granulator mill News

  • Universal edge strip granulator

    Cast films and plastic-coated paper sheeting are confectioned by cutting off both of the sheeting edge strips. Irregularities relating to production are thereby eliminated and consistent thickness over the entire width of the sheeting guaranteed. The continuous strips that arise are cut into short pieces with the RC 180 from Hellweg Maschinenbau GmbH & Co. KG, Roetgen. These cuttings can then be ...

  • “Slotter” – low dust granulation

    Untitled Document Low dust granulation of sprues and rejected parts is often a decisive quality aspect for the return of ground material to the production process. The new Slotter ("Slow Cutter") roll ...

  • “Slotter” – low dust granulation

    Low dust granulation of sprues and rejected parts is often a decisive quality aspect for the return of ground material to the production process. The new Slotter (“Slow Cutter”) roll mills from Hellweg Maschinenbau GmbH & Co. KG work without the use of sieves and at a low speed of just 25 r.p.m., so that gentle granulation without thermal degradation, faster delivery of granulate and ...

  • Reliable conveying of abrasive granulates with Mettler-Toledo Garvens

    Manufacturers of fine granulates, crystals and powders no longer have to be plagued by the ingress of particles into production line machinery with the launch of Mettler-Toledo Garvens’ Granulate Conveyor for checkweighers. Developed to reduce downtime and maintenance costs inherent with cleaning particle contamination, the new Granulate Conveyor features a unique covered design to protect ...


    By Mettler - Toledo Int. Inc

  • New Mega Mills for large and heavy parts

    Hellweg Maschinenbau GmbH & Co. KG presented at FAKUMA 2005 the new 600 series granulator ('Mega Mill') for the first time. The new granulators round off the product range at the top end. They are characterised by the extremely high stability of the entire machine housing. The high moment of gyration of the rotor, that is machined out of one ...

  • Pin Mill Controls Particle Sizes, Cleans Rapidly

    A new 24-inch (610 mm) diameter Pin Mill model CIM-24-MS from Munson Machinery grinds, sizes, de-agglomerates and homogenizes friable or other materials into controlled particle sizes, from coarse to fine (400 mesh). Also known as a Centrifugal Impact Mill, it is equipped with a stationary outer disc and a rotating inner disc, both ...

  • Fote New Sawdust Pellet Mill/Sawdust Pellet Mill/Sawdust Pellet Making Machine

    Fote New Sawdust Pellet Mill, Sawdust Pellet Mill, Sawdust Pellet Making MachineBrief Introduction to Sawdust Pellet Mill ...

  • Granutech-Saturn Systems launches Next Generation Refiner Mill for crumb rubber

    Granutech-Saturn Systems launches Next Generation Refiner Mill for crumb rubber delivering increased production, finer powder and first-to-market ‘grease-free’ sealed roller bearing design. Granutech-Saturn Systems, a world-leading manufacturer of the Saturn brand of industrial and mobile shredders, launched a revolutionary new design refiner mill for scrap rubber, featuring sealed ...


    By Granutech-Saturn Systems

  • Central grinding - simple, fast, quiet

    Untitled Document Hellweg Maschinenbau GmbH & Co. KG is presenting its 260 series of ...

  • Stedman`s Grand Slam™ Model 3030H Impactor Reduces Plastic Molded Parts

    Aurora, IN - The Grand Slam™ Model 3030H from Stedman efficiently reduces large pieces of rejected plastic molded parts to an ideal feed size for the granulator. After the granulator, material is then ready to be recycled and re-melted. Originally the large pieces of plastics were sized for the granulator by a band saw. The Model 3030H handles feed sizes up to 25” x 18” x 9” and features an ...


    By Stedman

  • New machine processes steel wire from tyre recycling

    Tyre wire cleaner made by MeWa separates steel and rubber. Around 3.5 million old tyres are returned for recycling every year in the European Union. A large proportion of these tyres are used to make rubber granulates. However, tyres also contain a substantial amount of steel wire. For this content, MeWa Recycling Maschinen und Anlagenbau GmbH from Gechingen has now developed the UNI-CUT® SP tyre ...


