h2s gas detection News

  • Hot Off The Press: H2s And Ammonia Detection

    While toxic gases have a wide variety of uses in a range of industries, they can be very dangerous at high concentrations. In particular, ammonia is an excellent coolant used in food production and storage, and an efficient fertilizer in the agriculture industry. Additionally, H2S is an inevitable byproduct within the oil and gas industry, pulp and paper production and more. Human senses cannot ...


    By Spectrex Inc

  • Crowcon’s Gas-Pro PID Protects Workers from VOCs and H2S

    Crowcon’s new Gas-Pro PID portable gas detector, part of the popular Gas-Pro range, detects a wide range of volatile organic compounds (VOCs) found in many industrial applications. VOCs are not only highly flammable, they also pose a significant toxic hazard at very low concentrations – well below the lower explosive limit (LEL) of the VOCs. H2S, also detected by PID, is likewise ...

  • Crowcon’s Gasman Diving portable gas detector protecting divers from H2S gas in diving bells

    Crowcon’s Gasman Diving H2S personal gas detector is protecting divers in the North Sea by monitoring hydrogen sulphide (H2S) gas in diving bells. The diving industry has long been aware of the danger of H2S on subsea worksites and the danger of it getting into the diving bell. The severity of the problem varies worldwide and is particularly bad in waters which have effectively been used as ...

  • Visiting Safety & Health Expo 2013? See a1-cbiss @ Stand H2

    Wednesday, March 27, 2013 What: Safety & Health Expo 2013 When: 14th - 16th May Where: NEC, Birmingham, Stand H2 Are looking to attend the Safety & Health Expo at the NEC in Birmingham for information surrounding gas detection? Whether you have a gas detection requirement or are just looking to see what's new then a visit to a1-cbiss at Stand H2 is a must. ...


    By a1-cbiss

  • RAE Systems Introduces First Wireless, 4-Gas Pumped and Diffusion Monitor For Real-time Industrial, Oil & Gas and Emergency Response Gas Detection

    RAE Systems Inc., the leader in wirelessly connected gas and radiation detection solutions, today introduced the industry’s first wireless, portable, 4-gas pumped and diffusion gas monitor that will significantly enhance worker safety in industrial environments and better protect first responders. RAE Systems’ new QRAE 3 is a versatile, rugged, one- to four-sensor gas monitor that ...


    By CitiSafe Pte Ltd

  • Always know what is going on in your plant: Gas detection system Statox 505 - SIL 2 standard

    Reliability, feedback included The Statox 505 is a 4 – 20 mA transmitter for toxic gases and oxygen. It complements the Compur portfolio of fixed gas detectors. With this new development Compur responds to an increasing demand for SIL standard gas detectors, mainly from the chemical and petrochemical industry. Typical for Compur Monitors, they did not base their statistics ...

  • Extractive solution for measuring gas

    The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during installation. LaserGas R2P is optimized for extractive measurements in controlled environments. These kinds of measurements are typically used within chemical industry, petrochemical industry, ...


    By NEO Monitors AS

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • T3 portable multi-gas detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the scope of the T3 ...

  • Gas alarm system protects waste treatment staff

    The human nose is particularly sensitive to Hydrogen Sulphide (H2S); a highly offensive odorous gas, reminiscent of rotten eggs. With an odour threshold between 0.005 ppm and 1.5ppm, relatively low levels of Hydrogen Sulphide can result in complaints if industrial plants generate exposure at these levels. A chemical waste treatment plant in the UK has therefore installed a monitoring and alarm ...


    By Air Monitors Ltd.

  • ET Launches AirSense GDA2 Gas Detector For Toxic Gases

    ET continues to lead the way in the field of indoor air quality monitoring and gas detection with the introduction of the AirSense Analytics (Germany) GDA2 gas detector toxic gases and chemical agents. Aimed primarily at the 'emegency response teams' and 'first responders' the GDA2 uses a unique 'array' of sensor technology to identify up to 750 toxic gases including chemical warfare agents such ...

