glass laboratory equipment News

  • Humboldt State University launches new environmental laboratory

    Dr. James Russell of the Humboldt State University Department of Applied Technology is holding a brick that looks like leftover supplies mashed together after art class, but it could be a great way to repurpose used styrofoam for building insulation. The idea, originated by Roger Pryor of Bayside Builders, is exactly the sort of thing that Dr. Russell and others behind the GreenLab at Humboldt ...

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • Severn Trent Laboratories introduce automated process for scheduling analysis from the MP-5 monitoring scheduler

    Working in partnership with STS and Viridor, EHS Data have developed an automated solution for collecting data on the analytical requirements of their customers. STL will be exhibiting at Sustainabilitylive!, NEC, 20th-22nd May, Futuresource, Excel, between 15th-17th June. As part of their Environmental Permitting obligations, Viridor, one of the UK's leading waste management companies, send ...


    By EHS Data Ltd.

  • ASTM E784 - 89(2011) standard specification for clamps, utility, laboratory, and holders, buret and clamp

    This specification covers clamps and clamp holders for use in securing laboratory apparatus to support stands. The clamp and clamp holders are classified into types, sizes and classes and are presented in details. Clamps and clamp holders shall be manufactured from aluminum-base alloy, zinc-base alloy, or cast ...


    By ASTM International

  • Severn Trent Laboratories introduce automated process for scheduling analysis from the MP-5 monitoring scheduler.

    Working in partnership with STL and Viridor, EHS Data have developed an automated solution for collecting data on the analytical requirements of their customers. STL will be exhibiting at Sustainabilitylive!, NEC, 20th-22nd May Futuresource, Excel, between 15th-17th June. As part of their Environmental Permitting obligations, Viridor, one of the UK's leading waste management companies, send ...


    By EHS Data Ltd.

  • ASTM E50 - 11 standard practices for apparatus, reagents, and safety considerations for chemical analysis of metals, ores, and related materials

    The inclusion of the following paragraph, or a suitable equivalent, in any standard (preferably after the section on Scope) is due notification that the apparatus and reagents required in that standard are subject to the recommendations set forth in these ...


    By ASTM International

  • New design in filtration glassware

    Ace Glass has redesigned the membrane filtration glass apparatus used by many laboratories today. ACE has utilized their famous Ace-Thred® to eliminate the troublesome metal clamping device that has been used for years. The filter funnel and flask base are now joined by a nylon threaded adapter that threads the pieces directly together, thus making a better seal and eliminating leakage. The ...


    By Ace Glass, Inc.

  • AMETEK Land India secures NABL calibration lab accreditation

    The AMETEK Land India laboratory, which was established and began calibration and repair operations in 2011, is the first OEM (original equipment manufacturer)-approved facility to receive NABL accreditation. It is accredited to offer thermal calibration in the range of 0ºC to1600ºC for tests carried out in-house and 0ºC to1200ºC for on-site calibrations. In addition, the ...


    By AMETEK Land

  • Innov-X Systems, Inc. and BT-Wolfgang Binder work together to develop automated plastics sorting system

    Innov-X Systems, Inc. and BT-Wolfgang Binder GmbH recently announced they are increasing their level of cooperation by further developing their REDWAVE QXR technology; this time for the plastics recycling markets. Earlier this year, Innov-X and BT-Wolfgang Binder entered into an OEM agreement to develop and market a new high volume glass sorting system -- the REDWAVE QXR-G. This system combines ...

  • Distek, Inc. Releases BIOne Single-Use Bioreactor System

    From the company that has brought you 40 years of excellence in laboratory pharmaceutical instruments, Distek, Inc. is proud to introduce the BIOne (pronounced “BIO One”) Single-Use Bioreactor System. Distek, Inc. has developed a benchtop scale single-use bioreactor (SUB) system for mammalian cell growth and recombinant protein production. The pre-sterilized BIOne system is ...


