hydraulic shear News

  • Scrap Container Shear

    Wanshida Q43W-4000B Scrap Container Metal Shear in Clients yard in Ukraine. It started working from 2013 and power enough to working every day. : This horizontal metal shear is applicable for cutting the metal shaped in different cross section like round, square, channel, angle, I ...

  • ASTM C1738 - 11a standard practice for high-shear mixing of hydraulic cement paste

    This practice is useful in laboratory research on rheology of hydraulic cement systems as it has been shown to provide a paste with rheological properties similar to those obtained in a concrete from which the aggregate had been removed. Mixing of paste using C305 is not satisfactory as the paste is not thoroughly mixed, due to the absence of sand. In this practice the shear ...


    By ASTM International

  • The latest generation of scrap shear HPS 1000

    The first 1000 tons scrap shear of the new HPS shear series has been put into service for the company GÖRLICH in Germany ( Neuhof / Fulda). ATM successfully won the contract despite competition from leading German firms. Shortly after ATM took over ARNOLD in 2002 the development of the new generation of shear began. The first HPS 650 was delivered only a few months later to the company BHS Bernd ...


    By ATM Recyclingsystems GmbH

  • Metal Baler Shear Manufacturer Wanshida Exhibition Schedule

    Wanshida Exhibition Schedule 1.Exhibition name:  WORLD OF METAL 2015 Date: 2015.09.13-09.15 Venue: Bombay Exhibition Center, Mumbai, Maharashtra, India. ...

  • Update of an old Rotor Shear at a incineration plant

    Attero Moerdijk is a large incineration plant for household and bulky waste, processing about 1 million tons of waste per year. Previously a Lindemann rotor shear was used to shred the bulky waste before incineration, but due to high wear and maintenance costs and limited capacity it was taken out of production several years ago. With no shredding facilities on-site, for the past few ...


  • Metso introduces energy-efficient next generation of scrap shears Eta®Cut II

    Today Metso is introducing the next generation of scrap shears. The Eta®Cut II replaces the first generation Eta®Cut renowned for its high production capacity and reliability. In addition to the key features of the first Eta®Cut generation the new machine comes with a number of innovations: new Human Machine Interface (HMI), new transport design and ergonomic control cabin. The ...


    By Metso Recycling Equipment

  • Metso Recycling’s new TS EcoCut economical scrap shear is the perfect choice for entering the scrap processing market

    At the Expo Sucata exhibition in Brazil, Metso Recycling is introducing the new TS EcoCut, an economical, versatile scrap shear designed for a wide range of scrap types. The shear fits small to medium capacity demands and promises good performance at an entry level price. Proven features, such as a ...


    By Metso Recycling Equipment

  • ASTM D7752 - 11 standard practice for evaluating compatibility of mixtures of hydraulic fluids

    Hydraulic fluid compatibility is important to hydraulic equipment users because a mixture of incompatible fluids may produce a substance that is markedly inferior to its constituents. Even in identical base stocks, the formation of a precipitate may occur as a result of additive interactions. In this practice, compatibility will be determined using ISO ...


    By ASTM International

  • ASTM F862 - 11 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

    On application of the hydraulic fluid within the mechanical fluidic system, the fluid may become contaminated with acid and chloride ion. Mechanical shearing of the hydraulic fluid in the presence of the minute quantity of water and residual amount of organic solvents, used in cleaning, may initiate ...


    By ASTM International

  • Adelmann-Umwelt-GmbH-presents new shredder

    Shredder with a single rotary shear scores with superior efficiency and power Based upon a well-engineered, patented and proved technique Adelmann Umwelt GmbH put on the market a shredding machine for treatment and recycling of materials like e-scrap, tyres, commercial waste, paper and production of refused derived fuels. The shredder is already successfully running at the company Remondis ...


    By Adelmann Umwelt GmbH

  • Multi-Cut – our new multi talent of EHT

    A new powerful, hydraulic plate shear fully equipped is now modernising our production facility. It is perfectly suiting to our high-precision cut and serial production. Adjustment of die clearance and cutting angle, integrated handling systems like upholding mechanism of the plates and automatic refeeding of the plates to the machine’s front side provide a high throughput and improve our ...

