h2s sensor News

  • Landfill gas H2S increase measured with high-range analysers

    Hydrogen sulphide levels (H2S) in landfill gas have increased and Geotech has responded to changes reported by landfill site operators by now offering analysers measuring H2S up to 10,000 ppm. Rapidly rising H2S levels are thought to be caused by waste-to-landfill content changing largely as a result of success in recycling and other initiatives to avoid sending waste to landfill. Previously, H2S ...


    By Geotech

  • Biogas analyser enhanced with multi-sample points and low-to-high range H2S

    The latest static biogas analyser for Geotech, the GA3000 PLUS, can now optionally monitor up to three sample points and hydrogen sulphide (H2S) ranging from 50 to 10,000 ppm. As before, it analyses methane (CH4), carbon dioxide (CO2) and oxygen (O2). The new developments, as options, enhance the already widely used ATEX Zone 2 certified ...


    By Geotech

  • World’s smallest and most convenient hydrogen sulfide detector and alarm released

    KWJ Engineering has released its new Pocket H2S Pro, a key-fob sized, personal hydrogen sulfide detector that weighs less than one ounce. The nanotechnology-enabled instrument protects from low-level and high-level exposure to H2S, and gives real-time Time Weighted Average, Maximum, and Total Exposure readings. The Pocket H2S Pro also features 3 alarm types, a replaceable coin cell battery, and ...


    By KWJ Engineering, Inc.

  • The Complete Portable Industrial Combustion Gas & Emissions Analyzer

    The NEW E8500 combustion analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing.  The E8500 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. The  E8500 Also Includes: Electrochemical Sensors - 02/ CO, NO, N02/ S02, H2S NDIR Sensors - ...

  • ET Launches AirSense GDA2 Gas Detector For Toxic Gases

    ET continues to lead the way in the field of indoor air quality monitoring and gas detection with the introduction of the AirSense Analytics (Germany) GDA2 gas detector toxic gases and chemical agents. Aimed primarily at the 'emegency response teams' and 'first responders' the GDA2 uses a unique 'array' of sensor technology to identify up to 750 toxic gases including chemical warfare agents such ...

  • NEW E8500 PLUS Portable Emissions Analyzer

    The NEW E8500 PLUS emissions analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing. The E8500 PLUS is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. NEW Features: Upgraded Software with Automatic Data-Logging NEW PID VOC Sensor Option NEW ...

  • The Complete Portable Industrial Combustion Gas & Emissions Analyzer

    The NEW E8500 combustion analyzer is a complete portable tool for EPA compliance level emissions monitoring and testing.  The E8500 is ideal for regulatory & maintenance use in boiler, burner, engine, turbine, furnace, and other combustion applications. The E8500 Also Includes: Wireless Communications with Computer & other Windows Devices Up to Nine Gas Sensors ...

  • Equipment Hire - GA2000

    The GA2000 is the standard 5 gas analyser within the STL Equipment Hire fleet. This infra-red Gas Analyser is suitable for use in regulatory Landfill monitoring investigations for the detection and measurement of Methane, CO2 and Oxygen. The analyser also has built-in sensors for the detection and measurement of Toxic gases CO and H2S. Benefits Simultaneous readings of all gases on ...


  • Wet well analysis for methane, oxygen and hydrogen sulfide

    ENMET’s Wet Well Monitoring System is specifically designed for monitoring Methane (CH4), Oxygen (O2) and Hydrogen Sulfide (H2S) in a hazardous wastewater treatment plant environment.  The system incorporates the CP-60 controller with 3 remote 4-20 mA/24 VDC sensor/transmitters in Explosionproof Class I Div 1, Group B, C and D enclosures.  The CP-60 controller provides 24 VDC ...


    By ENMET, LLC

  • Bump testing doesn’t have to be a headache

    There are many reasons why a portable gas detector may not to react to gas, some of which may not be evident to the user. The safest way to make sure a gas monitor is working at its optimum is to regularly test the unit. This is known as a gas or ‘bump’ test. The following scenario highlights the importance of bump testing: Peter works at a local oil refinery and arrives on site in ...

