ftir monitoring system News

  • FTIR for CEM’s and VOC’s monitoring

    As major contributors to environmental emissions, the waste incineration and power generation industries require both continuous and periodic emissions monitoring to ensure each plant is within Emission Limit Values (ELVs). FTIR provide to perform emissions monitoring solutions for the range of standard incineration or “combustion” gases, both inorganic species such as CO, NOx, SO2, ...


    By ETG Risorse e Tecnologia

  • FTIR provides monitoring flexibility for Catalyst Environmental

    ENVIRONMENTAL instrumentation specialists Quantitech, recently supplied emissions monitoring company Catalyst Environmental, with a range of instruments that has enabled the company to provide a market-leading range of services across a particularly broad spectrum of applications. In the case study described below, the advantages of multiparameter gas analysers from Quantitech are exemplified as ...


    By Quantitech Ltd

  • MCERTS for portable and fixed FTIR analysers

    Quantitech is delighted to announce that the Gasmet Continuous Emissions Monitoring System (CEMS II e) and the portable (DX4000) FTIR analysers have been awarded an MCERTS certificate (Sira MC030014/08) demonstrating compliance with the MCERTS Performance Standards EN15267-3 & QAL 1 as defined in EN 14181. The certificate demonstrates enhanced performance across an extended range of gases. ...


    By Quantitech Ltd

  • Certification for enhanced FTIR emissions analyzer

    Gasmet Technologies is delighted to announce that its CEMS II e continuous emissions monitoring system has successfully completed EN 15267-3 testing using FTIR technology for the analysis of low range HF, low range NO, CH4 and Formaldehyde. “This means that it meets the performance specifications in European directives and also the more stringent specifications in the type approval standard ...


    By Gasmet Technologies Oy

  • On-site analysis of cannabis potency using Infrared spectroscopy

    Cannabis is increasingly being recognised for its therapeutic value. This has led to a reduction in its regulation, and even its legalisation, by many different governments. As cannabis production becomes legalised and regulated it is important that manufacturers can assess the chemical content and potency of their plants. The value of cannabis in the control of pain, spasm and a range of ...


    By Specac Limited

  • FTIR Gas Analyser Supports Carbon Capture Research

    Quantitech has commissioned an advanced Gasmet FTIR multiparameter gas analyser at the UK Carbon Capture & Storage Research Centre (UKCCSRC) facility near Sheffield. This Pilot-scale Advanced Capture Technology (PACT) facility was created to catalyse and support both industrial and academic research. PACT Business Development Manager Dr Kris Milkowski, from the University of Leeds, says: ...


    By Quantitech Ltd

  • Certification boosts demand for FTIR multigas analyser

    Quantitech has experienced a surge in demand for the Gasmet portable FTIR emissions analyser, the DX4000. “We believe that this instrument is now the only portable FTIR with MCERTS certification, and this is driving demand for both instrument rental and sales,” says Dominic Duggan. The Gasmet DX4000 portable FTIR gas analyser is typically used in stack emissions monitoring, comparison ...


    By Quantitech Ltd

  • Investigate C-H functionalization with in situ FTIR

    The past two decades has seen an explosive growth in the development of methods for C-H functionalization. These methodologies provide a wide range of very useful techniques for the synthesis of a diverse range of complex targets, such as natural products and active pharmaceutical ingredients. Webinar: Impact ...


    By Mettler - Toledo Int. Inc

  • New portable FTIR gas analyser available for hire

    The new Gasmet DX4040 portable FTIR multi-gas analyser is now available for hire from Quantitech Limited. For each rental Quantitech’s Dr Hobson configures the instrument to meet the customer’s specific gas monitoring needs. He says: "The DX4040 has brought laboratory grade gas analysis into the field and the availability of a rental system means that even those with a limited budget ...


    By Quantitech Ltd

  • Gas analysis workshop focuses on FTIR versatility

    Gasmet Technologies, the manufacturer of FTIR gas analyzers, organised a meeting in Lisbon, immediately prior to the CEM 2016 conference and exhibition in May, to provide delegates with an insight into the wide variety of applications for which FTIR technology is employed. The measurement of greenhouse gases (GHGs) was a particular focus for the event, with presentations from a number ...


    By Gasmet Technologies Oy

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • Gasmet highlights novel applications for FTIR gas analysis at Achema 2015

    The Gasmet stand at ACHEMA, C53 in hall 11.1, will focus on the wide variety of applications for which FTIR gas analysis is now being applied, and will feature an innovative technology for the characterisation of paints and coatings. Traditional applications for FTIR include stack gas and process monitoring, in addition to occupational safety and environmental investigations. However, the Gasmet ...


    By Gasmet Technologies Oy

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical products. ...


    By Quantitech Ltd

  • Cerex Introduces the New AirSentry FTIR Open Path Analyzer

    Cerex Monitoring Solutions is pleased to announce the release of the third generation model AirSentry FTIR multi-gas open path FTIR analyzer. The decision was made to fully redesign the analyzer to take full advantage of advances in hardware and software technology. The third generation design represents a full reconfiguration of the instrument. Goals were to reduce initial and operating costs ...

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • Gasmet Technologies And Cems Experts Sign Distribution Agreement For The US West Ftir Cems Market

    CEMS Experts, a California based systems integrator for Continuous Emissions Monitoring Systems (CEMS) has entered into a distribution agreement with Gasmet Technologies, a Finnish based technology company focused on advanced FTIR gas analyzers and monitoring systems.  The CEMS Experts team will apply their extensive knowledge and experience marketing the Gasmet™ line of FTIR gas ...

  • ABB emissions monitoring system helps clear the air in Chile

    The solution is a vital component in Polpaico’s efforts to reduce greenhouse gas emissions at its Cerro Blanco cement plant near Santiago and help Chile’s leading cement manufacturer improve air quality in the country’s most populous region. According to the World Health Organization, air quality in Santiago rates among the world's worst. That is largely because greater Santiago is built in a ...


    By ABB

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Quantitech Offers ‘Future-proof’ Monitoring Technology

    Quantitech reports brisk business across it's whole range of environmental emission monitoring equipment and will use MCERTS 2007 to explain the advantages of the latest technologies. A portable FTIR monitor will be on display at Stand 26/27 and Quantitech will run FTIR Workshops in Room 1 at 2.15pm on Wednesday 25th April and again at 3.45 pm on Thursday 26th. The DECS (Dioxin Emission ...


    By Quantitech Ltd

  • Monitoring at biomass plants should be `future proof`

    The recent rise in approvals for the construction of renewable energy plants burning biomass has highlighted the need for specified monitoring equipment to be both cost-effective and flexible. Quantitech Director Dominic Duggan explains: “Whilst biomass power represents an important part of the Government’s strategy to produce energy from renewable sources and to reduce waste to landfill, a ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you