  • Sulzer Sharpens the Offering of Agitators to the Wastewater Industry with Scaba TreatX

    Scaba TreatX are standardized Scaba agitators, available with short lead times and at competitive prices. The agitators are built of Scaba modules with excellent hydraulics and low energy usage. The agitators have a robust stainless steel design. The Scaba TreatX concept is developed especially for the municipal and industrial water and wastewater industry for the applications flash mixing, ...


    By Sulzer Management Ltd

  • Fifteen Percent Less Horsepower Required in Zinc Recovery Application due to Chemineer™ Model 20 and HT Agitators

    A state-of-the-art metal recovery project requires all equipment and systems to work in perfect unison and perform to optimal efficiency. A manufacturer in the southeast United States, specializing in zinc recovery technologies, approached the Mixing Technologies group of NOV for its minerals processing application experience, robust equipment design and technical consulting ...


    By National Oilwell Varco

  • THE GRAND SLAM™ WASTE RECYCLER FROM STEDMAN

    Aurora, IN - The Grand Slam™ Waste Recycler, manufactured by Stedman, is designed for sizing hundreds of materials and agglomerated wastes into carefully controlled uniform sizes, reducing maintenance time and expense. The Grand Slam Waste Recycler is capable of handling up to 100 tons of wet and sticky or dry and fibrous material per hour, and typical applications include: bakery waste for ...


    By Stedman

  • Unidirectional flushing reality for Gold Cast

    Gold Coast Water, Australia, has chosen MWH Soft"s InfoWater UDF software for designing its unidirectional flushing program. The decision helps leverage the utility"s investment in MWH Soft water modeling technology and gives Gold Coast Water an advanced solution for maintaining high levels of water quality and customer service. Unidirectional flushing (UDF) is the most effective way of cleaning ...


  • Indeco North America Names two new dealers in Midwest and Northeast

    Indeco North America, a leading provider of fuel -saving hydraulic breakers, compactors, steel shears, crushers , grabs and pedestal booms for demanding demolition, mining, recycling and road construction applications, has added two new official dealers - Gibson Machinery, LLC and W.I. Clarke – to its ever -expanding distribution network. Founded in 2003, Gibson Machinery sells, services ...


    By Indeco North America (INA)

  • MWH soft dramatically reduces time required to design and operate unidirectional flushing programs

    MWH Soft, a leading global innovator of wet infrastructure modeling and simulation software and technologies, has announced the release of version 6.0 of its industry-leading InfoWater UDF software. The new release, which utilizes both the MWH Soft InfoWater and ESRI (Redlands, CA) ArcGIS technology, provides substantial updates based directly on client feedback and real-world implementation of ...


    By Innovyze

  • Fifteen Percent Less Horsepower Required in Zinc Recovery Application due to Chemineer™ Model 20 and HT Agitators

    A state-of-the-art metal recovery project requires all equipment and systems to work in perfect unison and perform to optimal efficiency. A manufacturer in the southeast United States, specializing in zinc recovery technologies, approached the Mixing Technologies group of NOV for its minerals processing application experience, robust equipment design and technical consulting ...


    By National Oilwell Varco

  • ASTM C90 - 11b Standard Specification for Loadbearing Concrete Masonry Units

    This specification covers hollow and solid concrete masonry units made from hydraulic cement, water, and mineral aggregates with or without the inclusion of other materials. There are three classes of concrete masonry units: normal weight, medium weight, and lightweight. These units are suitable for both loadbearing and nonloadbearing applications. Concrete masonry units shall be made from ...


    By ASTM International

  • Universal Wrecking Corp Highlights Demolition Equipment Rental Services

    Universal Wrecking Corp (UWC) is a diversified demolition, wrecking and scrap metal recycling contractor but also provides rental of demolition equipment.  We have an extensive fleet of specialized demolition equipment which we will rent with a skilled operator or bare so that our clients may utilize their own workforce. Our fleet of specialized demolition and wrecking equipment for rental ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you