    By ANDRITZ MeWa GmbH

  • Testing PET preforms for consumer safety

    The CryoMill is the ideal tool to grind PET preforms quickly and reproducibly down to sizes of 100 microns and less for subsequent testing on formaldehyde. Formaldehyde is a chemical widely used in the industrial production of materials like plastics, for the processing of fabrics or to preserve biological materials. However, formaldehyde is considered by many standards to be a health hazard. It ...

  • Spare Parts

    Screw Conditioner Conditioner is in fact a screw blender where additives such as steam and other liquids can be added to the material mixture prior to entering the pelletizing chamber. Conditioner plays important roles as the following reasons: 1. Lubricate the material for faster production rate and reducing energy cost. 2. To extend die life by avoiding ...


    By Allance Pellet Machinery

  • MeWa supplies recycling line for scrap tyres to South Korea

    Tyre wire cleaner recycles steel tyre cord The South Korean company Anothen WTE (waste to energy) is involved in the entire rubber raw material cycle, from the manufacture of new tyres to recycling used ones. MeWa Recycling Maschinen und Anlagenbau GmbH, based in Gechingen/Germany, has now supplied a new shredding line for scrap tyres to the company's facility in Geumsan. The UNI-CUT ...


    By ANDRITZ MeWa GmbH

  • Customer application report: Aero Pump GmbH / Hochheim

    Quality assured sprue grinding for high grade applications Aero Pump GmbH has been producing high grade dosing and atomiser systems for almost 30 years in Hochheim am Main (photo 1). This includes in particular atomiser systems for dosing without propellant gas, for example for nose sprays, such as e.g. the patented 3K system, that guarantees protection against contamination, prevention of ...

  • Largest waste treatment operation in Austria relies on UNTHA shredding technology

    Since 1 July 2007, Salzburger Abfallbeseitigung GmbH has been working with the XR2000S shredder made by UNTHA.SAB processes 120,000 t of waste per year. Shredders of the highest reliability are needed to process such huge amounts of waste.After 25 years of experience with hammer mills, a hydraulic double rotor machine and two diesel-hydraulic 1-shaft machines were bought in the last thre ...


    By UNTHA Shredding Technology

  • Granutech Selects the MSA Group as South and Central America Distribution Partner

    Granutech-Saturn Systems, a world-leading manufacturer of industrial shredders and other recycling equipment based in Texas, USA announced that it recently appointed the MSA Group’s Recycling Division based in Bogota, Colombia with regional Offices in Brazil, as its exclusive distributor for Central & South America (excluding Mexico) The MSA Group will be representing Granutech’s ...


    By Granutech-Saturn Systems

  • New at LINDNER – Impact Crusher for Biogas Plants

    In recent years numerous researches for the improvement of biogas plants have been made. Most of them were aiming a higher gas yield and a better quality of gas in order to use it in existing gas networks. Also the reduction of the running costs of mixers and pumps as well as the prevention of floating layers have always been topics to be improved. Last but not least the researches focused on ...


    By Lindner-Recyclingtech GmbH

  • Granutech-Saturn announces acquisition of Magnatech hammermill line to enhance its Saturn® industrial shredder portfolio for non-ferrous applications

    Granutech-Saturn Systems, a world-leading manufacturer of the Saturn brand of industrial and mobile shredders announced today it has acquired a comprehensive line of industrial hammermills and ringmills, formerly marketed under the Magnatech brand. “In line with our history of strategic acquisitions, the long established and proven Magnatech Engineering line of hammermills provides us with ...


    By Granutech-Saturn Systems

  • Tirex remains optimistic for its technologies future

    The Tirex Corporation (TXMC: OTCBB) - owner of a patented tire recycling technology, called the TCS System – announced today that its Joint Venture Agreement with Wyoming Corporate Headquarters LLC (WCH) of West Columbia, SC, to recycle scrap tires in Tennessee, announced in January 2012, remains in good standing. ”While the financing needed to support the conditions of tire ...


    By The Tirex Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you