heat meter assemblies News

  • Berkeley researchers find new route to nano self-assembly

    If the promise of nanotechnology is to be fulfilled, nanoparticles will have to be able to make something of themselves. An important advance towards this goal has been achieved by researchers with the U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) who have found a simple and yet powerfully robust way to induce nanoparticles to assemble themselves into complex ...

  • Air Products Celebrates Manufacturing of 100th LNG Heat Exchanger

     Adorned with a banner appropriately marking the milestone occasion, Air Products' (NYSE: APD) employees at its Wilkes-Barre, Pennsylvania manufacturing facility said bon voyage to the shipment of its 100th coil wound heat exchanger today. This Air Products proprietary and industry leading technology, vital to helping meet the world's increasing energy needs and desire for clean energy, is ...


    By Air Products

  • ENER-G acquires second Hungarian enterprise

    Sustainable energy technology company ENER-G plc has acquired a second Hungarian business for an undisclosed sum.ENER-G has taken a 100% stake in Budapest’s Kipszer Klima Controll, a supplier of air-conditioning, heating and specialist clean air technology systems to a broad customer base in central and northern Europe, including the Hungarian Parliament building, Egis, GSK, Richter Gedeon, ...


    By ENER-G

  • Sewage Treatment Plant in Vienna Decides on Flottweg Decanters

    As part of a Europe-wide call for tenders, Flottweg was awarded a contract from the ebswien main sewage treatment facility for five model Z92 decanter centrifuges. The total order volume is over three million Euros. The main sewage treatment plant in Vienna will be equipped with five Flottweg Decanters. "E_OS – Energie_Optimierung-Schlammbehandlung" (energy optimization and sludge ...


    By Flottweg SE

  • Dürr campus dedicates new modern working environment to 1,500 employees

    In the presence of Baden-Württemberg's minister president, Günther Oettinger, and 200 guests, Dürr has dedicated its new headquarters in Bietigheim-Bissingen today. The Dürr Campus stands for open communication, efficient operational processes, and an energy-saving approach to resources. About 1,500 people are employed at the site, of whom about 900 moved there a few weeks ago from the company's ...

  • Schott closes CSP deal with Rioglass Solar; Abengoa sells more assets

    Schott sells CSP business to Rioglass Solar SCHOTT has closed the sale of its CSP business to Rioglass Solar, the company announced in a statement April 14. The buyer, Spanish Rioglass Solar, has acquired the production facility in Aznalcollar near Seville and also a large part of SCHOTT’s CSP assets located in Mitterteich, Germany. SCHOTT will continue ...


    By FCBI Energy

  • BC to fund clean energy projects

    The Government of British Columbia has announced funding allocations for a diverse array of clean energy technology development applications under the Province’s Innovative Clean Energy (ICE) Fund. The ICE funding will be used to lever investments totalling nearly $80 million. The $25 million in funding was announced by newly appointed Technology, Trade and Economic Development ...


    By GLOBE Foundation

  • ASTM C1631-08 standard specification for cellular polypropylene thermal insulation

    This specification covers the types, physical properties, and dimensions of cellular polypropylene intended for use as thermal insulation for temperatures from - 150 to + 240°F (-101 to + 116°C). Formerly under the jurisdiction of Committee C16 on Thermal Insulation, this specification was withdrawn in October 2011, because the product is no longer manufactured or sold. 1. ...


    By ASTM International

  • ASTM E84 - 12 Standard Test Method for Surface Burning Characteristics of Building Materials

    This test method is intended to provide only comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions described herein. This test method exposes a nominal 24-ft (7.32-m) long by 20-in. (508-mm) wide specimen to a ...


    By ASTM International

  • ASTM C726 - 11 standard specification for mineral wool roof insulation board

    This specification covers the composition and physical properties of mineral fiber insulation board used above structural roof decks as a base for built-up roofing and single ply membrane systems in building construction. The use of thermal insulation materials covered by this specification may be regulated by building codes or other agencies that address fire performance, or both. ...