    By Distek, Inc.

  • Lead Exposure at Ohio Workplace Costs Company $126,700

    � An Ohio-based glass company has been cited by the U.S. Department of Labor’s Occupational Safety and Health Administration (OSHA) for 15 health violations. The company’s projected fines total $126,700. The violations were detected by OSHA following a complaint stating that workers were not provided with adequate protective equipment and were being exposed lead. ...


    By EMSL Analytical, Inc.

  • New Micro-Volume Probes from Jenway Allow Analysis of Samples as Small as 150µl

    New micro-volume probes from Jenway are designed for the accurate and reliable measurement of solutions in volumes as low as 150µl.  The micro-volume probes are available in two variants - the 4mm probe with a 120mm reach and the 6mm probe has a 180mm reach. The specific designs of each of the probes ensure their suitability for use in test tubes and small vessels, while ...


  • Ocean research drives growth for SEAL Analytical

    Business is booming in the UK for SEAL Analytical, the manufacturer of the AA3HR and QuAAtro automated segmented flow laboratory analyzers. Explaining the recent upturn in business, EMEA Sales Manager Haydon Warner says: “Automated testing of large numbers of samples at very low levels of analysis has been the main driver. Our team of application chemists and engineers are constantly ...


    By SEAL Analytical, Inc.

  • ASTM E815 - 11 standard test method for determination of calcium fluoride in fluorspar by Complexometric Titrimetry

    Fluorspar is used as a flux in steelmaking, glass industry, and manufacture of hydrofluoric acid. This test method is intended to be used for compliance with compositional specifications for calcium fluoride content. It is assumed that all who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be ...


    By ASTM International

  • Adam’s Nimbus range – balances for all applications from factories to labs…

    With their compact footprint and easy operation, Adam Equipment’s Nimbus range of analytical and precision balances are designed for discerning users in all fields. The Nimbus series offers readabilities from 0.1mg to 0.1g and ...


    By Camlab Limited

  • Erionite testing recommended to prevent human exposure

    Erionite is a naturally occurring fibrous mineral. Erionite exhibits similar properties to asbestos and according to some reports may be associated with lung diseases and deadly lung cancers, such as Mesothelioma. It is usually found in volcanic ash that has been altered by water and weather and its color varies from clear to white and its fibers appear glass-like.The U.S. Environmental ...


  • Biosafety Labs And The Meaning Of Biosafety Levels

    A biosafety lab is a specialized research laboratory that deals with infectious agents. Some are designed for research, while others are performing some kind of production activity, but proper protection is of the utmost importance for the safety of everyone working in and around a biosafety lab. Protection is not only important for those working in a building with a biosafety lab, but also for ...


    By Camfil Ltd

  • Center for medical science chemical kill system

    Practical Applications, Inc. (PAI), a leading environmental company, recently commissioned the chemical/biological decontamination system (chemical kill system) at the Center For Medical Science in Albany, NY. The Practical Applications, Inc. (PAI) Model# 1792 Chemical Kill System is designed to chemically treat waste water generated by the Center for Medical Science (CMS) laboratory prior to ...


    By Practical Applications, Inc.

  • Stuart’s new heating blocks ensure safe, effective heating for round bottom flasks

    Stuart Equipment has introduced a new range of heating blocks designed as accessories for the company’s Undergrad range of hotplates and hotplate stirrers. Developed along with Drysyn, a leading supplier of heating blocks, the new Stuart products enable customers to effectively turn their hotplate into a ...


    By Camlab Limited

  • CVD Acquires Assets of Tantaline A/S

    CVD Equipment Corporation (NASDAQ: CVV), a leading provider of chemical vapor deposition systems, has purchased certain assets (including all of the IP) formerly owned by Tantaline A/S of Nordborg, Denmark through our wholly owned subsidiary, CVD Materials Corporation. Formed in 2007, as a spin off from The Danfoss Group, ...


    By CVD Equipment Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you