gear pump News

  • Gearing up for Pump School

    Participants rate Cornell’s Pump School highly for content, instructor knowledge, and hands-on training. Join us for Pump School September 22nd and 23rd, 2015 for two days of seminars and training in Beautiful downtown Portland, Oregon. While ...


    By Cornell Pump Company

  • DESMI ROTAN Pump Geared for Thin Film Evaporator

    Separation technology is one of the three major technologies in chemical production, and the quality of the separation process has a great impact on product quality, efficiency, consumption and benefits. A film evaporator is a kind of equipment conducting the separation based on the volatility of different materials widely used for evaporation, condensation, desolventization, purification, ...


    By DESMI A/S

  • New DESMI ROTAN HD internal gear pump video

    Electric motor according to IEC, NEMA etc. Flexible spare coupling allows easy acces to Pull-out unit without removing the motor for minimum downtime. The modular design also allows easy acces to the moving parts of the pumt due to the front pull-out. In the video you will be able to see all features and specifications and the liquid flow. See ...


    By DESMI A/S

  • East Africa gets into gear for cleaner, greener fuel

    In a move that is set to improve air quality and reduce vehicle emissions across East Africa, Kenya has officially launched its transition to low-sulphur diesel. Containing only 5% of the amount of sulphur present in Kenya's previous diesel supply, the cleaner fuel is already available in limited stations and will soon be present in pumps across the country. This new milestone for cleaner fuel in ...

  • Moyno launches improved gear joint for maximum performance and longevity

    Moyno, Inc.’s proprietary gear joint design is now improved to offer decreased wear, reduced friction and increased loading capabilities. The improved gear joint is used on all new Moyno 2000, Moyno 2000 WA, and Moyno 2000 WB pumps. The improved gear joint is also available as a drop-in replacement for any existing Moyno 2000, Moyno 2000 WA, and Moyno 2000 WB pump models and requires no ...


    By Moyno, Inc.

  • Pumping yeast in wineries with a peristaltic pump

    The process of fermentation Winemaking or vinification starts with the selection of grapes. After harvesting the grapes, they are taken to a winery for fermentation. Red grapes are made from the pulp fermented along with the skin, which gives it the real colour. Whereas white wine is made by fermenting the juice extracted from the grapes. Traditionally the grapes were collected in ...

  • Peristaltic pumps for pumping concrete-fibreglass mixture

    Pumping concrete-fibreglass mixture Concrete is composed of cement and “other ingredients” such as limestone, gravel, granite, fly ash, etc. Some soft-grind components such as sand and parts of water will give you a perfect concrete structure. Concrete is a very heavy fluid (normal concrete = 2400 kg/m3). Concrete is viscous and very abrasive because of the sand and ...

  • Introducing the Remote Pump Head

    Occasionally we have to pump some liquids with extreme temperatures that are either too hot or too cold. In either case, these temperatures could potentially cause long term wear and possible damage to the internals of the gear housing and the hydraulic oil it contains. AquFlow’s Remote Pump Head is designed to keep that temperature related effect away from the rest of the pump components ...


  • Thompson Pump’s 2010 Pumpology® School

    Thompson Pump & Manufacturing Co., Inc., held their 20th annual Pumpology® School April 21-23, at their corporate facilities in Port Orange, Fla. Thompson Pump hosted more than 40 attendees from 15 states and three foreign countries.  The three-day workshop included training sessions for sales and service-oriented professionals on pumping fundamentals, dewatering and bypass ...


    By Thompson Pump

  • Bredel pumps replace piston pumps on cement slurry projects

    90 Bredel heavy duty hose pumps ordered as part of €1.8m Chinese concrete grouting projects at sea Abrasive cement/sand/water mixture no problem for Bredel hose pumps Reduced downtime, maintenance and spare parts costs  Bredel hose pumps from Watson-Marlow Fluid Technology Group (WMFTG) ...