  • ATi’s Dissolved Hydrogen Sulphide Monitor Achieves Accurate Hydrogen Sulphide Measurements in Water

    Analytical Technology Inc. (ATi) announces that its A15/81 dissolved hydrogen sulphide monitor is the first system to achieve precise and direct measurements of hydrogen sulphide levels in water. The analyser provides continuous, accurate and sensitive measurements of true dissolved sulphide levels whilst requiring very little maintenance due to non-contact gas phase measurement. The A15/81 ...


  • T3 portable multi-gas detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the scope of the T3 ...

  • Crowcon Expands Capabilities of its Lightweight, Intrinsically Safe T3 Portable Multi-Gas Detector

    Gas detection specialist Crowcon has expanded the capabilities of its highly successful Tetra:3 (T3) personal multi-gas detector with three more toxic gas sensors: ozone (O3), sulphur dioxide (SO2) and ammonia (NH3). This complements the existing sensor range which includes flammable gases, oxygen (O2), hydrogen sulphide (H2S), and carbon monoxide (CO). The new sensors widen the applications for ...

  • ABLE Jerome is equipment of choice for EA Incident Response Teams

    During the Buncefield incident in Hertfordshire in 2005, it was established that there was no coordinated response to potentially adverse air quality incidents. As a result, the Department for Environment, Food, and Rural Affairs asked the Environment Agency to lead a coordinated monitoring and modeling response with the Met Office, Health Protection Agency, Public Health Wales, Health & ...

  • Det-Tronics gt3000 toxic gas detector family receives atex approval

    Minneapolis, MN (May 4, 2010) — Detector Electronics Corporation (Det-Tronics) GT3000 Toxic Gas Detectors have received ATEX hazardous location and performance certification (http://gt3000.det-tronics.com). In addition, GT3000 Toxic Gas Detectors are FM, CSA, CE, and IECEx certified and have earned the IP66 rating. Det-Tronics is part of UTC Fire & Security, ...

  • Don`t waste the waste

    Biogas analysis cannot be underestimated: get it right and protect revenues, get it wrong and those revenues will quickly plummet There is no denying that biogas is valuable. It may not be the most pleasant material to handle — hot, wet, dirty, smelly, corrosive, toxic — but handled correctly, it is worth a lot of money to whomever is producing it. Encouraged, subsidised, ...


    By Geotech

  • Always know what is going on in your plant: Gas detection system Statox 505 - SIL 2 standard

    Reliability, feedback included The Statox 505 is a 4 – 20 mA transmitter for toxic gases and oxygen. It complements the Compur portfolio of fixed gas detectors. With this new development Compur responds to an increasing demand for SIL standard gas detectors, mainly from the chemical and petrochemical industry. Typical for Compur Monitors, they did not base their statistics ...

  • The “space-saver” FID Station gas generator from LNI Swissgas

    LNI Swissgas / Switzerland is proud to announce the launch of a 2nd new product for 2015. The FID Station plus is an all-in-one generator for both hydrogen grade 6.0 and a Zero Air dedicated to GC-FID analytical devices. Main unique benefits of this dual generator are first, to avoid analytical background noise, allowing very low detection levels of a FID system and for CARRIER GAS applications, ...


    By LNI Swissgas

  • OdaLog Type 1 Phase Out

    App-tek have announced the phase out of their OdaLog Type 1 Hydrogen Sulphide Logger which means we will no longer stock consumables for the Type 1 nor can we service them. It's not all bad news though... From now until the end of September we will offer you £70 off the price of a new ...


    By a1-cbiss

  • Introducing Our NEW Quick Deploy (QD) H-Series Portable Weather Stations

    FTS is pleased to announce that we have expanded our product offering to include our Quick Deploy (QD) H-Series, specifically for our hydrological and meteorological markets. The QD H-Series can be supplied with a built-in H1RS or H2 datalogger or support interchanging of standalone H1RS or H2 dataloggers. All our QD’s ...


    By FTS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you