flow meter system News
-
Configurator for optimum Flow Metering Systems
The manufacturer of measurement system provides an easy-to-operate system configurator guiding website users to the appropriate measurement system in just a few steps. Asking not more than 9 questions and providing selectable options accordingly, the configurator guides step by step to the optimum solution for the respective application. The result is a measurement system including the suitable ...
By NIVUS GmbH
-
Record Sales in Flow Technology
The company, developer and manufacturer of flow and level metering systems for water and wastewater applications, is glad about the previous year’s results. Incoming orders in 2015 added up to 16.1 million €, which equals an increase of 12% compared to the year before. The turnover was 15.6 million € (+14%). The lion’s share of this sales increase were the flow metering ...
By NIVUS GmbH
-
Ultrasonic Flow Metering vs. part filled EMF
Flow metering systems for part filled pipes and channels are meanwhile available on the market for many decades. The most popular ones among these systems were the Venturi systems which, however, were pushed out of the market by electronic systems back in the eighties. Nowadays the Venturis are virtually meaningless. Starting in the early nineties, the Doppler systems dominating the market then ...
By NIVUS GmbH
-
ABLE measures capital flow
ABLE is pleased to announce the order award by Morgan Est for flow metering systems in the Thames Water London Ring Main extension. The Ring Main was built to improve the speed and efficiency of moving drinking water throughout the capital. The current ring main is 50 miles long and runs underneath London at an average depth of 40 metres. The tunnel is wide enough to allow a car to pass through ...
-
Large Order from Qatar
The manufacturer of measurement systems is pleased at selling more than 60 metering systems for temporary flow measurement of wastewater and stormwater to the desert state. Including the 20 additional data transmission systems the order is worth some 1.1m €. The self-sufficient flowmeter systems are independent from power supply on site and provide long lifetimes. Furthermore the measurement ...
By NIVUS GmbH
-
Sustainable Measurement System with high Accuracy
The flow measurement system is suitable for continuous flow metering in full pipelines up to DN 800 conducting slight to heavily polluted media. Redesigning the instrument, the electronic components were updated and the enclosure design was modified visually. The integrated memory enables the storage of average flow velocity, medium temperature and flow rate covering a period of up to 7 years. ...
By NIVUS GmbH
-
Clamp-On Mounting System - Contactless With Quick Mounting
The manufacturer of measurement systems provides a quick and easy-to-use fastening system for its contactless flow meter systems using clamp-on sensors. This method uses sensors fastened on the outside of the pipe which measure through the pipe wall. The transit time difference method uses two sensors which are installed exactly in a certain distance to each other depending on the conduct ...
By NIVUS GmbH
-
Contactless With Quick Mounting
The manufacturer of measurement systems provides a quick and easy-to-use fastening system for its contactless flow meter systems using clamp-on sensors. This method uses sensors fastened on the outside of the pipe which measure through the pipe wall. The transit time difference method uses two sensors which are installed exactly in a certain distance to each other depending on the conduct ...
By NIVUS GmbH
-
`Basics of metering systems, flow computers and instrument validation software`: new webinar series for the Oil&Gas industry
Duisburg, June 18, 2020: From June 19 to July 3, PHOENIX CONTACT and KROHNE present the webinar series “Basics of metering systems, flow computers and instrument validation software”. It is aimed at planners, engineers and operators in the oil and gas industry. In a series of 8 webinars hosted by the KROHNE Academy online, the basics behind (custody transfer) metering systems and ...
-
NIVUS, the measurement technology manufacturer celebrates its 50th anniversary
At the 1st of June 1967, company founder Udo Steppe started his own business founding NIVUS. In a time when the first microwave oven was introduced and the first ATMs were put into operation, Udo Steppe began trading in measurement systems for bulk solids and liquids. The beginning of the seventies saw his pioneering work by launching ultrasound technology for industrial level measurement. ...
