humidity sensor News

  • Dyacon Air Sensors Combine Temperature, Pressure, and Humidity

    Dyacon air sensors, both the Modbus-compatible and SDI-12 versions, are digital output sensors that measure air temperature, barometric pressure, and relative humidity.   The low-power sensor elements ...


    By Dyacon, Inc.

  • AKCP introduces Waterproof Temperature & Humidity Sensor

    Bangkok, Thailand – AKCP Inc., the oldest and largest manufacturer of SNMP-based devices for environmental and security monitoring solutions introduces a new sensor for its sensorProbe line of products. AKCP Waterproof Temperature & Humidity Sensor The AKCP Waterproof Temperature & Humidity sensor is designed to work in wet environments and its revolutionary ...


  • RF Code Introduces Long-Lasting Wireless (Wire-free) Temperature-Humidity Sensor

    RF Code, a leading provider of active IT ...


    By RF Code Inc.

  • Vaisala launches new combined pressure, humidity and temperature transmitter

    Vaisala introduces a new generation barometric pressure, relative humidity and temperature measuring transmitter series, the Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300. The PTU300 features fully digital measuring electronics for all three parameters, several small RH&T sensor heads for different applications, calculated humidity variables, and a new graphical ...


  • The new ROTRONIC catalogue “Humidity and Temperature Measurement 2009/2010”. Precisely: Swiss!

    Last year ROTRONIC successfully launched their new HygroClip2 with the unique AirChip3000. Now ROTRONIC present a new, comprehensive catalogue for humidity and temperature measurement. The AirChip3000, developed and produced in Switzerland, is the result of intensive research and development. Most of the products listed in the new catalogue are based on this new chip technology. The HygroClip2 ...


    By ROTRONIC AG

  • The highly regarded Rotronic HygroGen2 Temperature and Humidity Generator is now available with a large chamber – HG2-XL Model

    Rotronic is proud to announce the launch of the HygroGen2-XL reference generator, compared with the ground breaking portable HygroGen2-S model, it has a chamber volume that is 10 times larger. This enables multiple probes from all manufacturers to be calibrated both in the laboratory and on-site. Calibrations can be performed across the working range of devices; with only a few minutes to reach ...


    By ROTRONIC AG

  • Innovative anemometer and wind direction sensor

    US Manufacturer of wind sensors Barani Design is expanding its portfolio of wind sensor solutions. The new wind speed sensor (anemometer) integrates a high response electronic ...


    By BARANI

  • Low pressure sensor for HVAC filters

    Honeywell has developed a new ultra-low pressure sensor for HVAC applications. The TruStability Ultra-Low Pressure Sensors HSC (High Accuracy Silicon Ceramic) Series and SSC (Standard Accuracy Silicon Ceramic) Series have high sensitivity with high overpressure and burst pressure. This technology protects the sensor and can sense very small changes in pressure. It can also work in environmental ...

  • Aquas sensors for UK water industry

    Mac Solutions has announced the UK availability of the Aquas Smart Water Solutions range which includes smart sensors, data-logging systems, communication gateways and field configuration software. The range, targeted specifically at the water industry, covers the complete water lifecycle from treatment to distribution. The Aquas range - which covers the complete water lifecycle from extraction ...


  • Air quality sensors track pollution

    Original story at MIT News Glimpses of blue sky are becoming a rare sight in Delhi, India’s capital, particularly in wintertime, when a thick white haze smothers the city. David Hagan, an MIT PhD candidate studying atmospheric chemistry and a Fellow in the MIT Tata Center for ...

  • Climatronics` field-proven All-In-One (AIO) compact weather station accurately measures temperature, relative humidity, wind speed/direction and barometric pressure

    Designed for maximum portability, Climatronics' field-proven All-In-One (AIO) compact weather station accurately measures temperature, relative humidity, wind speed/direction and barometric pressure.  Versatile and comprehensive, the basically maintenance-free 'All-In-One: (AIO) weather station, can easily operate in remote regions as well as urban environments worldwide. For years, ...


    By Climatronics Corporation

  • New Vela ™ Multi-Sensor Weather Station

    The new Vela (pronounced Vay-luh) Weather Station from Columbia Weather Systems combines the ease of an all-in-one sensor package with the reliability and affordability of mechanical wind sensors. In addition to wind speed and direction, the sensor module incorporates barometric pressure, as well as ...

  • Rotronic’s HygroClip2 sensor receives award in USA

    At the AHR EXPO 2009 in Chicago, awards were presented for the top achievements in a total of 9 categories. Rotronic’s newly developed sensor, the HygroClip2, received the award in the category “Indoor Air Quality”. The AHR EXPO in Chicago is one of the most important trade shows worldwide in the area of “House, Ventilation and Air-conditioning”. Every year, parallel to the exhibition, the ...


    By ROTRONIC AG

  • Value for money air quality sensors for smart cities

    Smart city projects increasingly seek to include air quality measurements. If city authorities and the public are being asked to act based on air quality readings they must be credible. Whilst cheap sensors may offer easily integrated readings, they offer poor value for money if the information they produce cannot be trusted by the public, smart city project managers and stakeholders. The search ...


    By AQMesh

  • Ice-free Ultrasonic Wind Sensor from Vaisala

    The Vaisala WINDCAP® Ultrasonic Wind Sensor WS425 F/G is a premium, ice-free sensor for measuring surface wind speed and direction. The sensor has no moving parts and it is resistant to contamination, salt, dust, and corrosion. Thus, the WS425 F/G requires no on-demand or periodic maintenance. The sensor has a heating feature with a total heating power of 150 W. Wind speed can be measured up to ...


  • New Transport Brochure from Biral on Meteorological Sensors

    Biral’s range of visibility and present weather sensors are renowned for their quality and precision measurement of conditions in the road and rail environment. Each system can be tailored to precise needs and provides data to the forecast provider. Biral equipment provide present weather information in addition to  ...

  • OTT launches new Smart Weather Sensors

    Specialist hydrometeorological instrumentation company OTT Hydrometry has a long history in the development of leading edge sensor technology and the latest additions to the company's family of weather monitoring instruments exemplify the company's focus on high levels of performance combined with both simplicity of use and minimal maintenance. The newest version of the Pluvio2 offers the most ...


    By The OTT Hydromet Group

  • Leading Sensor Manufacturer Targets Construction Industry

    SST Sensing the UKs leading manufacturer and supplier of gas and liquid sensors has launched a new product aimed at the construction industry. Part of SST’s business strategy for 2014 is to target the construction industry, particularly in the public, private and commercial sectors with their ...


    By SST Sensing Ltd

  • LiCONiC AG selects Edinburgh Sensors’ CO2 monitors

    Edinburgh instruments are delighted to announce that LiCONiC AG (a leading Swiss scientific instrument maker) have selected the Edinburgh Sensors GasCheck IR CO2 sensor for integration into their range of CO2 Incubator products. LiCONiC AG manufacture a wide range of automated incubators for use in life science research applications including cell screening. Selective high quality CO2 measurement ...


    By Edinburgh Instruments Ltd

  • On-Site Calibration with weather sensors from Lufft

    Sometimes it is not possible to renounce for your meteorological stations for several days to ship them for calibration to a calibration laboratory. Nevertheless, the measurement technique should be calibrated at least every two years – The solution is on-site calibration! Two examples of such service I would like to present in more detail in this blog post: Lufft ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you