high pressure blower News

  • Delta Blower E-Design Blower units are even more energy-efficient

    The new E-design reduces energy consumption depending on volume flow and differential pressure by up to four percent. This is possible as a result of numerous design enhancements, such as the flow-optimised routing of the intake air in the acoustic hood and the filter silencer. In particular, the patented intake cone is to be emphasized, which not only minimizes pressure losses, but also ...

  • From atmospheric pressure to vacuum

    Negative pressure from up to 500 mbar (300 mbar abs.) can already be achieved with one stage. This is possible thanks to the AERZEN positive displacement blowers of series Delta Blower G5, or the newly developed rotary lobe compressors of series Delta Hybrid. A vacuum pumping set is mandatory for pressures below 300 mbar abs., and here a backing pump and a vacuum positive displacement blower are ...

  • New York Blower`s (NYB) ever expanding product line...

    Over the last couple of years The New York Blower Company has worked hard to respond to customer needs by expanding an already large product line. Some of the major additions to NYB's line of fans include: BC Product Line This high capacity product utilizes a ...


    By AirSys Technologies, Inc.

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By Ecotech Pty Ltd

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By American Innovations (AI)

  • Water supply for the city of the future

    The project SEMIZENTRAL, of the Technical University Darmstadt in the Chinese coastal metropolis of Qingdao, has been given a GreenTec Award. This project shows how to plan infrastructure as needed, and how to put these infrastructure plans into practice. Instead of building one central sewage plant for the entire city, the scientists have pursued a semi-centralised approach with a number of ...

  • Industrial Maid introduces new modular EB 56 weld fume and dust collection unit

    Industrial Maid introduces the new Model EB56 series packaged air filtration unit. This system is designed to handle welding smoke and fumes, grinding dust and other airborne particulates. The powerful 4500 CFM, 5 HP motor with a direct drive high pressure BI composite blower makes the system quiet, efficient and easy to service. The air passes through a spark baffle for arrestance, then moves ...


    By Industrial Maid LLC

  • Aerzen Turbo – Solution for tomorrow’s world!

    With the experience in manufacture of positive displacement blowers since 1868 and screw compressors since 1943 Aerzen regularly sets new standards in quality and innovation of twin shaft rotary piston machines. Aerzener Maschinenfabrik GmbH counts among the pioneers in compressor technique and is one of the world-leading manufacturers today. For the first time now Aerzen presents a new ...


    By DECHEMA Ausstellungs-GmbH

  • AERZEN TURBO convinces with the new concept for oxygen introduction at Wansdorf sewage plant

    The company operating the Wansdorf sewage plant, which was completed in 1998, is a co-operation between Berliner Wasserbetriebe, four municipal authorities and a special-purpose association in Brandenburg. More than half of the waste water purified in Wansdorf comes from Brandenburg, and the rest comes from Berlin. The plant was designed for a population equivalent of 200,000. As the waste water ...

  • Introducing the Hydro-Oil Twin for deep vacuum applications!

    Engineered vacuum packages  “Hydrotwin” and “Oiltwin” are the new series of compact high vacuum packages that guarantee a working vacuum level up to 29.86” HgV (1.5 Torr abs.) and capaci0es to 2100 ACFM (3500 m3/h). The Package The project has been developed with the close cooperation of Bora Blowers who are specialists ...


    By Travaini Pumps

  • Even better performance in the aeration tank

    Until now, the combination of AERZEN blower, turbo and hybrid technology has offered the most efficient solution for the air supply of aeration tanks in a wastewater treatment plant. With AERsmart, the new control combination from AERZEN, performance can now be sustainably increased even further. The load operation in organic wastewater treatment plants is subject to ...

  • contec at the 45th Turbomachinery in Houston

    On the Houston Turbo Show, we will show you how you can achieve almost zero emission of oil mist on your lube oil systems and regain high-quality oil.  contec Oil Mist Separators (COMS) for the extraction and filtration of oil mist are used for large-scale compressors, gas and steam turbines, generators and other equipment with oil systems to ensure clean, oil-free exhaust air. contec Oil ...

  • The principles of aeration & mixing utilizing process aerator technology

    Aeration and mixing are necessary elements for aerobic biological wastewater treatment processes to maintain a healthy, stabilized biological population and thus, insure optimal treatment of the wastewater assuming there is adequate contact time and substrate available. In the design of wastewater treatment plants, aeration typically involves supply of both oxygen and mixing. Aeration is a large ...

  • Soil-Therm now offering Remediation Monitoring and Control (ReMAC)

    SOIL-THERM now offers the biggest advancement in environmental equipment ever! Our ReMAC technology allows Soil-Therm equipment operators huge advantages over all other equipment. Monitor all operation of the system, extract logged data anytime, make adjustments to optimize operation, diagnose and troubleshoot system operation before getting ...


    By Soil-Therm Equipment, Inc.

  • AERZEN Turbo in new splendour.

    Since the energy requirement for the aeration of aeration tanks in wastewater treatment plant reaches 70 % , energy efficiency is still the decisive indicator for a healthy energy balance. Many AERZEN customers worldwide could already benefit from the energy savings since 2010 when the product with the extremely efficient turbo technology was launched. The successful series TB has now been ...

  • PTO Vac Truck on display WJTA Show in New Orleans Nov 2-3

    We will be featuring one of our HTV PTO vac trucks at Booth # 1030 Come see us at the WJTA show in New Orleans on Nov 2nd and 3rd, 2016. We will have one of our HTV PTO vac trucks there. Booth # 1030 ...


    By Vac-Tron Equipment

  • Skid-Mounted Pneumatic Bulk Bag Discharging System Transfers to Silos

    A Flexicon Bulk Bag Discharging System with integral Pneumatic Conveying System transfers material from bulk bags to silos and other storage vessels. Unlike most discharging systems that move material from bulk bags to smaller storage vessels and process equipment, this positive pressure pneumatic system is designed to fill bulk storage facilities on islands or other locations unable to receive ...


    By Flexicon Corporation

  • 150 years AERZEN, part 2 1931–1984 - AERZEN breaks records

    The production of screw compressors, which have since become one of the most important products made by AERZEN, began during the Second World War. At that time, the Reich Ministry for Armaments and War Production instructed Managing Director Karlheinrich Heller to design a screw compressor, intended to serve as an exhaust gas compressor in new submarine types. After a period of negotiations ...

  • PTO Vac Truck with Jetter System (Video)

    Vac-Tron Equipment is on a roll. Only one year after releasing their very first HTV (Hydro Truck Vac) PTO, they are now introducing their NEW JTV (Jetter Truck Vac) PTO series. The JTV 873 PTO is a new series of PTO truck driven systems that combine vacuum excavation with high pressure jetter capabilities putting this truck in a league of its own. The Power Take Off of the truck drives ...


    By Vac-Tron Equipment

  • Transparancy of information 4.0! Process optimisation by condition monitoring.

    By means of its communicative control system, AERtronic, AERZEN has been offering the possibility to integrate process air packages into the production network of the customers for a long time. Furthermore, the control system can be extended by the module embedded webserver so that operating or process data are retrievable at any time and from any point of the world. Warning or error messages of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you