By NIVUS GmbH
-
FIFTY
At the 1st of June 1967, company founder Udo Steppe started his own business founding NIVUS. In a time when the first microwave oven was introduced and the first ATMs were put into operation, Udo Steppe began trading in measurement systems for bulk solids and liquids. The beginning of the seventies saw his pioneering work by launching ultrasound technology for industrial level measurement. ...
By NIVUS GmbH
-
First self-monitoring for Ultrasonic Flow Measurement
The measurement technology manufacturer is now equipping the NivuFlow 750 flow measurement system with self-monitoring intelligence. Measurement place operators benefit from higher operational reliability. They obtain targeted function checks and can schedule maintenance as needed. Thanks to the help of the self-diagnosis function, the measured values and the functionality of the sensor system ...
By NIVUS GmbH
-
NivuFLow 650 - Intuitive Operation and a wide Range of Sensors
The new transmitter has been developed for accurate flow measurement in open channels, part full and full pipes, and surface water bodies and is compliant with both ISO 6416 & IEC 60041. To meet the highest possible accuracy requirements it is currently possible to utilise the NivuFlow 650 using up to 4 velocity paths, with up to 32 velocity paths available by the end of 2016. It is then ...
By NIVUS GmbH
-
Contactless Flow Sensor for large Pipes
The manufacturer is expanding its range of clamp-on sensors to include another variant that works on the basis of the ultrasonic transit time difference. Due to the measuring frequency of 500 kHz, these sensors are suitable for large pipe diameters or for pipe wall materials such as asbestos cement, GRP or a multi-layer structure. The new sensors also excel in pipes with wall thicknesses of up to ...
By NIVUS GmbH
-
Medium Pressure UV Ensures Peace of Mind for Operators of Wastewater Treatment Plant
UV disinfection technology is fast becoming one of the most popular methods of destroying pathogenic microorganisms in wastewater. Not only is it a low cost technology, it does not produce any of the toxic by-products associated with conventional chlorine-based disinfection. An important factor that designers of UV systems have to take into account, however, are fluctuations in wastewater ...
-
ADS Environmental Services Announces New IntelliServe
ADS Environmental Services is proud to introduce IntelliServe II, our newest version of the IntelliServe platform. IntelliServe II is designed to provide web-based data collection and analysis for collection system managers with temporary or permanent environmental data metering and in particular wastewater flow metering networks. IntelliServe II provides direct access to documents, photos and ...
-
New Accusonic Flowmeter System Measures Up to 64 Points - 10-Path Units Network for Highest Flow Measurement Accuracy
West Wareham, MA - Accusonic® Technologies, a Division of ADS® LLC, today announces the only flowmeter system with 18-Path flow measurement capability meeting ASME PTC 18-2002. The Accusonic Model 7700-7720™ is the largest integrated real-time flowmeter network system available with transit-time technology for hydroelectric and fossil power plant applications. The new Accusonic Model 7720 ...
-
NivuFlow Mobile 550 - Self-Sufficient Flow Metering using Radar
The manufacturer’s NivuFlow Mobile 550 detects the flow rate in water by using CW-Doppler-Radar. Latest hydraulic models allow for highly accurate flow measurements within usual channel shapes. Due to sophisticated power management and rechargeable batteries with high capacities the system is perfectly suited for long-term measurements as well as for continuous metering without the ...
By NIVUS GmbH
-
The First Centrifuge Pod System Launched
Designed to meet the growing needs for water clarification and solids dewatering in the extractive industries, the CentriPod system comes in two specially designed containers enabling easy transport and installation and can be operational within few hours from arrival on site, providing that all services are available. The system incorporates the expertise and technologies of three leading ...
-
GE Oil & Gas Expands Offshore Drilling Blowout Preventer and Remote Monitoring and Diagnostics Capabilities
Offshore Technology Conference (OTC): GE Oil & Gas (NYSE: GE) has expanded its suite of blowout preventer (BOP) and remote monitoring and diagnostic (RM&D) technologies for the offshore drilling industry. The newly launched, technology-intensive products will help offshore drillers increase equipment performance, safety and reliability and optimize operational ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you