flow measurement equipment News

  • Liquid Flow Measurement

    New turbine flow meters from Kimray are ideal for liquid flow measurement on or off the oilfield. They are a welcome solution to the increasing demand for simple to use measurement equipment. Constructed of 316 Stainless Steel, CD4MCU Stainless Steel and tungsten carbide these simple devices are designed to withstand the demands of the most rigorous liquid flow measurement applications. All ...


    By WIKA Instruments Ltd.

  • Innovative Flow Measurement for full Pipes

    Introducing the NFP in June 2007, NIVUS are proud to provide another further development in the field of high-accuracy permanent flow measurement technology. The new NFP (NIVUS Full Pipe) has been developed particularly for flow measurement in full pipes with diameters between 100 and 800 mm. Right as the NIVUS OCM Pro, the NFP is a so-called profiler based on the cross correlation method ...


    By NIVUS GmbH

  • Flow Measurement using Cable Lengths of 800 Metres

    Bouzey reservoir is situated on the western rim of the French Vosges close to the city of Épinal. The reservoir has a storage volume of approx. 7 million m3 and since 1882 ensures steady water supply for the "Canal des Vosges". To dam up the lake a gravity dam with a height of 20 m and a length of more than 500 m was built of traditional brickwork 130 years ago. The dam structure however ...


    By NIVUS GmbH

  • Flow Pulse – A major advance in non-invasive flow measurement.

    Easy to install and simple to set-up, Flow Pulse uses an acoustic technique never before seen in flow measurement to deliver reliable results across an amazing range of pipe materials and sizes. At a fraction of the installation cost of an equivalent magflow meter, Flow Pulse delivers repeatable, accurate flow measurement. Pulsar Process Measurement's Flow Pulse is a compact and cost-effective ...

  • FlowCERT - the most accurate open channel flow measurement available anywhere

    Pulsar Process Measurement of Malvern announce the launch of FlowCERT, a new non-contacting ultrasonic open channel flow measurement system that uses unique and patented technology to achieve measurement accuracy that was previously impossible, helping companies to achieve the MCERTS standards. FlowCERT consists of a dedicated control unit, which makes calculations to BS3680 across every ...

  • Oil Price Fall will Impact Revenues for Flow Control and Treatment Equipment

    Revenue forecasts for pumps, valves, instrumentation, filters, turbines, etc. have to be reviewed due to the dramatic fall in world oil prices. Here are aspects to be considered: Chronology Time from order date to revenue posting by flow equipment supplier. Large capital equipment such as big pumps experience a multiyear revenue cycle, so 2015 revenues are in part ...


    By The McIlvaine Company

  • Equipment Hire - GA2000

    The GA2000 is the standard 5 gas analyser within the STL Equipment Hire fleet. This infra-red Gas Analyser is suitable for use in regulatory Landfill monitoring investigations for the detection and measurement of Methane, CO2 and Oxygen. The analyser also has built-in sensors for the detection and measurement of Toxic gases CO and H2S. Benefits Simultaneous readings of all gases on ...


  • Equipment Hire - Multiparameter

    Recently introduced to the STL Equipment Hire fleet is a Multiparameter, handheld portable meter for Groundwater quality measurement. Designed for Environmental monitoring the meter has a single, multi-sensor probe which makes it possible to simultaneously measure pH, ORP, EC DO and Temperature. Without the need for several different ...


  • Turbine meter with a single measuring element

    Elster is showcasing its H5000 Woltmann turbine bulk water meter at Wasser Berlin International, Europe's event for water and wastewater from 2nd to 5th May 2011 in Berlin, Germany. A single measuring element improves sensitivity, durability and maintains its useful life even at the highest flow rates. With low-flow capabilities similar to combination meters, the H5000 provides a metrological ...

  • 40 Years of NIVUS Measurement Technology

    Forty years ago, in the spring of 1967, 'Udo Steppe Elektrotechnik' was founded. The former electric wholesaler very rapidly became a measurement technology distributor, emerging as today’s NIVUS GmbH in 1978. Then and now the foremost aim was being capable of providing 'Tomorrow’s Measurement Technology“. From the very beginning NIVUS have been setting new standards doing pioneering work in ...


    By NIVUS GmbH

  • Single-measuring element turbine meter

    Elster is showcasing its H5000 Woltmann turbine bulk water meter at Wasser Berlin International, Europe's event for water and wastewater from 2nd to 5th May 2011 in Berlin, Germany. A single measuring element improves sensitivity, durability and maintains its useful life even at the highest flow rates. The H5000 provides a metrological performance that ensures accurate measurement of minimum ...

  • Autoanalyzer helps protect production equipment

    An automated segmented flow analyzer, the AA3 from SEAL Analytical, is being used at BASF’s manufacturing facility at Ludwigshafen in Germany, to protect manufacturing equipment from corrosion or chemical attack from potential impurities in demineralised water, boiler feed water and steam condensate. Roland Bruenn, who has been with BASF since 1986, is responsible for the analysis of ...

  • Weber Flow-captor 432-.1-M flow switch

    For low flow rate applications within the industrial and metering markets that require a compact, reliable flow switch, Automated Control Engineering Group (A.C.E.) introduces the ...

  • Technology for TASi: High-tech equipment for waste treatment

    It wasn't a law but a simple administrative regulation in the form of a technical guideline that provided the key impulse for the diversion of waste flows in Germany away from landfill sites. In the course of the implementation of this Technical Directive on Residential Waste (TASi), the technology for treating waste underwent an extraordinary development. This is especially true of thermal ...


    By Koelnmesse GmbH

  • Study to measure long-term hard water damage

    Expanding on a major study already underway, the Water Quality Research Foundation has retained an independent testing firm to measure how hard water might damage many common household fixtures and appliances. In February, WQRF hired the Battelle Memorial Institute, a non-profit international science and technology enterprise, to examine the amount of energy savings that water softeners offer. ...

  • China: Hong Kong: water resources equipment

    Hong Kong relies entirely on imported water and wastewater treatment products and technologies to meet its needs. In January 2008, the Hong Kong Government (HKG) allocated funds to build the US$8 million disinfection facilities under the Harbor Area Treatment Scheme (HATS) Stage 2A. This portion of Stage 2A has a completion date in 2009. Another US$1.02 billion will be spent before 2014 on the ...


    By GLOBE Foundation

  • Mobile Discharge Measurement with SOMMER TQ-Tracer System

    Monitoring turbulent rivers with unknown cross-section profiles Sommer GmbH adds a new technology to discharge measurement devices. Discharge measurement of rivers, irrigation channels or technical canals is daily business for hydrologists worldwide. The Sommer TQ tracer system offers new capabilities where conventional equipment, such as mechanical flow meter or ADCP boats, fails. ...


    By SOMMER Messtechnik

  • Easy-to-Operate Flow Meter with high Accuracy

    The NivuFlow 600 was designed particularly for flow metering in full pipelines. To meet the highest accuracy requirements it is possible to equip the transmitter with up to 28 measurement paths. Pipe sensors as well as contactless clamp-on sensors are available for various measurement jobs. It is however not necessary to interrupt running processes to install both sensor types. The measurement ...


    By NIVUS GmbH

  • Highly accurate NIVUS flow meter awarded MCERTS

    An advanced water/wastewater flow meter from NIVUS UK has been awarded MCERTS product certification by SIRA, the body which manages MCERTS on behalf of the Environment Agency of England and Wales (EA). The NIVUS OCM Pro CF (incorporating POA Sensor) Echo Profile Flowmeter is an area velocity flow meter which employs the cross correlation principle to deliver highly accurate open channel flow ...


    By NIVUS GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you