gasket sealing News

  • Reduce emissions and odors with Shand & Jurs` Expanda-Seal

    With reducing emissions having an increased importance, Shand & Jurs offers Expanda-Seal technology. Expanda-Seal is a patented seal on pressure relief devices that will significantly reduce emissions and odors in every process environment imaginable while also saving valuable product. While industry standards have a tested leakage rate of 1 SCFH at 90% of set point, Shand & Jurs' ...

  • ASTM C1619 - 11 standard specification for elastomeric seals for joining concrete structures

    This specification covers the physical property requirements of elastomeric seals (gaskets) used to seal the joints of precast concrete structures used in gravity and low head pressure applications. The seals shall be classified as: Class A; Class B; Class C; Class D; and Class E. All gaskets shall be extruded or molded in such a manner that any ...


    By ASTM International

  • Ahlstrom to exit sealing & shielding business through the sale of Altenkirchen site in Germany

    Ahlstrom Corporation, a global leader in nonwovens and specialty papers, has today signed an agreement to exit its Sealing & Shielding business unit through the sale of Ahlstrom Altenkirchen GmbH in Germany. The acquirer is Interface Solutions, a portfolio company of Pennsylvania-based family owned private equity fund Susquehanna Capital. The value of the transaction is approximately EUR 6.5 ...


    By Ahlstrom Corporation

  • Worker endures 3 surgeries after press crushes hand at seal manufacturer

    A hydraulic press crushed a 62-year-old machine operator's left hand at a seal and gasket manufacturer, resulting in multiple broken bones. The injured worker, a 15-year employee, has been unable to return to work and has endured three surgeries as a result. U.S. Department of Labor Occupational Safety and Health Administration inspectors found in January that Lauren ...

  • ASTM D3139 - 98(2011) standard specification for joints for plastic pressure pipes using flexible elastomeric seals

    This specification covers the two types of joints, mechanical joint and push-on-joint, required for plastic pipe pressure systems with a wall thickness equal to or greater than that of SDR 64 intended for use in supply and distribution lines for water using flexible elastomeric seals. The joint ...


    By ASTM International

  • Plastic processing Industrial Machines

    If You are interested in cable-wire and plastic processing industry machines, Demir Makina produces;If your business  related to plastic extruder machines,we will be proud to  work with you. - Cable-wire machines - Pipe machines - Hose machines - PVC seals, gasket machines - PVC ...


    By Demir Makina

  • Kaeser genuine compressed air parts

    Accept no imitations when it comes to parts for your Kaeser compressed air equipment. Whether it's preventive maintenance or repair items, buying Kaeser Genuine Parts ensures the correct fit, maximum system efficiency, reliability and safety.Kaeser Genuine Parts are engineered to keep your compressed air system running at peak performance. From seals and gaskets, to belts and hoses, to valves and ...


  • New spare parts kits

    We have pleasure to inform that with effect from Friday 10/01/2010 the “Parts” section of our website http://www.zenit.com will be updated with the addition of the new “SPARE PARTS KITS”. Please note that the kits available relate to the electric pump models added to the range from issue of the ...


    By Zenit Europe S.A.

  • Garlock honored for environmental leadership

    The Rochester Business Journal today honored Garlock Sealing Technologies for its environmental leadership. The company, a leader in fluid sealing technology for more than 100 years, was one of three honorees in the category of environmental innovation, based on its conversion to a more environmentally friendly material for gasket production at its Palmyra, N.Y. facility. Other award categories ...

  • Glass Lined Bolted Steel Tanks: I Can See Clearly Now…

    In recent years, glass lined bolted steel tanks have become more frequent despite the higher initial cost. The arguments for a glass lined tank are simple: glass coating is non-porous and very rigid. Therefore, the theory is that liquids cannot reach the steel and cause corrosion, which could destroy the tank. Unfortunately, there are a few details which impact performance of glass lined bolted ...


    By Superior Tank Co., Inc.

