fid method News

  • Polaris FID and TÜV Certification

    We are glad to inform You that we received the Product Conformity Certificate (ID No. 0000039773) from TÜV Rheinland. The Polaris FID was tested by TÜV Rheinland Energie und Umwelt GmbH in accordance with the MCERTS Performance Standard for Portable Emission Monitoring Systems and certified in accordance ...


    By Pollution Srl

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • New Rack Mount Heated FID for stack testers and systems integrators

    This new Model 3-500  heated FID hydrocarbon analyzer fully complies  with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with EPA Methods 25A and 305 for the USA. As an attractive low cost alternative to the quite expensive FID analyzers of today's choices for stack emission testing and process  applications, a new, compact heated FID ...


    By J.U.M. Engineering GmbH

  • New Oil in Water Method Allows Onsite Analysis

    S. Norwalk, CT, April 19, 2007 -- New European regulations governing the measurement of oil-in-water, a 15% hydrocarbon emission reduction target and Hydrocarbon Trading have all heightened the importance of monitoring oil concentration levels. As a result, US instrument manufacturer, Wilks Enterprise, Inc., and their UK representative – Quantitech, Ltd. - have reported a rapid growth in demand ...


    By Spectro Scientific

  • New deal on VOC emissions analysers

    The German manufacturer of gas analysers SK Elektronik (SKE), has appointed Quantitech as its exclusive UK distributor. SKE is a leading global provider of gas analysers based on the principle of Flame Ionisation Detection (FID). Key applications for the company’s analysers include emissions monitoring, process gas monitoring, and the monitoring of abatement efficiency and emissions from ...


    By Quantitech Ltd

  • FTIR for CEM’s and VOC’s monitoring

    As major contributors to environmental emissions, the waste incineration and power generation industries require both continuous and periodic emissions monitoring to ensure each plant is within Emission Limit Values (ELVs). FTIR provide to perform emissions monitoring solutions for the range of standard incineration or “combustion” gases, both inorganic species such as CO, NOx, SO2, ...


    By ETG Risorse e Tecnologia

  • ASTM E594 - 96(2011) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

    Although it is possible to observe and measure each of the several characteristics of a detector under different and unique conditions, it is the intent of this recommended practice that a complete set of detector specifications should be obtained at the same operating conditions, including geometry, flow rates, and temperatures. It should be noted that to specify a detector's ...


    By ASTM International

  • New landfill gas detector from Photovac

    Photovac, Inc., the manufacturer of premium instruments for volatile organic compound analysis in air, soil, and groundwater, is pleased to introduce the MicroFID flame ionization detector for landfill gas detection.The measurement of methane and non-methane components in landfill gas is essential for compliance with air quality operating permit requirements, and the MicroFID detector from ...


  • Hydraulic Fracturing Fluids

    A new ASTM International subcommittee will develop standards that will be used by contract laboratories, water utilities and others requiring or developing methods used for hydraulic fracturing. Subcommittee D19.09 on Water – Hydraulic Fracturing Fluids is under the jurisdiction of ASTM International Committee D19 on Water. Standards developed by D19.09 ...


    By ASTM International

  • A Simple Test for Gases in Water

    A proposed new ASTM International standard will provide a simplified way to test for dissolved gases, such as methane and ethane, in water. Environmental and testing laboratories will be able to use the proposed standard to ensure that drinking water is safe in areas in which hydraulic fracturing occurs. Laboratories would use the proposed test — ...


    By ASTM International

  • Comparison Data on Wilks Biofuels Blend Analyzers Conducted by Independent Laboratories

    Wilks Enterprise is pleased to announce the availability of comparison data, done by independent laboratories, on its InfraCal Ethanol and Biodiesel Blend Analyzers and InfraSpec VFA-IR Spectrometer. The InfraCal Ethanol Blend Analyzer was tested against an Oxygenate Flame Ionization Detector (O-FID) with comparable results.   The InfraCal Biodiesel (FAME) Blend Analyzer and InfraSpec VFA-IR ...


