fine granulator News

  • Neue Herbold Pulverizers for plastic granules / fine grinding plants

    Neue Herbold ZM series pulverizers (pulverisers) are designed for the pulverizing of mid-hard, brittle to high impact plastics that require the final material to be in powder form. Typical applications are PE, PVC, PC and other various types of plastics. The required pulverizer (pulverisers) input material must be in a granulate form with a maximum size of 6-8 mm (1/4-5/16 in.). For further ...

  • Increasing efficiency with TRIA granulators and eFACTOR3

    eFACTOR3, headquartered in Charlotte North Carolina, is a complete solutions provider of recycling and waste-to-energy equipment. e3 offers a wide range of machines for the recycling industry including shredding, cleaning, granulating and extruding equipment. e3 Adaptive Blades- Built to Last After our feature on the new e3 Adaptive Blade System in June, ...


    By eFACTOR3 LLC

  • New cable stripper and granulation plant launched

    A cable stripper able to handle wire as fine as 1mm together with a low cost cable granulation system are the latest additions to the JMC range of metal recycling equipment. With these two new products, JMC Recycling Systems of Nottingham, England, claims to provide small and large processors alike with the ability to take advantage of today’s high copper prices. Known as the 1000 Euro Strip, ...


    By JMC Recycling Systems Ltd

  • Reliable conveying of abrasive granulates with Mettler-Toledo Garvens

    Manufacturers of fine granulates, crystals and powders no longer have to be plagued by the ingress of particles into production line machinery with the launch of Mettler-Toledo Garvens’ Granulate Conveyor for checkweighers. Developed to reduce downtime and maintenance costs inherent with cleaning particle contamination, the new Granulate Conveyor features a unique covered design to protect ...


    By Mettler - Toledo Int. Inc

  • Plastics firm fined after worker loses fingers

    A plastics recycling firm has been fined GBP£15,000 after a worker had parts of two fingers cut off by a high-speed fan. The employee, who does not wish to be named, was injured as he repaired a drying unit at Roydon Granulation’s recycling facility in St Helens, Rochdale. He suffered serious injuries to four fingers on his left hand including the partial amputation of two while he ...

  • Eriez Demonstrates Nonferrous Fines Separation at RWM

    Eriez Magnetics Europe Ltd will be present at RWM 2014 held between16th and 18th of September at the NEC, Birmingham, UK and demonstrate new developments with its range of eddy current separators (ECS) RevX-E. This advanced equipment will enable waste processors to achieve an extremely high level separation of nonferrous material from waste material fines. Eriez’ eddy current separator ...


    By Eriez Magnetics Europe Ltd

  • New granulation and separation plant for cable recycling delivered to Italy

    For many years Europe was the main market for Eldan Recycling. Today the company has its recycling machines installed in more than 60 countries all over the world. Still, Europe is an important market and Eldan Recycling deliver to several new customers as well as returning customers each year. One interesting project is the delivery and installation of a new complete granulation and separation ...


    By Eldan Recycling A/S

  • TOMRA Sorting presents fines copper sorting at Ecomondo 2012

    Sensor-based sorting equipment provider TOMRA Sorting has unveiled an innovative solution for copper wire and cable recyclers. The new TITECH combisense [chute] was launched at Ecomondo, the international trade fair of material and energy recovery and sustainable development, held at Rimini Fiera, Rimini, Italy, from 7 to 10 November. Copper granulate, recovered by the recycling process of copper ...


    By TOMRA Sorting (TITECH)

  • Stedman`s Grand Slam™ Model 3030H Impactor Reduces Plastic Molded Parts

    Aurora, IN - The Grand Slam™ Model 3030H from Stedman efficiently reduces large pieces of rejected plastic molded parts to an ideal feed size for the granulator. After the granulator, material is then ready to be recycled and re-melted. Originally the large pieces of plastics were sized for the granulator by a band saw. The Model 3030H handles feed sizes up to 25” x 18” x 9” and features an ...


    By Stedman

  • New machine processes steel wire from tyre recycling

    Tyre wire cleaner made by MeWa separates steel and rubber. Around 3.5 million old tyres are returned for recycling every year in the European Union. A large proportion of these tyres are used to make rubber granulates. However, tyres also contain a substantial amount of steel wire. For this content, MeWa Recycling Maschinen und Anlagenbau GmbH from Gechingen has now developed the UNI-CUT® SP tyre ...


