heated gas sampling probe News

  • Protea Heated Gas Sampling System

    For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation.  The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample ...


    By Protea Limited

  • New sample gas probe for operating temperatures up to 280°C

    In the process of extractive gas analysis, it is essential to stabilise the operating temperature of the sample stream above a certain level. If the sample gas would undercut these limits, acids could fall out or chemical reactions could take place, e.g. salt or other crystals may be formed. Unexpected acid condensate could increase the corrosive property of the gas or the precipitation of solids ...


    By Bühler Technologies GmbH

  • CEMTEC - Self-cleaning probe for cement plant kiln inlets

    CEMTEC provides many years of operation in cement kilns or in applications with high temperatures and/or high dust loads. The patented CEMTEC consists of a watercooled probe, which is mounted on a pneumatic propulsion device and travels in and out of the combustion process. In addition to the InSitu sensors for the instantaneous O2 and COe analysis, a heated gas ...


    By ENOTEC GmbH

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Gas Conditioning Made Easy

    The PGCS is a smart solution for stack testers looking to carry out frequent stack emission tests across different sites. Stack testing is a procedure carried out by engineers to determine the concentration of gas and dust emissions being released into our atmosphere. Stack emission testing must be carried out to ensure that sites are complying with environmental standards. The amount of stack ...


    By a1-cbiss

  • Syngas Cleaning Station for Gas Analysis

    Remove TAR , Dust & Water vapour Transportable with 3 refillable bubbler Inlet from process Hi-Temperature probe Peltier cooler with 1 heat exchanger Internal Sample pump Gas sample out dry @ 5 ⁰C Max Flow sample out 300 Nl/h Low cost of ownership Cooler maintenance free Universal uses in sampling gas ...


    By ETG Risorse e Tecnologia

  • One-touch analysis to guarantee high quality standards for welding gases with the AGC Veri-GAS analyser range

    These handheld gas analysers employ industry-leading components at their core combined with AGC’s cutting-edge engineering solutions and are specially designed for a range of sampling applications. With armored tubing and specialised filtration and flow-limiting devices utilised, these analysers perform straightforward, fast and accurate readings at the touch of a button. The ...


    By AGC Instruments Ltd.

  • Apex Instruments releases the XC-260 Meter Console for mercury emissions

    Apex Instruments proudly introduces the XC-260 Meter Console for mercury emissions based on U.S. EPA Appendix K of 40 CFR Part 75. This low-cost, portable, field-proven XC-260 Hg Audit System is designed for performance testing, base line studies, and profiling. With the XC-260 Hg Audit System you can manually collect gaseous mercury emissions over a period of several minutes to several hours. ...


    By Apex Instruments, Inc.

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • Thermo Fisher Scientific introduces the Thermo Scientific Model 60i Full-Extractive

    Thermo Fisher Scientific Inc., the world leader in serving science, today announced the new Thermo Scientific Model 60i, a full-extractive, multi-gas analyzer that features non-dispersive infrared (NDIR) optical filter technology to ensure accurate, precise measurement of up to six gases, including CO, CO2, NO, NO2, and SO2. The Model 60i also accommodates an optional O2 measurement capability ...

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • Unique Engine Analysis System Now Offered

    Environnement SA (France) now offer heated, turnkey, gas analysis systems which are very easy to use and perform fast, continuous and simultaneous measurement of NH3 and NOx in DeNOx applications. These systems are ideal for engines where SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) have been implemented. In DeNOx systems using urea injection with ammonia (NH3) ...


    By Environnement S.A

  • Manufacturers Find Cost-Efficient Ways to Meet Surging Demand

    Highland, Michigan – July 15, 2010 – Neptech, Inc., a leading provider in the emissions testing field, has expanded its scope of contract services at its Tech Center in Highland, Michigan.  The Neptech team is structured to support an expansive market – from original equipment manufacturers and suppliers to R&D labs and testing facilities throughout North America.  ...


    By Neptech Inc.

  • Learn More About the Art of Emissions Monitoring

    E Instruments is proud to present our newest report on the complex art of emissions monitoring and gas sampling. Every application encompasses different system considerations and there really is no “one-size-fits-all” approach to proper emissions monitoring. The purpose of this technical note is to provide an understanding of what types of equipment are needed for a wide range of ...

  • ORNL researchers win six R&D 100 awards

    Researchers at the US Department of Energy's (DOE) Oak Ridge National Laboratory (ORNL) have won six R&D 100 Awards for innovative technologies in areas ranging from national security to the advanced materials industry. 'This is yet the latest example of how the Department of Energy and our national laboratories are continuing to demonstrate world-class leadership in innovation, as we ...

  • NASA spacecraft confirms Martian water

    Laboratory tests aboard NASA's Phoenix Mars Lander have identified water in a soil sample. The lander's robotic arm delivered the sample Wednesday to an instrument that identifies vapors produced by the heating of samples. 'We have water,' said William Boynton of the University of Arizona, lead scientist for the Thermal and Evolved-Gas Analyzer, or TEGA. 'We've seen evidence for this water ice ...

  • Ametek introduces WDG-V Combustion Analyzer offering improved process and safety functions

    AMETEK Process Instruments, a leader in online analytical instrumentation, has introduced the next-generation in close-coupled extractive combustion analyzers with the launch of the Thermox WDG-V combustion analyzer for measuring oxygen, combustibles and methane levels in hot, wet flue gas. The WDG-V analyzer provides a ...

  • AQE 2015 a great success for ET!

    Leading air quality monitoring equipment specialist Enviro Technology Services Plc recently exhibited and presented at the AQE Exhibition & Conference in Telford. Occupying two stands in a prominent position near the exhibition hall entrance and with even more cutting-edge technology located in the central demonstration area, the company was able to showcase several new products as well as ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you