heated sample gas filter News

  • New high performance sample gas cooler

    Bühler Technologies, a leading manufacturer of high quality accessories and systems for the gas analysis, is introducing the PKE 52, a new series of high performance peltier coolers. Depending on the selected heat exchanger, the gas flow can go as high as 500l/h per single stream, or up to 2x 250 l/h per dual stream even under harsh ambient conditions. Analogue to the well known PKE 5 ...


    By Bühler Technologies GmbH

  • New sample gas probe for operating temperatures up to 280°C

    In the process of extractive gas analysis, it is essential to stabilise the operating temperature of the sample stream above a certain level. If the sample gas would undercut these limits, acids could fall out or chemical reactions could take place, e.g. salt or other crystals may be formed. Unexpected acid condensate could increase the corrosive property of the gas or the precipitation of solids ...


    By Bühler Technologies GmbH

  • Panasonic Begins Shipping Samples of New Catalyst for Diesel Exhaust Gas Purification

    Osaka, June 22, 2010 - (ACN Newswire) - Panasonic Corporation announced today it has succeeded in the development of a new catalyst using an alkali metal compound to decompose and purify particulate matter in diesel engine exhaust gas[1], and has begun shipping its samples this month. As diesel emission regulations have become increasingly stringent, particularly in Japan, the US, and Europe, ...


    By Japan Corporate News - JCN

  • New portable heated FID for stack testing

    The new OVF-3000 heated FID total hydrocarbon analyzer weighs only 11 kg including our new solid metal fuel gas storage was introduced late 2008. This FID complies with EN 12619 and EN 13526 for Europe, with TA-Luft, 2nd, 13th, and 17th BImSchV for Germany and with the EPA Methods 25A and 305 for the USA.As an attractive lower cost alternative to bigger and heavier heated FID analyzers of today's ...


    By J.U.M. Engineering GmbH

  • Extractive solution for measuring gas

    The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during installation. LaserGas R2P is optimized for extractive measurements in controlled environments. These kinds of measurements are typically used within chemical industry, petrochemical industry, ...


    By NEO Monitors AS

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Syngas Cleaning Station for Gas Analysis

    Remove TAR , Dust & Water vapour Transportable with 3 refillable bubbler Inlet from process Hi-Temperature probe Peltier cooler with 1 heat exchanger Internal Sample pump Gas sample out dry @ 5 ⁰C Max Flow sample out 300 Nl/h Low cost of ownership Cooler maintenance free Universal uses in sampling gas ...


    By ETG Risorse e Tecnologia

  • Genie membrane filters protect against Analyser Liquid damage

    When gas is extracted from a gas field, it requires processing before it can be sold. In the natural gas industries, one of the most important, yet difficult and challenging tasks for process engineering is measuring moisture in a multitude of process gases and liquids. Liquids and moisture will naturally make up a proportion of gas samples. In order to make the gas suitable for sale and use, the ...


    By a1-cbiss

  • One-touch analysis to guarantee high quality standards for welding gases with the AGC Veri-GAS analyser range

    These handheld gas analysers employ industry-leading components at their core combined with AGC’s cutting-edge engineering solutions and are specially designed for a range of sampling applications. With armored tubing and specialised filtration and flow-limiting devices utilised, these analysers perform straightforward, fast and accurate readings at the touch of a button. The ...


    By AGC Instruments Ltd.

  • CEMTEC - Self-cleaning probe for cement plant kiln inlets

    CEMTEC provides many years of operation in cement kilns or in applications with high temperatures and/or high dust loads. The patented CEMTEC consists of a watercooled probe, which is mounted on a pneumatic propulsion device and travels in and out of the combustion process. In addition to the InSitu sensors for the instantaneous O2 and COe analysis, a heated gas ...


    By ENOTEC GmbH

  • Unique Engine Analysis System Now Offered

    Environnement SA (France) now offer heated, turnkey, gas analysis systems which are very easy to use and perform fast, continuous and simultaneous measurement of NH3 and NOx in DeNOx applications. These systems are ideal for engines where SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) have been implemented. In DeNOx systems using urea injection with ammonia (NH3) ...


    By Environnement S.A

  • Thermo Fisher Scientific introduces the Thermo Scientific Model 60i Full-Extractive

    Thermo Fisher Scientific Inc., the world leader in serving science, today announced the new Thermo Scientific Model 60i, a full-extractive, multi-gas analyzer that features non-dispersive infrared (NDIR) optical filter technology to ensure accurate, precise measurement of up to six gases, including CO, CO2, NO, NO2, and SO2. The Model 60i also accommodates an optional O2 measurement capability ...

  • Manufacturers Find Cost-Efficient Ways to Meet Surging Demand

    Highland, Michigan – July 15, 2010 – Neptech, Inc., a leading provider in the emissions testing field, has expanded its scope of contract services at its Tech Center in Highland, Michigan.  The Neptech team is structured to support an expansive market – from original equipment manufacturers and suppliers to R&D labs and testing facilities throughout North America.  ...


    By Neptech Inc.

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • ERG helps Crown Pet Foods deliver improvements in odour emissions

    ERG (Air Pollution Control) Ltd announces the successful installation of a new odour control plant at Crown Pet Foods as part of a £1m plus investment in upgraded odour control at their Castle Cary, Somerset, factory.Crown Pet Foods, who are owned by the global group Royal Canin, completed a new state-of-the-art pet food production facility at Castle Cary in late 2007. Although the facility ...

  • Fast transient mass spectrometer speeds the process

    Hiden Analytical introduce a new gas analyser - the HPR-20 QIC TMS system - specifically configured for analysis of fast transient pulses and of rapid compositional changes in gaseous processes. Developed for the researcher, the system is suited to studies of diverse thermally triggered and chemically triggered reactions.   The multi-mode Windows 7 MASsoft Professional software features ...


    By Hiden Analytical

  • Ship Exhaust Monitoring

    Untitled Document Enviro Technology can provide cost-effective solutions to the problems of monitoring ship exhaust emissions. ...

  • Combustion Controls Systems Equipments Market 2013 Analysis & 2018 Forecast

    The report “Combustion Controls, Equipments & Systems Market – By Product [Components (Boilers, Thermal Oxidizers, Incinerators, Gas Turbines), Systems, Monitoring & Control Instruments], Application & Geography (2013 – 2018)” by MarketsandMarkets is now available at RnRMarketResearch.com. Contact ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you