    By ANDRITZ MeWa GmbH

  • Largest LDPE /HDPE bottle processing facility installed in France

    Holzmag AG Recycling Technology, based in Dornach outside Basel, announced the start-up in April 2007 of a recycling facility for LDPE /HDPE bottles to be operated by the French firm Desjoyaux in St. Etienne. Desjoyaux, one of the world’s largest swimming pool manufacturers, produces prefabricated pool elements and uses granulate pellets to strengthen and support pools. The challenge was to ...


  • ASTM C989 / C989M - 11 Standard Specification for Slag Cement for Use in Concrete and Mortars

    This specification covers three strength grades of finely ground granulated blast-furnace slag (Grades 80, 100, and 120) for use as a cementitious material in concrete and mortars. The slag shall contain no additions and shall conform to the sulfide sulfur and sulfate chemical composition requirement. Physical properties of the slag shall be in accordance with the requirements for ...


    By ASTM International

  • MeWa introduces new special shredder for cable waste

    Accordingly cable waste promises high output quality, this recycled content is a sought-after commodity. MeWa Recycling Maschinen und Anlagenbau GmbH in Gechingen, Germany, introduces for the first time with the CableCutter CC 1200 a machine that is completely geared towards breaking down cable waste. Especially the plant efficiency of the treatment process can be decisively increased by this new ...


    By ANDRITZ MeWa GmbH

  • Granutech-Saturn Systems launches Next Generation Refiner Mill for crumb rubber

    Granutech-Saturn Systems launches Next Generation Refiner Mill for crumb rubber delivering increased production, finer powder and first-to-market ‘grease-free’ sealed roller bearing design. Granutech-Saturn Systems, a world-leading manufacturer of the Saturn brand of industrial and mobile shredders, launched a revolutionary new design refiner mill for scrap rubber, featuring sealed ...


    By Granutech-Saturn Systems

  • RUBBLE MASTER screen technology – putting quality first

    The best price is paid for material with a defined grain size at the end of the value adding chain of processes. Processing recycling materials with RUBBLE MASTER screens gives you a decisive competitive advantage in the otherwise low-profit margin construction industry. HIGHER VALUE THROUGH SORTED CRUSHED MATERIALHigh efficiency and best possible results are guaranteed by the optimised ...


    By RUBBLE MASTER HMH GmbH

  • Pin Mill Controls Particle Sizes, Cleans Rapidly

    A new 24-inch (610 mm) diameter Pin Mill model CIM-24-MS from Munson Machinery grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh). Also known as a Centrifugal Impact Mill, it is equipped with a stationary outer disc and a rotating inner disc, both ...

  • Friction-washer FW series used to wash plastic materials

    ?Applications? The NEUE HERBOLD friction washer FW Series is used to intensively wash plastic materials such as film flakes, granulate to include PET bottle flake and other types of rigid plastics. ...

  • ASTM D228 / D228M - 09e1 standard test methods for sampling, testing, and analysis of asphalt roll roofing, cap sheets, and shingles used in roofing and waterproofing

    These test methods include procedures for sampling, examination, physical testing, and analyses of asphalt roll roofing, cap sheets, and shingles used in roofing and waterproofing. Other components of these materials are allowed to include, but are not limited to, felts, mats, films, foils, mineral stabilizers, papers, and mineral surfacing. These test methods include tests that ...


    By ASTM International

  • Florida Men Sentenced for Poisoning Wildlife and Hunting Dogs in Bullock County

    Daryl Fischer of Seminole, Florida and Russell Taylor of Loxahatchee, Florida were sentenced on Tuesday, April 28, 2015, to terms of probation for improper use of the pesticide Aldicarb, which is marketed as Temik, announced the United States Attorney for the Middle District of Alabama, George L. Beck, Jr. The two men were members of a hunting club leasing Bucksnort Plantation near Fitzpatrick, ...

  • PRODUCT RELEASE for the MPA-200 Methane Potential Analyzer

    Challenge Technology, an American-based company, has developed the Methane Potential Analyzer (MPA-200), to provide for the measurement of biogas in anaerobic reaction in laboratory testing. The patented FlowCell technology, used with this system, has been the choice of academic and industry researchers for the past 20 years. The MPA-200 will allow the user to monitor and analyze the production ...


    By Challenge Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you