hazardous area atex News

  • ATEX UV disinfection for explosive atmospheres & hazardous areas

    From drilling decks and accommodation platforms, to upstream refineries, many oil, gas and petrochemical installations now require equipment to be installed in hazardous areas and ATEX classified zones.  Explosive atmospheres can be caused by any number of flammable gases, mists, vapours and combustible dusts.  When a sufficient quantity of hazardous material is mixed with air, all that ...


    By atg UV Technology

  • ATEX UV Disinfection for Explosive Atmospheres & Hazardous Areas

    From drilling decks and accommodation platforms, to upstream refineries, many oil, gas and petrochemical installations now require equipment to be installed in hazardous areas and ATEX classified zones. Explosive atmospheres can be caused by any number of flammable gases, mists, vapours and combustible dusts. When a sufficient quantity of hazardous material is mixed with air, all that is needed ...


    By atg UV Technology

  • New ATEX certificates

    Progressing cavity pumps, peristaltic pumps, and macerators are also certified for use in dusty atmospheres, the ALLTRIMM series is also ATEX compliant. For many years progressing cavity pumps, peristaltic pumps, and mac-erators manufactured by ALLWEILER AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres. But now - since mid-2008 -they are also certified for ...


    By ALLWEILER GmbH

  • TVOC ATEX certified for zone 2 areas without safety barriers

    Ion Science introduces the ATEX approved 3 wire TVOC monitor, for use without safety barriers in Zone 2 hazardous areas. The ATEX certified TVOC (Total Volatile Organic Compound) monitor can be installed without barriers in a Zone 2 area, to directly replace an existing photoionisation detector (PID). A significant benefit to the customer is the instrument’s easy installation; saving time and ...


    By Ion Science

  • TVOC ATEX certified for zone 2 areas without safety barriers

    Ion Science introduces the ATEX approved 3 wire TVOC monitor, for use without safety barriers in Zone 2 hazardous areas.The ATEX certified TVOC (Total Volatile Organic Compound) monitor can be installed without barriers in a Zone 2 area, to directly replace an existing photoionisation detector (PID). A significant benefit to the customer is the instrument’s easy installation; saving time and ...


    By Ion Science

  • Include hazardous and non-hazardous areas in your safety system

    Improve efficiency and safety by using a single safety system for two types of areas: non-hazardous (control rooms and living quarters) and classified/hazardous (process areas). Det-Tronics’ newly released Addressable Smoke and Heat (ASH) Module expands the reach ...

  • Valvekits to stock Soldo hazardous area switchboxes

    Rotork Valvekits, Rotork’s specialist valve mounting kit company, is now the UK stockist for Soldo switchboxes. Soldo is a highly regarded manufacturer of compact switchboxes featuring a range of switch options with local visual position indication for rotary quarter-turn pneumatic actuators. Rotork Valvekits will predominantly stock Soldo switchboxes for hazardous area applications, ...


    By Rotork

  • DESMI Ocean Guard receives ATEX certification

    DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its RayClean-EX ballast water treatment system. This means the system can now be installed directly in hazardous areas onboard tanker vessels. DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its ...


    By DESMI A/S

  • Chromatotec® certified ATEX for zone 1 & 2

    Since 2009, Chromatotec® proposes a version of its MEDOR® analyzer in Exp cabinet for hazardous areas. This solution dedicated for monitoring and online analysis of sulfurs and odorous compounds in natural gas today received the ATEX certification for zone 1. MEDOR® was already certified for zone 2 since 2014. The ATEX directive consists of two EU directives describing what equipment ...


    By Chromatotec Group

  • Allweiler Pumps approved for explosive atmospheres. New ATEX certificate for dust

    For many years progressing cavity pumps, peristaltic pumps, and macerators manufactured by Allweiler AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres when used properly. But now – since end 2008 – they are also certified for use in dust-laden explosive atmospheres. The ATEX certificate confirms that Allweiler pumps now fully comply with EU directive 94/9/EC ...


    By ALLWEILER GmbH

  • Det-tronics introduces addressable smoke and heat detection for non-hazardous areas

    Detector Electronics Corporation (Det-Tronics) has introduced its Addressable Smoke and Heat (ASH) Module (http://safety.det-tronics.com). The ASH Module is an interface device that manages inputs/outputs between the Eagle Quantum Premier® (EQP) Safety System and devices in non-hazardous areas, such as living quarters and control rooms. Det-Tronics is a business of ...

  • Rotork Schischek launches controller for decentralised control structures in industrial and hazardous areas

    More and more applications in the industrial and hazardous area building automation sector require high performance and easy to use control systems. The local control of variable air volume (VAV) and constant air volume (CAV) systems as well as pressure, temperature and humidity eliminates the need for connection to remote controllers. Air volume control is the key to delivering cost effective ...


    By Rotork

  • Complete range of Soldo safe and hazardous area switchboxes now in stock at Valvekits

    Valvekits, Rotork's specialist valve mounting kit company, has completed its off-the-shelf offering of Soldo switchboxes for quarter-turn actuators and valves by adding the safe area SP range to the hazardous area Soldo ranges that it already holds. The compact, economical and corrosion resistant Soldo SP range is designed for valve and damper applications requiring waterproof environmental ...


    By Rotork

  • Det-Tronics Introduces Addressable Smoke and Heat Detection for Non-Hazardous Areas

    Detector Electronics Corporation (Det-Tronics) has introduced its Addressable Smoke and Heat (ASH) Module (http://safety.det-tronics.com). The ASH Module is an interface device that manages inputs/outputs between the ...

  • Det-Tronics gt3000 toxic gas detector family receives atex approval

    Minneapolis, MN (May 4, 2010) — Detector Electronics Corporation (Det-Tronics) GT3000 Toxic Gas Detectors have received ATEX hazardous location and performance certification (http://gt3000.det-tronics.com). In addition, GT3000 Toxic Gas Detectors are FM, CSA, CE, and IECEx certified and have earned the IP66 rating. Det-Tronics is part of UTC Fire & Security, ...

  • Can you put theory into practice when it comes to ATEX?

    21st to 22nd February 2007, National Motorcycle Museum, Birmingham HazardEx International 2007 – the only event to offer indispensable advice from the top authorities in the hazardous area industry, when complying with the ATEX, DSEAR + IECEx requirements – has announced it’s comprehensive two day conference programme to help you to put theory into practice with regards to the new regulations. ...


    By IML Group PLC

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • Casella ETI launch ATEX approved laser based monitoring systems

    Casella ETi has launched the U.K.'s first tuneable diode laser emissions monitoring system with ATEX approval for use in hazardous areas. Proven technology in cross duct analysis of continuous emissions monitoring from within stacks has been also been developed to enable ...


    By Casella

  • ATEX approval awarded for ABLE Xentaur XPDM Portable Dewpoint meter

    ABLE are pleased to announce the award of ATEX approval on their Xentaur XPDM Portable Dewpoint Meter, negating the need for hot work permits to be issued for use in hazardous areas.The portable meter is used for fast and precise spot checks of moisture in gasses over the range of minus 100oC to plus 20oC dewpoint. Aluminum oxide sensors adsorb much faster than they desorb water molecules. It is ...

  • P S Analytical achieves ISO 9001:2000 and ATEX Certification

    Following an assessment by an independent body, P S Analytical has been awarded ISO 9001 certification.  This certification has only been achieved by about 5% of UK businesses and this prestigious award is supported by the Government and recognised worldwide. Said a delighted Prof Peter Stockwell “We have always been proud of the service we offer our clients and the way that we conduct our ...


    By P S Analytical Limited

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you