  • The “space-saver” FID Station gas generator from LNI Swissgas

    LNI Swissgas / Switzerland is proud to announce the launch of a 2nd new product for 2015. The FID Station plus is an all-in-one generator for both hydrogen grade 6.0 and a Zero Air dedicated to GC-FID analytical devices. Main unique benefits of this dual generator are first, to avoid analytical background noise, allowing very low detection levels of a FID system and for CARRIER GAS applications, ...


    By LNI Swissgas

  • Net safety monitoring flame and gas detectors receive SIL2 qualification

    Net Safety Monitoring is pleased to announce that our entire UV/IR flame detection line has received qualification as SIL2 devices by exida® and that our Phoenix Triple IR Flame Detector and our Millennium II Single and Multi-Channel Gas Detector have attained SIL2 qualification by TÜV SÜD for use in a high demand, or continuous mode of operation. The Net Safety Ultraviolet/Infrared flame ...


  • New Tango TX1 Gas Detector Available from a1-cbiss

    Industrial Scientific Introduces the Tango™ TX1 Single Gas Monitor, Now Available From a1-cbiss The Tango TX1 with DualSense Technology ensures that users will be significantly safer with the Tango than with any other single gas instrument on the market today.* ...


    By a1-cbiss

  • Det-Tronics gt3000 toxic gas detector family receives atex approval

    Minneapolis, MN (May 4, 2010) — Detector Electronics Corporation (Det-Tronics) GT3000 Toxic Gas Detectors have received ATEX hazardous location and performance certification (http://gt3000.det-tronics.com). In addition, GT3000 Toxic Gas Detectors are FM, CSA, CE, and IECEx certified and have earned the IP66 rating. Det-Tronics is part of UTC Fire & Security, ...

  • Crowcon ‘Clip’ and ‘Clip+’ single gas fixed-life monitors deliver compliance

    The new Crowcon Clip and Clip+ single gas monitors are simple to use and designed with one thing in mind: compliance with regulations and company procedures in the oil and gas industry. Intended for use in hazardous areas, they offer reliable and durable fixed life monitoring in a compact, lightweight and maintenance-free package. Application focused innovations allow hibernation, deliver ...

  • Crowcon’s Tetra 3 Portable Gas Detector used by BBC film crew on Indonesian Volcano

    Tetra 3 used to detect hydrogen sulphide gas in volcano’s crater A BBC film crew filming sulphur miners in the crater of an active volcano used a Crowcon Tetra 3 portable gas detector to warn them of dangerous levels of hydrogen sulphide (H2S). The crew were filming in Indonesia as part of the BBC’s landmark ‘Human Planet’ series which explores mankind’s relationship ...

  • Crowcon Expands Capabilities of its Lightweight, Intrinsically Safe T3 Portable Multi-Gas Detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the applications for ...

  • Det-Tronics Adds IP66/67 Approval to Existing Ultra-Fast Hydrogen Sulfide Gas Detector

    Detector Electronics Corporation (Det-Tronics), a world leader in industrial fire detection, gas detection, and hazard mitigation systems, announces that its Nanotechnology Metal Oxide Semiconductor hydrogen sulfide gas (NTMOS H2S) detector has earned approval for use in locations that require an ingress protection rating of IP66/67, ideal for petrochemical, oil and gas applications ( ...

  • Senscient ELDS(TM) Version 1.2 Open Path Gas Detectors Are First With Wireless 2.4 GHz Access and Data Communications

    An industry first, Senscient's new ELDS Version 1.2 Open Path Gas Detectors (OPGDs) feature Integrated 2.4 GHz Wireless Communications between the ELDS Transmitters/Receivers and Senscient Install & Commissioning tools. No other OPGD is as easy to install, with 2.4 GHz wireless alignment & access to event logs, self check results, and system diagnostics. This eliminates hard-wired Class I ...


    By Senscient Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you