humidity temperature probe News

  • Dyacon Air Sensors Combine Temperature, Pressure, and Humidity

    Dyacon air sensors, both the Modbus-compatible and SDI-12 versions, are digital output sensors that measure air temperature, barometric pressure, and relative humidity.   The low-power sensor elements ...


    By Dyacon, Inc.

  • RH-AS2 %RH, dewpoint, temperature probe for AdvancedSense

    A new probe is available for GrayWolf’s rugged, hand-held AdvancedSense HVAC/OH/FM/IAQ meters.  The RH-AS2 probe is capable of measuring: Relative Humidity Dewpoint Absolute Humidity Specific Humidity Wetbulb temperature Drybulb temperature This small diameter (14 mm, 0.6 inch Ø, 40mm, 1.6 inch L) probe may be ...


    By GrayWolf Sensing Solutions

  • Vaisala launches new combined pressure, humidity and temperature transmitter

    Vaisala introduces a new generation barometric pressure, relative humidity and temperature measuring transmitter series, the Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300. The PTU300 features fully digital measuring electronics for all three parameters, several small RH&T sensor heads for different applications, calculated humidity variables, and a new graphical ...


  • Free Environmental Probe with Purchase of Portable Particle Counter

    From now until 6/30/2013 when you buy a Kanomax Model 3910 or 3905 Portable Particle Counter we’ll give you a free environmental probe.The probe has a $600.00 USD value. The new Model 3905 is the lightest, smallest portable 1 CFM particle counter.  Not every application requires a high flow rate unit, so we're introducing this economical model targeted for smaller cleanroom ...


    By Kanomax USA, Inc.

  • New TSI Q-Trak IAQ Monitor with Plug-in Probes

    TSI Incorporated announces its newly redesigned line of indoor air quality instruments, including the new Model 7565. This Q-Trak IAQ monitor allows real-time, simultaneous display of up to five key IAQ parameters including temperature, relative humidity, CO2 and CO. It also calculates dew point, wet bulb temperature, and % outside air. Adding parameters is easy with the optional “plug & ...


    By TSI Incorporated

  • The New HygroFlex8 – The All-in-One Industrial Transmitter from Rotronic

    Bassersdorf (Switzerland), 22 March 2010 – The new HF8 humidity and temperature transmitters from Rotronic are ideal for fixed-installation applications requiring high precision measurements. Based on the new advanced AirChip3000 technology, the HygroFlex8 communicates with all HygroClip2 probe types which utilize Rotronic’s time tested sensors and are used in thousands of applications worldwide. ...


    By ROTRONIC AG

  • XA1000 in use of Calibration Laboratory in Zagreb

    MTB inzenjering d.o.o. is a trade partner of our industrial measurement instruments in Zagreb, Croatia and our partner for ten years already. They are expanding their own laboratory (BMB laboratory) for calibration of relative humidity devices. For this, they recently needed a new, highly precise hand held device for reference measurements. They decided to rely on the XA1000 hand held device from ...

  • Ankersmid Components for Gas Analysis Systems

    Ankersmid have designed, developed and manufactured a complete product portfolio of gas conditioning products. a1-cbiss ltd selected the Ankersmid products to be integrated into the sampling system because of their good reputation and the excellent product features.known for their innovative and high performance gas conditioning and analysis equipment, Ankersmid now supply these gas conditioning ...


    By a1-cbiss

  • Carltex releases Universal All-in-One Instrument for monitoring Indoor Environmental & Air Quality parameters

    Monitor Over Six IEQ/IAQ Parameters with Only One Instrument  The New Multinorm is a Universal All-in-One Instrument for monitoring Indoor Environmental & Air Quality parameters. Available measurements include air temperature, air velocity, relative humidity, dew point, illuminance, luminance, CO, CO2 and sound (Class 1 & 2) analyses. Additional features of the Multinorm include ...


    By Carltex International Inc.

  • TSI Introduces New AEROTRAK™ Optical Particle Counters

    TSI Incorporated is pleased to introduce three new models of optical particle counters designed for a wide range of applications, including cleanroom testing and certification, aerosol research, pharmaceuticals and medical device manufacturing, food processing, filter testing and indoor environmental assessment. The Model 8220 is a handheld version with a 2.83 lpm (0.1 cfm) flow rate that counts ...