  • NEXT GENERATION ULTRAGRIP – A UNIQUE PIPELINE JOINTING SOLUTION IN DIAMETERS UP TO 400MM

    Viking Johnson has launched an exciting new design of its proven UltraGrip range of fully restrained pipeline coupling joints for water and gas applications. Now available in diameters up to 400mm, UltraGrip provides the ultimate sealing and gripping solution on ...


    By Viking Johnson

  • All-New Sanitary Box Dumper from Flexicon

    An all-new TIP-TITE® Sanitary Box Dumper from Flexicon forms a dust-tight seal between the container and the equipment, tips the container, and discharges bulk material at controlled rates. The unit is intended for dumping of bulk foods, pharmaceuticals and contamination-sensitive chemicals from boxes weighing up ...


    By Flexicon Corporation

  • Pump Repair Kits

    Cornell is offering pump repair kits for select models of pumps. With genuine Cornell parts, you help protect your warranty, and know that you are using the same quality parts we have made in Oregon since 1946. These kits feature parts commonly used together for pump maintenance such as: Wear rings Shaft sleeves Volute gaskets Impeller washers Lockscrew ...


    By Cornell Pump Company

  • Microcom Design releases a Compact Express Environmental Monitoring System

    The EXPRESS is a unique packaging of Microcom’s GTX-1.0 Satellite Transmitter-Datalogger and UBX Satellite Antenna, combined with a power supply. This package is compatible for use in GOES, Meteosat and GMS networks. For basic sensor configurations, the EXPRESS has a built-in 1 watt solar panel (located in the antenna cover), for more complex configurations an external solar panel is added. The ...


    By Microcom Design

  • New sigma brand all-weather refrigerated sampler cabinet from Hach stands up to extreme environments

    Hach Company now offers a new and improved Sigma All-Weather Refrigerated Sampler Cabinet. A true all-weather unit, this cabinet's robust design ensures operation in the face of environmental challenges (corrosion, UV, standing water, rodents, corrosive gases), maintains accurate temperature control, protects sample quality, and provides security in remote operation. Comprised of a linear, ...

  • New Dust Collector Hoppers Fit Low-Profile Applications

    Camfil APC has introduced two new dust collector hoppers for use where space constraints dictate the use of a low-profile dust collection system. Designed to fit Farr Gold Series® cartridge dust collectors, theLow Prohopper is best suited to collection of dust and fumes from cutting, blasting, welding and thermal spray operations; while theLow Boyhopper is for use with heavier dust-loading ...

  • Camfil Farr APC Updates Gold Series® Dust And Fume Collectors

    Camfil Farr APC has announced major updates to its popular line of Gold Series® cartridge dust and fume collectors. The revamped line features a number of design changes and cosmetic enhancements plus an expanded menu of options to ensure a clean workplace in all types of industrial environments. "We've made these changes to uphold our mission statement – to supply the best dust ...

  • Single-Trip Bulk Bag Unloader with Flexible Screw Conveyor

    A new Single-Trip Bulk Bag Unloader from Flexicon allows rapid, low cost discharging in low headroom areas, and conveying of the material at any angle to downstream processing, storage or packaging equipment. The unloader relies on the user's forklift or plant hoist to lower single-use bulk bags onto a four-bladed bag piercing knife that cuts the ...


    By Flexicon Corporation

  • Larson Electronics releases a Class 1 Division 2 Fluorescent Light Fixture with Pole Mount Brackets

    Larson Electronics has added to its extensive range of industrial grade lighting equipment with the release of a Class 1 Division 2 fluorescent light fixture equipped with stainless steel pole mount brackets and designed for use in wet areas and marine environments. The ...


    By Larson Electronics LLC

  • New F-Series Double Gang Boxes and Covers from IPEX

    IPEX’s line of Scepter® F-Series double gang boxes, weatherproof covers and cover plates have been re-designed to meet industry standard dimensions, facilitate installation and reduce inventories. The FS and FD Blank double gang boxes are up to 1” deeper than their competing counterparts, providing extra space for wiring and electrical devices installed within the box. The FS double gang boxes ...


    By IPEX

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you