  • Dosing yeast for wine fermentation with a verderflex pump

    In the process of wine making, yeast is used to convert the sugar contained within the grape juices into alcohol. At the end of this process the yeast is removed to avoid spoiling of the flavour of the wine and to leave it with a clear appearance. The process of wine fermentation The grapes need to be completely ripe. If this is not the case the flavour and the taste of the wine can ...

  • Self-Contained, Sludge Pumps for Remote Locations from Watson-Marlow Bredel Pumps

    Watson-Marlow Bredel has designed a bespoke pump system for J N Bentley Ltd of Skipton, North Yorkshire. The system consists of self-contained desludging units complete with diesel generators for sites operated by Yorkshire Water. The units, consisting of either an SPX40 or SPX50 pump have been designed for operation in remote pumping stations and at locations lacking an adequate power ...

  • Larox Flowsys expands its peristaltic pump range

    Larox Flowsys, the preferred supplier of cutting-edge flow control technology, announces the launch of its product range expansion with the Larox LPP-T32 and LPP-T50 peristaltic pumps. In addition to these new sizes a whole new pump model, LPP-M for accurate metering, was launched in June 2008. “We have expanded our peristaltic pump product group with the sizes LPP-T32 and LPP-T50”, says Matti ...


    By Flowrox Inc.

  • DESMI’s Magnetically Powered Pumps Seal the Deal

    The list of potentially dangerous or simply-too-expensive-to-lose substances being pumped from one part of an industrial process to another somewhere in the world is long. Take isocyanates, for example. They’re the raw materials that make up all polyurethane products. Despite their relatively low acute toxicities, isocyanates can present harmful effects to the eyes, skin and respiratory ...


    By DESMI A/S

  • Peristaltic pumps drive the UK’s move towards desalination

    Desalination – the treatment to turn seawater into tap water – is rapidly gaining ground in the UK. Nicola Martin discovers the crucial role that peristaltic technology is playing in this type of water treatment.Following trials and small-scale plants in the drought-ridden South East, the UK’s first large-scale desalination plant is due to open in 2010 at Beckton, East London. Treating seawater ...

  • Moyno 2000 CC pump offers versatility and cost-efficiency

    The Moyno 2000 CC pump provides unmatched performance in a competitively priced, compact, close-coupled configuration. It is designed for municipal and industrial applications where close-coupled configurations are preferred, but the robustness of a gear joint drive is needed. The Moyno 2000 CC features a sealed gear-type universal joint drive train and optimized rotor/stator pumping element ...


    By Moyno, Inc.

  • Moyno 2000 progressing cavity pump handles wide range of applications

    Moyno, Inc. offers the Moyno 2000 Progressing Cavity Pump. This versatile, high-performance pump is designed to handle a wide range of applications from shear-sensitive chemicals to difficult-to-process slurries and sludges. The Moyno 2000 Pump features the highly acclaimed crowned gear universal joint drive train configuration to provide exceptional torque and thrust control. Patented joint ...


    By Moyno, Inc.

  • The advantage of Using CNC Grinding Machine in Hydraulic Pump Processing

    Hydraulic pump is the power of the hydraulic system components, which is driven by the engine or motor, suction pressure oil from the hydraulic oil tank, formation pressure oil discharge, and a components to the implementation of the components. According to the structure is divided into gear pump, plunger pump, hydraulic pump vane pump and screw pump. Due to these characteristics of ...

  • S. Dyrup & Co. selects magnetically coupled ROTAN pumps

    S. Dyrup & Co.’s factory manager, Steen Hoff, states “Rotan pumps have for decades been used in numerous of our plants. The ED model was chosen due to it’s magnetic coupling. A magnetically coupled design, which has no rotating seals, ensures less downtime and lower operating costs. Every pump in our new facility is magnetically coup-led, and thus we have eliminated the ...


    By DESMI A/S

  • The advantage of Using CNC Grinding Machine in Hydraulic Pump Processing

    Hydraulic pump is the power of the hydraulic system components, which is driven by the engine or motor, suction pressure oil from the hydraulic oil tank, formation pressure oil discharge, and a components to the implementation of the components. According to the structure is divided into gear pump, plunger pump, hydraulic pump vane pump and screw pump. Due to these characteristics of ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you