gas sampling probe News

  • New sample gas probe for operating temperatures up to 280°C

    In the process of extractive gas analysis, it is essential to stabilise the operating temperature of the sample stream above a certain level. If the sample gas would undercut these limits, acids could fall out or chemical reactions could take place, e.g. salt or other crystals may be formed. Unexpected acid condensate could increase the corrosive property of the gas or the precipitation of solids ...


    By Bühler Technologies GmbH

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • CEMTEC - Self-cleaning probe for cement plant kiln inlets

    CEMTEC provides many years of operation in cement kilns or in applications with high temperatures and/or high dust loads. The patented CEMTEC consists of a watercooled probe, which is mounted on a pneumatic propulsion device and travels in and out of the combustion process. In addition to the InSitu sensors for the instantaneous O2 and COe analysis, a heated gas ...


    By ENOTEC GmbH

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • NEW Low NOx/SOx Measurements with Sampling Conditioning Unit

    Problem The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device. The measured readings could be in excess of 20% lower than the actual values in the ...

  • Syngas Cleaning Station for Gas Analysis

    Remove TAR , Dust & Water vapour Transportable with 3 refillable bubbler Inlet from process Hi-Temperature probe Peltier cooler with 1 heat exchanger Internal Sample pump Gas sample out dry @ 5 ⁰C Max Flow sample out 300 Nl/h Low cost of ownership Cooler maintenance free Universal uses in sampling gas ...


    By ETG Risorse e Tecnologia

  • Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

    Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint ...

  • Hiden Membrane Inlet Dissolved Gas and Vapour Monitor

    The Hiden Analytical HPR-40 Membrane Inlet Mass Spectrometer series now feature an extended range of submersible insertion probes and flow-through semi-permeable membrane interfaces, specifically engineered for measurement of dissolved gases and vapours in aqueous solution in diverse environments and applications. The systems provide real-time analysis of biological and physical processes within ...


    By Hiden Analytical

  • On-Site Gas Analysis like Never Before

    Gasmet Technologies from Finland is a leading manufacturer of FTIR gas analyzers for demanding industrial gas monitoring applications. The latest addition to the Gasmet product family is the Gasmet Dx-4030, which is the first truly portable FTIR gas analyzer on the market. The key to Gasmet Dx-4030’s unique portability lies in its ingenious construction; the analyzer module is located in a sturdy ...


    By Gasmet Technologies Oy

  • GASTEC tubes: Best solution for short-term gas measurement requirements

    The GASTEC detector tubes present superior advantages in comparison to traditional electronic gas detection. They are cost effective, easy to use, do not require calibration and do not require further laboratory analysis. Providing fast & accurate results in the field, GASTEC tubes are ideal for spot ...


    By a1-cbiss

  • a1-cbiss to Exhibit New Multi-Gas Analyser at RWM

    a1-cbiss will be promoting an MCERTS certified CEM system at RWM plus the latest Ankersmid Gas Conditioning Components RWM in partnership with CIWM is Europe’s premier event dedicated to resource efficiency and waste management solutions. The event is shaped around the demands of this rapidly growing sector and spans each element of the waste hierarchy. a1-cbiss will be present once again ...


    By a1-cbiss

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical products. ...


    By Quantitech Ltd

  • One-touch analysis to guarantee high quality standards for welding gases with the AGC Veri-GAS analyser range

    These handheld gas analysers employ industry-leading components at their core combined with AGC’s cutting-edge engineering solutions and are specially designed for a range of sampling applications. With armored tubing and specialised filtration and flow-limiting devices utilised, these analysers perform straightforward, fast and accurate readings at the touch of a button. The ...


    By AGC Instruments Ltd.

  • Ametek Process Instruments wins major contract for sulfur analyzers at al Hosn gas project

    AMETEK Process Instruments has been awarded a contract to supply UV process gas analyzers for the Sulfur Recovery Units (SRU) and Tail Gas Treating Units (TGTU) at the Abu Dhabi Gas Development Company’s (Al Hosn Gas) Shah Gas Field project in the United Arab Emirates. The contract is valued at approximately $4.6 million.   Saipem, a leading oil and gas engineering, procurement and ...

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • Buehler Technologies presents the latest developments at Achema 2012

    Bühler Technologies, Ratingen, has a well established position as global supplier of fine products fort the gas analysis. Either in CEMS or process applications lay the system components from Bühler Technologies the ground for the design of reliable and efficient gas analysis systems. Our domestic sales includes also process refractometers and dust monitors. At the forthcoming Achema ...


    By Bühler Technologies GmbH

  • EnergyTech 201 Coalmill CO Analyser Installed at Eggborough Power Station

    CODEL have successfully completed extensive field trails of the new EnergyTech 201 at Eggborough Power Station which has highlighted extreme performance, reliability and repeatability with low maintenance operation. The early detection of coal fires in coal handling systems on coal fired power stations is essential to prevent catastrophic damage to expensive plant and serious injury to personnel. ...


    By Codel International Ltd

  • Continuous Mercury Monitoring with State-of-the-Art Technology = Gasmet CMM

    With the introduction of ever tightening legislation for emissions, new challenges are also facing the equipment that is used for continuous monitoring of trace pollutants. In the United States, the Clean Air Mercury Rule will establish strict limits for Mercury emissions from coal-fired power plants. Gasmet Technologies decided to meet this challenge with a novel approach together with the ...


    By Gasmet Technologies Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you