    By Spectro Scientific

  • Trimble Introduces the SiteFID Gas Monitoring Solution for the Environmental Services Market

    Trimble (NASDAQ:TRMB) introduced today the SiteFID™ Gas Monitoring solution for the environmental services market. The solution, specifically designed for environmental consultants and landfill operations managers, integrates positioning and mobile computing capabilities coupled with Flame Ionization Detection (FID) gas sensor technology, helping mobile workers to streamline their workflow ...


    By Trimble

  • CAI Introduces New Landfill Gas Systems

    ORANGE, CA - The California Analytical Instruments Landfill Gas Analysis System provides a highly accurate Methane and Oxygen analyzer housed in a NEMA 4 or 4X enclosure.  The enclosure is climate controlled for outdoor mounting and provides maximum stability in virtually any environment. The enclosure includes fittings for calibration gases, sample gas, and exhaust as well as solenoid ...

  • MCERTS Certification for ambient air analysis on benzene and VOCs

    Chromatotec® is proud to announce that the FID ins­trument airmoVOC (measurement of benzene but also 12 compounds of the European list between C6 and C12) and the PID instrument airToxic (measurement of Benzene but also BTEX compounds) have obtained MCERTS certification since June 2013. These two MCERTS certifi­cates have been delivered by SIRA Certification Service on behalf of the ...


    By Chromatotec Group

  • Thermo Fisher Scientific introduces their new Multi-Gas analyzer for continuous gas monitoring

    Thermo Fisher Scientific Inc., the world leader in serving science, has announced the Thermo Scientific Model 70 FTIR Multi-Gas CEMS, a single analyzer, continuous monitoring system capable of measuring up to ten gases or more for almost any incineration or co-incineration application. The new Thermo Scientific real-time monitoring system employs the most widely used, field-proven, process FTIR ...

  • Triad expedites brownfields redevelopment in Fairbanks

    The Fairbanks North Star Borough (FNSB) used Triad in 2006-2007 to assess environmental conditions at a municipal property along the Chena River in Fairbanks, AK. FNSB accelerated the site investigation as part of a brownfields assessment grant received from the U.S. EPA in 2005. Low-level contamination had been identified onsite in past investigations, but its extent and impact on future ...

  • Gas analyzers accelerate business growth

    Transportable multi-parameter analytical instruments have been key to the growth of an analytical services company based in Elk City, Oklahoma. Great Plains Analytical Services (GAS) operates a fleet of mobile monitoring systems, providing onsite gas analysis for customers across the USA, and Gasmet FTIR analyzers have enabled the company to offer a comprehensive onsite monitoring service. ...


    By Gasmet Technologies Oy

  • Sierra expands Online Industrial Flow Meter Store

    With the addition of the InnovaMass® 241 insertion multivariable mass vortex flow meter to their online store, Sierra Instruments, a global leader in mass flow instrumentation, offers the largest selection of in stock factory select heavy and light industrial mass flow meters available ...


    By Sierra Instruments, Inc.

  • a1-cbiss Introduce Complete Ambient Air Analyser Range

    In partnership with Environnement SA, a1-cbiss are pleased to announce the addition of new ambient air quality monitoring analysers to their extensive emission monitoring analysers range. The complete range of real-time gas analysers each use unique technologies and reference methods to provide the most reliable and accurate results for the common regulatory air pollutants such as nitrogen ...


    By a1-cbiss

  • Sensors, Inc. Announces New Product Line, the SEMTECH ECOSTAR

    Sensors, Inc., the leading manufacturer of in-use emissions test equipment, announces the launch of an all-new, full suite of modular gaseous and particulate measurement devices that meet world-wide laboratory-grade requirements. SEMTECH ECOSTAR Building on over forty years of experience in gas and exhaust flow measurement and as the world's pre-eminent PEMS equipment ...


    By Sensors, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you