gas flow calibration News

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • LCU: a new, versatile device for trace gas calibration

    Discover a new calibration method for trace gas analyzers over an extensive range of compounds and concentrations.  ...


    By Ionicon Analytik Ges.m.b.H.

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • Coastal Flow Hosts Iraq's Technical Committee on Metering & Calibration

    Coastal Flow Measurement today announced that it recently hosted a visiting delegation for Iraq's Joint Technical Committee on Metering and Calibration through a program sponsored by the Commercial Law Development Program (CLDP) of the U.S. Department of Commerce and the Bureau of Safety and Environmental Enforcement (BSEE) of the U.S. Department of the Interior. With resurrected and burgeoning ...


    By Marketwire

  • New advances in air sampling and air flow calibration instruments

    F&J SPECIALTY PRODUCTS, INC. (F&J) has enhanced the usefulness of its “Digital Flowmeter” air sampling systems. F&J has implemented hardware and software modifications that enable a user to select either the reporting of (1) internationally recognized reference temperature (T) and pressure (P) conditions for gas volume values or (2) flow and volume values at local ambient conditions of barometric ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • Addition of in-built calibration gas dilution function to our range of FTIR Gas Analysers

    Protea are proud to announce the addition of in-built calibration gas dilution function to our range of FTIR gas analysers. This feature, using precision a Mass Flow Controller within the analyser, allows the FTIR user to dynamical calibrate their FTIR gas analyser from within the FTIR software at the touch of a button. Without the need for expensive external gas dilution equipment, FTIR gas ...


    By Protea Limited

  • Lifetime accuracy of flow measurement

    The calibration cycle of Endress+Hauser’s devices starts in our factories. From the first day after installation in your plant, the devices measure with the highest accuracy. In order to maintain this level over the entire device life cycle, calibration services help you profit. Our mobile flow calibration rigs use the same calibration standards as in our production centers. On-site you ...


    By Endress Hauser

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • Environics Series 9100 Computerized Ambient Monitoring Calibration System Dilution Range Expanded

    Environics Inc, a world leader in computerized gas flow instrumentation, headquartered in Tolland, Connecticut, is pleased to announce that the Series 9100 Computerized Ambient Monitoring Calibration System has been modified to support an additional thermal mass flow controller (MFC). Now, like our Series 6100 and Series 6103 systems, the Series 9100 can house up to three (3) MFCs, giving the ...


    By Environics, Inc.

  • ASTM B810 - 01a(2011) standard test method for calibration of atmospheric corrosion test chambers by change in mass of copper coupons

    Electrical devices that contain electrical contacts generally contain some copper-based materials. Atmospheric corrosion of copper parts in such devices often occurs in service environments. A quantitative measure of the effect of a laboratory corrosion test on copper permits assessment of the severity of the test. In addition, corrosion tests may be defined in terms of their effect on copper; ...


    By ASTM International

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • New Biogas Flow Measurement White Paper

    Sierra Instruments, a leading global mass flow instrument manufacturer, announces their new biogas measurement white paper available now for free download. Sierra’s new white paper offers engineers, as well as plant and facilities managers, solutions for precise biogas measurement even with the changing gas composition, an inherent application challenge in ...


    By Sierra Instruments, Inc.

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • Sierra Showcases Online Flow Meter Solutions at Pittcon

    Sierra Instruments, a global leading manufacturer of mass flow meters and controllers, announces today that they will showcase their mass flow meter and mass flow controller online store at the Pittcon Expo 2013 in Philadelphia, Pennsylvania. By harnessing the emerging e-commerce trend for selling customized instrumentation online, Sierra’s online store offers ...


    By Sierra Instruments, Inc.

  • MEMS based Thermal Mass Flow Technology

    Axetris uses proprietary MEMS-based thermal mass flow measurement technology to design its range of mass flow solutions. The temperature differential of a miniscule sample of the gas is measured during flow across a MEMS chip (see picture). The temperature differential thus measured results in a mass flow measurement that is the building block to a superior mass flow product. Compared with a ...


    By Axetris Ag

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you