    By ASTM International

  • ASTM E84 - 11b standard test method for surface burning characteristics of building materials

    This test method is intended to provide only comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fiber-cement board surfaces under the specific fire exposure conditions described herein. This test method exposes a nominal 24-ft (7.32-m) long by 20-in. (508-mm) wide specimen to a controlled air flow and flaming fire exposure ...


    By ASTM International

  • ASTM C1482 - 11 standard specification for polyimide flexible cellular thermal and sound absorbing insulation

    This specification covers the composition and physical properties of lightweight, flexible open-cell polyimide foam insulation intended for use as thermal and sound-absorbing insulation for a certain temperature range in commercial and industrial environments. The insulations are classified into the following types: Types I, II, III, IV, V, and VI. Polyimide foam shall be manufactured from the ...


    By ASTM International

  • Davey puts energy saving at heart of strategy

    A new offensive on cutting energy waste was launched by Edward Davey today, with the creation of a dedicated team within DECC assembled to spearhead energy efficiency policy and make it more relevant to people’s everyday lives. The Energy and Climate Change Secretary today unveiled details of the new Energy Efficiency Deployment Office (EEDO) at a meeting with industry leaders at The John ...

  • Peristaltic Pumps Maximise Uptime and Eliminate Contamination

    Watson-Marlow Fluid Technology Group has supplied peristaltic pumps to Novasep for its Sius TFF Skid, a tangential flow filtration system used in the biopharmaceutical industry to separate and concentrate biomolecules according to their size. The new skid is the first on the market to offer a 100 per cent single-use TFF solution. Watson Marlow 520UN/R2 and 620UN/RE pumps were selected to ...

  • SkyFuel`s Parabolic Trough to Save Fuel in the Gas City

    SkyFuel, Inc. has been awarded a contract to supply high performance parabolic trough solar collectors to the City of Medicine Hat in Alberta, Canada to offset fuel consumption at the City's combined cycle gas power plant. The installation will be the first concentrating solar power project to ...


    By SkyFuel, Inc

  • Secretary Moniz Awards $125 Million for 41 Transformational Energy Technology Projects Ahead of COP21 in Paris

    U.S. Energy Secretary Ernest Moniz today announced $125 million across 41 cutting-edge energy technologies awarded by the Department of Energy’s (DOE) Advanced Research Projects Agency-Energy (ARPA-E). These new projects are funded under ARPA-E’s OPEN 2015 program and come in advance of the COP21 U.N. Climate Negotiations in Paris next week. The announcement was made at D.C. ...


    By US Department of Energy

  • Made in IBM Labs: Collaboration Aims to Harness the Energy of 2,000 Suns

    Today on Earth Day, scientists have announced a collaboration to develop an affordable photovoltaic system capable of concentrating solar radiation 2,000 times and converting 80 percent of the incoming radiation into useful energy. The system can also provide desalinated water and cool air in sunny, remote locations ...


    By IBM Corporation

  • ASTM E2751 - 11 standard practice for design and performance of supported glass walkways

    Glass is a brittle material with different time and temperature-dependent properties than other solid materials used as walkways surfaces. Therefore, the type of glass is an important consideration in the design and construction of glass treads and glass landings constructed with laminated glass. Post-breakage glass retention is an important consideration in ...


    By ASTM International

  • Intersolar North America Highlights Energy Storage, New Solar Technologies During Fifth Event in San Francisco

                SAN FRANCISCO, July 17, 2012 /PRNewswire/ -- Intersolar North America, the premier solar industry exhibition and conference in North America for solar professionals to exchange information and develop business opportunities in the U.S. solar market, concluded its ...

  • ITRI Wins R&D 100 Awards for Fifth Year in a Row

    ITRI (Industrial Technology Research Institute), Taiwan's largest and one of the world's leading high-tech research and development institutions, will accept six 2012 R&D 100 Awards in Orlando, Fla., on Nov. 1, 2012. ITRI was selected as a winner for the fifth consecutive year, collecting six awards for the following advanced technologies in their respective categories: Lignoxy?, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you