impact wear News

  • Kynar PVDF Jet Aerator For Improved Wear Resistance

    An inside look at KLa’s Jet Aerator Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle (see above) is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, ...


    By KLa Systems, Inc.

  • Wear parts cost analysis from HMH puts RM80 in front

    The German operator of a gravel pit in Bratislava, Slovakia had screened approx. 400,000 tonnes (440,000 US tons) of 22/100 mm (7/8'/4') gravel from the River Danube and kept it in storage, although there turned out to be no opportunity to sell it. Since the storage heaps were now too high - and over 1,000 tonnes (1,100 US tons) more were arriving every day - they decided to purchase a crusher. ...


    By RUBBLE MASTER HMH GmbH

  • RUBBLE MASTER Compact Recycler stands out through wear cost optimisation

    With wear costs you would otherwise only expect from jaw type crushers, and high-quality crushed material, the RM80 had the edge for Georg Guth GmbH in Fürstenfeld.98% quartz content in the feed material – a true challenge for any crusher. That was the starting point prior to the decision for a crusher to handle 100,000 tonnes of quartz gravel. Some 400,000 tonnes can be found at the Fürstenfeld ...


    By RUBBLE MASTER HMH GmbH

  • New Heavy Duty Rotor for TANA Shark shredders significantly increases wear resistance

    Tana has developed a new heavy duty rotor for TANA Shark shredders. Wearing resistance of the rotor has been improved by Chrome-Carbide coating which has 10x better wearing resistance than standard materials used. The new rotor was tested in the UK by an experienced TANA user and they were very happy with the results. ”The shredder has been much easier ...


    By Tana Oy

  • Ochsner Health System, GE Healthcare, and The Idea Village launch “Wear Your Health” Challenge to help patients with chronic diseases

    Ochsner Health System, GE Healthcare (NYSE: GE), and The Idea Village have launched today the “Wear Your Health” challenge. This challenge seeks to identify wearable technology concepts and mobile application solutions that can transform healthcare outcomes by addressing behavior management in patients with chronic disease. ...


    By General Electric

  • Mesothelioma: Making an impact on the shipyard industry

    From the beginning of World War II to the 1980s, shipyard workers were routinely exposed to asbestos-containing materials. During this time, asbestos was considered an ideal material due to its resistance to corrosion and ability to withstand high temperatures. However, the effects of using asbestos are strongly felt today as many past shipyard workers are still developing asbestos-related ...


  • Potential long-term health impacts for oil spill clean-up workers

    A new study of clean-up workers seven years after the 2002 Prestige oil tanker spillage has found potential evidence for long-term impacts on their hormonal and immune systems as a result of exposure to the oil. The results suggest new health surveillance measures may be appropriate for workers involved in future oil clean-up operations. In November 2002, the oil tanker Prestige ran into trouble ...

  • Potential long-term health impacts for oil spill clean-up workers

    A new study of clean-up workers seven years after the 2002 Prestige oil tanker spillage has found potential evidence for long-term impacts on their hormonal and immune systems as a result of exposure to the oil. The results suggest new health surveillance measures may be appropriate for workers involved in future oil clean-up operations. In November 2002, the oil tanker Prestige ran into trouble ...

  • Cost-efficient and environmentally friendly wind energy

    Gearbox failure is the primary reason for downtime in a wind turbine and is extremely costly to replace. One of the main and most damaging causes of gearbox failure is ferrous metal contamination under 10 microns in size which leads to bearing failure. Metal contamination, the primary contaminant produced by gear wear, suspends in the lubrication oil causing premature bearing failure as it ...


    By One Eye Industries Inc.

  • Concrete mixer paddles, scrapers & arm protectors with extra service life

    The construction industry increasingly requires the production of homogeneous quality, ready-mixed concrete from ever-faster mixing cycles, particularly for precast / prestressed concrete. Different stationary concrete mixer models have been developed to process the raw materials (sand, water, aggregates and cement) which cause intensive wear and tear of certain key parts through abrasion and ...


