ...


    By Quantitech Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • Hiden Analytical Expand Gas Analysers

    The Hiden HPR Series of mass spectrometer-based gas analysers is further expanded to include analysis of static off-line gas samples in addition to the more routine conditions of dynamic flow. New additions include the HPR-70 benchtop system for gas composition measurement of individual discreet samples as small as 0.1 sccm, the gas preparation stage including selectable cascade volumes for ...


    By Hiden Analytical

  • Ultraportable and ultra-here: the LGR Greenhouse Gas Analyser

    High performance portable analysers aimed at anyone wanting to measure CO2 and methane in the field are proving popular with existing and new customers at Enviro Technology Services. The ground-breaking ultraportable greenhouse gas analyser from Los Gatos Research (LGR) measures methane, carbon dioxide and water vapour simultaneously in a package that is compact and crushproof. But ...

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • FTIR Gas Analyser Supports Carbon Capture Research

    Quantitech has commissioned an advanced Gasmet FTIR multiparameter gas analyser at the UK Carbon Capture & Storage Research Centre (UKCCSRC) facility near Sheffield. This Pilot-scale Advanced Capture Technology (PACT) facility was created to catalyse and support both industrial and academic research. PACT Business Development Manager Dr Kris Milkowski, from the University of Leeds, says: ...


    By Quantitech Ltd

  • Geotech launches new portable landfill gas analyser

    The new Geotech GA5000 portable landfill gas analyser arrives in Jan 2012 with a colour-screen and a 3-year warranty. Up-to-the-minute as a new-generation analyser, the ...


    By Geotech

  • Gas analyser checks printers for compliance and safety

    A leading digital print technology company, Tonejet, recently purchased a portable VOC monitor from Ashtead Technology as part of an ongoing programme to ensure the protection of staff, and to assist in conformity with the ATEX Directive as part of the Machinery Directive 2006/42/EEC on CE-Marking. Technological developments in the print and coatings sectors have delivered a wide variety of ...


    By Ashtead Technology Ltd

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • Revolutionary FTIR gas analyser now available to rent from Quantitech

    The Gasmet DX-4030, the first truly portable FTIR gas analyser in the world, is now available to hire from specialist environmental instrumentation company Quantitech. The DX-4030 is a revolutionary new analyser based on tried and tested Gasmet technology providing both field-usability and high levels of analytical performance. The DX-4030 employs FTIR (Fourier Transform InfraRed Spectroscopy) ...


    By Quantitech Ltd

  • UKAS Quality Award, a UK first - for Geotech in Gas Analyser Calibration

    Geotech has achieved UKAS accreditation for its calibration lab for its full range of landfill, biogas and waste to energy gas analysers. According to its UKAS assessor, “Geotech is the first manufacturer of portable gas analysers to obtain UKAS accreditation.” For Geotech gas analysers, already with MCERTS certification for the instrument, this important UKAS accreditation gives Geotech analyser ...


    By Geotech

  • New super sensitive NDIR CO2 gas analyser for carbon capture and storage

    The result of extensive new development work part funded by the UK Technology Strategy Board (TSB), Signal launch the new Pulsar class GFC NDIR gas analyser. The objective of this work was to develop a CO2 gas analyser for the accurate measurement of carbon capture and storage projects. The project was undertaken with cooperation between Signal Group, National Physical Laboratory and ...


    By Signal Group Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • Geotech launches new portable biogas analyser

    The new Geotech Biogas 5000 portable biogas analyser arrives in Jan 2012 with a colour-screen and a 3-year warranty. Up-to-the-minute as a new-generation biogas analyser for anaerobic digesters (AD), the ...


    By Geotech

  • Ecotech offers spare parts for ML9800 and EC9800 Analysers

    Ecotech is pleased to confirm the availability of spare parts and consumables for all earlier model Monitor Labs ML9800 and all current model EC/ME9800 Analysers are available through Ecotech’s world wide network of distributors or Ecotech directly. In addition Ecotech also offer a new microprocessor to replace the old microprocessor used by Monitor Labs in the ML9800 analysers. This new ...


    By Ecotech Pty Ltd

  • New! N2O analysers for patient & occupational H&S

    Accuracy is essential for occupational N2O exposure checks and piped medical gas verification. The new Geotech G200 range of N2O analysers measure N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use. With options for CO2, O2 and CO, the G200 range can assist anaesthetists and consultants in operating theatres, midwifery, dental surgeries, X-ray departments, hospital waiting ...


    By Geotech

  • P S Analytical Online Mercury in Natural Gas Analyser Achieves ATEX Certification

    As part of its ongoing product development P S Analytical has recently received the ATEX EC-Type certification permitting our online mercury measurement system for natural gas to be installed in Category 2 IIC T4 designated areas. The procedure used for the measurement of mercury by atomic fluorescence basically follow the ASTM 6350-98 and ISO 6978-2 procedure and the PSA 10.670 is specifically ...


    By P S Analytical Limited

  • One-touch analysis to guarantee high quality standards for welding gases with the AGC Veri-GAS analyser range

    These handheld gas analysers employ industry-leading components at their core combined with AGC’s cutting-edge engineering solutions and are specially designed for a range of sampling applications. With armored tubing and specialised filtration and flow-limiting devices utilised, these analysers perform straightforward, fast and accurate readings at the touch of a button. The ...


    By AGC Instruments Ltd.

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you