    By TSI Incorporated

  • The HygroPalm22 cased set – all you need for precise measurements

    Bassersdorf, 5th August, 2010  - The HygroPalm22 is regarded as the perfect hand-held measuring unit for checking climatic parameters. Its usable ranges are  0...100 %rh / -10..60 °C, and all psychrometric calculations are possible. The probe can be changed in seconds, and a mini-USB interface allows connection to a PC.   The case contains all the accessories needed for users ...


    By ROTRONIC AG

  • Professional image and video infrared thermometer for absolute traceability

    ATP Instrumentation has introduced an Infrared Thermometer that incorporates a camera to capture the image of the measured item. By simply pointing the thermometer and pressing the trigger, the item’s temperature is displayed. Pressing the trigger again captures a photo image which is overlaid with the measured item’s temperature. Also overlaid on the image are the date & time, ...


    By ATP Instrumentation Ltd

  • Gill Instruments exhibit at Oceanology International 2010

    Gill Instruments recently exhibited at Oceanology International 2010 marine science & technology exhibition at the Excel in London’s Docklands. Featured products on display were the New MetPak II Combined Weather Station as well as the WindSonic Wind Sensor, Extreme Weather WindObserver and WindMaster Pro Ultrasonic Anemometers. The MetPak II is a compact and lightweight multi-sensor instrument ...


    By Gill Instruments Limited

  • Monitor Over Six IEQ/IAQ Parameters with Only One Instrument

    The New Multinorm is a Universal All-in-One Instrument for monitoring Indoor Environmental & Air Quality parameters. Available measurements include air temperature, air velocity, relative humidity, dew point, illuminance, luminance, CO, CO2 and sound (Class 1 & 2) analyses. Additional features of the Multinorm include luminance measurement, contrast, globe temperature, thermocouple ...


    By Carltex International Inc.

  • TSI Introduces New AEROTRAK™ Optical Particle Counters

    TSI Incorporated is pleased to introduce three new models of optical particle counters designed for a wide range of applications including cleanroom testing and certification, aerosol research, pharmaceuticals, medical devices, food processing, filter testing and indoor environmental assessment. The model 8220 is a handheld version with a 2.83 LPM (0.1 cfm) flow rate that counts in up to 6 user ...


    By TSI Incorporated

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • ROTRONIC HW4 Software

    With our HW4 software, we are offering a comprehensive, yet easy-to-use, monitoring solution for all the current and planned products. HW4 meets regulatory requirements for the pharmaceutical and food industries, and is used as part of customers' Quality Management Systems. HW4 is specified for applications throughout the pharmaceutical, biotechnology, life sciences, food and many other ...


    By ROTRONIC AG

  • Investment boosts air quality instrument rental fleet

    In line with its strategy of continual investment in the latest instrumentation, Ashtead Technology has added TSI’s leading portable air quality monitors to its rental fleet. The new models include the lightweight, portable Q-TRAK indoor air quality monitor which is available with a probe for simultaneous measurements of CO2, CO, temperature and humidity or an alternative probe for air ...


    By Ashtead Technology Ltd

  • Spring launch for new MetPak II Combined Weather Station

    April 2010 will see the launch of Gill Instruments’ next generation Combined Weather Station, the MetPak II. Based on the popular MetPak, it has new, improved features including RS232, 422, 485 digital outputs plus additional weather monitoring features such as Barometric pressure and Dew point measurement. The MetPak II is a compact and lightweight multi-sensor instrument that measures a ...


    By Gill Instruments Limited

  • BOHS membership underpins instrumentation service

    Instrumentation specialist Ashtead Technology has joined the British Occupational Hygiene Society (BOHS), in order to ensure that its staff are kept abreast of the latest developments in occupational safety. Branch Manager Alan Hasson says: “Our customers expect us to be able to offer advice on the most appropriate test and monitoring instruments for every job and BOHS membership will ...


    By Ashtead Technology Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you