filter monitor News

  • Availability, price of silica sand challenges water well contractors in the Southwest

    A wide range of quality exists from available sand sources used for water well filter packs in the United States. In the Southwest, there is a noticeable difference from the top-quality sand to the next one down. The reliability of quality silica sand has been in decline in recent years in the Southwest, according to Marvin Glotfelty, RG, principal hydrogeologist for Clear Creek Associates LLC in ...

  • NEW Zero Filter Attachment for IAQ Monitors

    E Instruments proudly presents our brand new Zero Filter Attachment. This filter attachment allows for a much more accurate zeroing of our VOC, and toxic gas sensors. The filter removes all of the VOC’s and other toxic gases (Except CO2) from the ambient air and allows the instrument to properly measure the zero point for the gas sensors. Once the filter is removed, the instrument will read ...

  • Air Monitors lowers the cost of monitoring

    In response to public sector cutbacks, instrumentation company Air Monitors has announced that it will lower the cost of ambient air monitoring consumables until the end of 2012. Managing Director Jim Mills says “Our customers in the ambient monitoring market are going through a tough time, so we believe it is our responsibility to help them out; we already sell filters and other ...


    By Air Monitors Ltd.

  • Filter testing: Automatic particle counters and fluid contamination monitors

    Automatic Particle Counters and Fluid Contamination Monitors are widely used in filter testing and fluid contamination analysis laboratories and in industrial facilities to monitor filters and cleaning processes and machines. However, their roles and ways they are used need to be properly understood. Christophe Peuchot, Gerard J. Lynch and Nicolas Petillon of IFTS ...

  • Gold Series® Cartridge Dust Collector Offered With Integrated HEPA Safety Monitoring Filter

    Camfil Farr Air Pollution Control (APC) now offers its Gold Series® cartridge dust collector with an optional integrated HEPA safety monitoring filter. Mounted on top of the collector so that no additional floor space is required, this after-filter prevents collected dust from re-entering the workspace if there should be a leak in the dust collector's primary filtering system. It is a ...


  • The Micro Monitoring Station: MMS

    Untitled Document The MMS addresses one of the biggest problems with Air Quality monitoring: finding space for a shelter. Traditional ...


    By Environnement S.A

  • Streamlining Landfill Environmental Monitoring

    The Eurofins Field Services Groundwater team conducts compliance monitoring on behalf of various Victorian Landfill operators. New analytical results from the Eurofins lab and secondary labs were combined into spreadsheets containing ongoing and historical data on behalf of the landfill operators. This was a time consuming, labour intensive process. Uncontrolled, 'hand-me-down' spreadsheets can ...

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • Fine screens to replace sand filters

    The Huber RoDisc® Micro Screen has been designed for fine screening and polishing of many effluents, and can be used for ensuring compliance with meeting discharge consent standards or allowing water to be reused within the plant. The screen comprises a series of discs fitted with woven mesh down to 10 micron apertures which are slowly rotated on a central shaft all supported from bearings ...


    By Huber SE

  • Filter weighing assures technical cleanliness

    Residual particulate contamination from manufacturing processes can seriously impact the quality and reliability of automotive fluid circuit components. ISO 16232 specifies the requirements and methods required in order to achieve technical cleanliness. Our filter weighing solutions ensure that companies can comfortably comply with this ISO norm. Contamination with particulate matter can ...


    By Mettler - Toledo Int. Inc

  • Air Monitors MD speaks out on national network particulate monitor performance

    Many of the adverse health effects from air pollution can be attributed to fine particulates, so the accuracy and reliability of the UK’s ambient particulate monitoring network is extremely important. Since the early 1990s, this network has relied on TEOM and more recently the TEOM-FDMS direct mass measurement technology, but Air Monitors MD Jim Mills is concerned that the reputation of ...


    By Air Monitors Ltd.

  • CLD 89 for remote research monitoring of NO

    The CLD 89 fulfills the requirements of many research groups specializing in detecting and monitoring the smallest variations of NO2 concentrations in less than thirty seconds. The lagtime of less than a second makes it even more attractive. NO2 measurement is accomplished by a sequential detection of NO and NOX. The pre-chamber minimizes zero drift and cross sensitivity. This makes it ideally ...


    By ECO PHYSICS INC.

  • Oxygen Monitoring System for MRI Rooms

    Delta, British Columbia, Canada – Critical Environment Technologies Canada Inc. (CETCI) is pleased to tell you about the DCC-MRI Oxygen Monitoring System for MRI room applications in hospitals and clinics. The DCC-MRI replaces our GEM-MRI, offering technological and functional improvements over its predecessor.  Due to the strong magnetic field ...

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • Unique dust monitors for any application

    The Latest TSI Sidepak Personal Aerosol Monitors Have Been Added To The Ashtead Technology Range Of Particulate Matter (PM) Monitors. “We Were So Impressed With The Unique Features Of These Instruments, That We Immediately Added Them To Both Our Rental And Sales Portfolios,” Says Ashtead’s Regional Sales Manager Josh Thomas. “Many Occupational Exposure Applications Are ...


    By Ashtead Technology Ltd

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • Workshop focuses on dust protection and monitoring

    Ashtead Technology, TSI and the Health & Safety Laboratory (HSL) recently collaborated to deliver a workshop focusing on the environmental and safety hazards presented by dust and other particulate matter. Alan Hasson and Josh Thomas from Ashtead Technology provided an overview of the justification for dust monitoring in the workplace, and Nicholas Baxter from HSL described the requirements ...


    By Ashtead Technology Ltd

  • Manage your Bag Filter more Efficiently

    PCME Ltd, leading specialist in the development, manufacture and supply of continuous particulate emission monitors for industrial processes worldwide has increased its range of Filter Leak Monitors with the introduction of the LEAK LOCATE 320 PLUS multi-compartment Bag Filter Leak Detection System. ...


    By PCME Ltd

  • Real time monitoring using particulate samplers

    Ecotech is pleased to announce the release of a real time particulate module for use with its range of particulate samplers.High Volume Air Samplers are designed to sample ambient air through a pre-weighed filter for 24 hours after which the filter is weighed and PM concentration calculated. While there are approved methods for semi-real time monitoring such as the Tapered Element Oscillating ...


    By Ecotech Pty Ltd

  • New particulate monitor included on Australian Standards

    Ecotech Pty. Ltd. and MetOne Instruments Incorporated are pleased to announce that the BAM-1020 has been approved under Australian Standard AS/NZS 3580.9.11.2008 for the determination of particulate matter, PM10, using Beta attenuation.The BAM-1020 is the currently the only instrument available on the market that has both Australian certification for PM10 and U.S. EPA certification for PM10 and ...


    By Ecotech Pty Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you