high temperature boiler News

  • 9th International Conference on High Temperature Filtration – A great success!

    Organized by Evonik Fibres, the 9th International Conference on High Temperature Filtration, again turned out to be the top event for participants from around the globe. From September 24th to 26th 2008, a total of 86 experts from 5 continents, representing 18 nationalities, met to collect information around the main topic: “Coal, Biomass and Alternative Fuels”. (photo 1) Plant manufacturers, end ...


    By Evonik Fibres GmbH

  • How to transform the industrial coal boiler

    With the successive development of energy conservation and environmental protection policy,the traditional coal boiler is facing the problem being transformed.The industrial coal boiler can be transformed into the environmental protection boiler such as industrial biomass boiler,as a leading industrial boiler ...


  • Pakistan Vacuum Hot Water Boiler

    Vacuum Hot Water Boiler’s half bottom is Similar with ordinary boiler, combined with combustion chamber and heat transfer tubes. The inner part is the media hot water,and rest empty part is air, with an U tube works as heat exchanger,In the vacuum condition, As it runs in the condition of negative pressure,it absolutely ensures the safety. The media of hot water with no increase ,reduce,in ...


  • ASTM A426 / A426M - 11a standard specification for centrifugally cast ferritic alloy steel pipe for high-temperature service

    1. Scope 1.1 This specification covers centrifugally cast alloy steel pipe intended for use in high-temperature, high-pressure service. 1.2 Several grades of ferritic steels are covered. Their compositions are given in Table 1. 1.3 Supplementary Requirements S1 through S12 are provided. The supplementary requirements provide for additional tests of an optional ...


    By ASTM International

  • ZG tell you :How to select boiler for refineries

    Boilers are one of the most fundamental systems of a refinery or plant. They are literally the pieces of equipment that keep the plant up and running. However, they are one of the least discussed aspects of the plants because the focus is typically on the quantity and quality of their actual product output, or about the cost of the fuel and raw materials that are coming in. This article will ...


  • New ETA biomass boilers added to portfolio

    A big month for Innasol as it sees brand new ETA biomass boiler additions to the already extensive product portfolio – just in time for heating season! As the sole UK distributor of ETA biomass boilers, Innasol partners and Plumb Centre customers have access to the brand new ETA PE-K pellet boiler, available in 110kW, 140kW, 180kW, 199kW and 220kW. The ...


    By Innasol Ltd.

  • ASTM A369 / A369M - 11 standard specification for carbon and ferritic alloy steel forged and bored pipe for high-temperature service

    This guide specifies standard specification for heavy-wall carbon and alloy steel pipe made from turned and bored forgings and is intended for high-temperature service. Heat and product analysis shall be conducted on several grades of ferritic steels, wherein the material shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, ...


    By ASTM International

  • Vacuum Gum Removal Systems Increase PSI and Temperature

    U.S.A. – May 16, 2012 - Daimer Industries®, widely-established for chewing gum removal technology, just unveiled an enhanced line of KleenJet® Ultra 5000CVG steam vacuum cleaners gum wad extraction systems . The machines offer a higher level of both rated pressure and internal boiler temperatures. "By improving the psi levels and rated temperatures, we’re now ...


    By Daimer Industries Inc.

  • ASTM A234 / A234M - 11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added. Forging ...


    By ASTM International

  • ASTM A182 / A182M - 11a standard specification for forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service

    This specification covers forged or rolled alloy and stainless steel pipe flanges, forged fittings, and valves and parts for high-temperature service. After hot working, forgings shall be cooled to a specific temperature prior to heat treatment, which shall be performed in accordance with certain requirements such as heat treatment type, austenitizing/solution temperature, cooling media, and ...


    By ASTM International

  • ATTSU manufactures a superheated steam electric boiler of 1 Tn/h.

    ATTSU manufactures an electric steam boiler model GE 1000 RV, to produce 1,000 kg/h of steam at 8 bar. The high-quality steam produced is reheated in the own boiler up to a temperature of 310°C. Designed and built to ASME standards, the boiler is aimed at the maintenance of steam turbines. The supply voltage is 690V and may be also for 400V or 1000V. The control is centralized in a redundant ...


    By ATTSU TERMICA S.L.

  • ASTM A234 / A234M - 11a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

    This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The material for fittings shall consist of killed steel, forgings, bars, plates, seamless or fusion-welded tubular products with filler metal added. Forging ...


    By ASTM International

  • 20 Ton Waste Heat Power Plant Boiler in Vietnam

    Project: Q120/1000-20-3.82/450  Application: power generation Project site: H?i Duong, Vietnam In June, 2015, we had one set of 20 ton waste heat boiler exported to H?i Duong, Vietnam, the Q120/1000-20-3.82/450 boiler was purchased by a Vietnam power plant.  20 Ton Waste Heat Boiler specification Type: waste heat boiler Capacity: 20 t/h Rated steam pressure: ...


  • New at RESOL`s - the FK Solid fuel boiler controller

    The FK Solid fuel boiler controller has been especially developed for systems with solid fuel boilers, water heating stoves or pellet stove heating systems. With the integrated PWM outputs, the FK can manage the speed control of two high-efficiency pumps. With its easily configurable optional functions, the versatile software allows e. g. for the control of an electronic mixer for the return ...


    By Resol

  • SZS series oil & gas fired water tube boiler

    SZS series oil & gas fired water tube boilers, including oil, gas and fuel gas and dual three forms, the person when ordering please specify kind of fuel. ZG’s water-tube high presuure  ...


  • £25m Guardbridge Project Heats Up With Arrival of 130 Tonne Biomass Boiler

    The £25 million Guardbridge Energy Project moved a step closer to completion recently when the Vital Energi project team took delivery of the 6.5MW biomass boiler furnace which made the 1,300 mile journey from manufacturers Jernforsen who are based across locations in Sweden.  The furnace manufacturer was undertaken at Jernforsen’s own manufacturing facility in the remote town of ...


    By Vital Energi

  • Heat-recovery boiler -- Waste energy recycling is need in China company

    The Horizontal, watertube heat-recovery(HRSG) ...


  • 10 of the Best Boiler Feedwater Treatment Equipment Supply and Technology Companies

    Here at SAMCO Technologies, we understand that proper, economical treatment of your boiler feedwater is essential to the efficiency and overall success of your everyday process. Fouling, corrosion, and scaling can all decrease the service life and dependability of downstream equipment, driving up cost and disrupting project flow. While our custom-engineered boiler ...


    By SAMCO Technologies, Inc.

  • Easy TOC calibration for monitoring condensate and boiler feed water

    The calibration and validation of the TOC analysis calibration function in measuring ranges of 0-2,000 μg/l and lower is always a difficult task for the operator. The preparation of the calibration solution takes a lot of time and requires precision. LAR AG offers a newly developed and patent pending „gas calibration“ method to simplify this step. This latest invention will be presented at ...


    By LAR Process Analysers AG

  • Increased heavy oil extraction due to steam-injection boiler control

    Higher crude prices are leading producers to reevaluate costs of extraction from heavy oil fields. In steamflooding, control of saturated steam is vital for maximizing yield. A Chinese manufacturer of steam-injection boiler automation equipment, Xinjiang Shuangcheng Electrical Automation Engineering Co., Ltd., has found inductive conductivity sensors combine resilience and accuracy, helping their ...


    By Mettler - Toledo Int. Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you