    By Castolin Eutectic

  • RM100 running costs well below the average

    Compact Recyclers are the cost-effective solution for mobile processing: versatile, powerful and stable in value. They produce homogenous, cubic, high-quality grain from construction waste and natural rock on-site economically and can be transported without special permits. High-quality manufacturing, high-value components and wear-resistant crushing tools ensure the efficiency and availability ...


    By RUBBLE MASTER HMH GmbH

  • Accentuating The Differences Between Health And Safety

    Since the inception of the Health and Safety at Work Act in 1974, there has been a successful drive to bring a responsible attitude towards fundamental health and safety processes to both employers and employees. As a result we now look on health and safety warnings and Personal Protective Equipment (PPE) as normal, realistic practices that save lives. But is it entirely accurate to assume that ...


    By Casella

  • Cost-efficient and environmentally friendly wind energy

    Gearbox failure is the primary reason for downtime in a wind turbine and is extremely costly to replace. One of the main and most damaging causes of gearbox failure is ferrous metal contamination under 10 microns in size which leads to bearing failure. Metal contamination, the primary contaminant produced by gear wear, suspends in the lubrication oil causing premature bearing failure as it ...


  • EPUK calls for action to prevent air pollution deaths

    Environmental Protection UK has questioned the lack of urgency in action to address air pollution in light of a new report by the Department of Health's Committee on the Medical Effects of Air Pollutants (COMEAP). The report finds that air pollution, largely from road traffic, was a contributory factor in up to 200,000 premature deaths during 2008. The new report 'the Mortality Effects of ...


    By Environmental Protection UK

  • 54 m3 Hardox Scrap Trailer from Arslan

    Arslan Damper will provide a big advantage to its customers with 54 m3 new generation Hardox Scrap Trailer developed for the scrap industry. The name of new model is ARS 10000. ARS 10000, the new model scarp trailer developed in Arslan Tipper facilities located in Aliaga Organized Industrial Zone gets big attention. ARS 10000, developed by the Arslan Damper engineers, weights 2-3 tonnes lighter ...

  • RM100 increases daily capacity thanks to availability + throughput continuity

    RUBBLE MASTER Compact Recyclers set standards and open up a whole new class for mobile recyclers. The RM100, the latest model of their impact crusher range, is a convincing solution featuring a previously unattained combination of throughput performance and compactness. Simply the best you can currently achieve with a 28-tonne machine. The RM100's outstanding intake and crushing performance ...


    By RUBBLE MASTER HMH GmbH

  • RUBBLE MASTER RM80 goes `down under`

    ADELAIDE / AUSTRALIA. After several RUBBLE MASTER RM60 have been working in Australia for years, now the time has come for the powerful Compact-Recycler RM80 and the smart RM70. The new RUBBLE MASTER dealer for Australia and Asia/Pacific Wieland Process Equipment Pty Ltd from Liverpool are facing a great deal of interest in the mobile crushing facilities RUBBLE MASTER equipment offers. So David ...


    By RUBBLE MASTER HMH GmbH

  • 2-STAGE REDUCTION SWING HAMMER MILL FROM STEDMAN

    Aurora, IN - Stedman manufactures a 2-Stage Reduction Swing Hammer Mill for pulverizing, crushing and disintegrating rendering byproducts, wood, chemicals, minerals, garbage, fertilizer, aggregate materials, grain and more at a lower cost per ton. Materials in this unit are disintegrated/shattered by the revolving hammers upon entry and are further reduced by the force of impact against the heavy ...


    By Stedman

  • Larson Electronics releases an Intrinsically Safe Multi-Function LED Head Lamp

    Longtime leading supplier of explosion proof lighting equipment Larson Electronics has announced the release of a new multi-function LED head lamp made for use in hazardous locations where gases, vapors, and various dusts exist. The EXP-LED-HL-MX2 ...


    By Larson Electronics LLC

  • EPA approves new coolant for car air conditioning systems / better climate protection without harming the ozone layer

    The U.S. Environmental Protection Agency (EPA) has issued final approval for a new refrigerant for use in motor vehicle air conditioning systems that does not deplete the ozone layer, which helps protect the environment and people’s health. The new chemical, HFO-1234yf, may now be used in air conditioning for new cars and light trucks. When used appropriately, this chemical can reduce the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you