impeller pump News

  • The Chemineer Model 20 HT/GT with the RL-3 Ragless Impeller Creates the Ideal Wastewater Treatment Mixer

    Combining the Chemineer Model 20 HT/GT mixer with the Chemineer RL-3™ impeller creates the ideal mixer for wastewater treatment plant applications. The high-efficiency gearbox of the Model 20 and the unique characteristics of the RL-3 impeller work together to eliminate downtime and maintenance costs, increase performance and extend the service life of the agitator. The Chemineer RL-3 ...


    By National Oilwell Varco

  • JS-Pumps Submersible Pumps

    Maris Pumps is pleased to announce the addition of JS-Pumps to our submersible pump range. These high quality, versatile submersible pumps are suitable to industrial and domestic use with a range of features to suit almost all applications. The range includes the RSD-400, a low-level puddle pump capable drainage down to 1mm, up to the GS and SK sewage pumps with grinder and cutter impellers. ...


    By Maris Pumps Ltd

  • Pump Repair Kits

    Cornell is offering pump repair kits for select models of pumps. With genuine Cornell parts, you help protect your warranty, and know that you are using the same quality parts we have made in Oregon since 1946. These kits feature parts commonly used together for pump maintenance such as: Wear rings Shaft sleeves Volute gaskets Impeller washers Lockscrew ...


    By Cornell Pump Company

  • Cornell Pump Releases New 14NHG34 Pump

    Cornell Pump is pleased to announce the release of the new 14NHG34 pump. This is a high head, high flow municipal water transfer pump. This pump tested very well on the stand and is the highest energy pump Cornell has ever produced. Here are the specs and features on a standard 14NHG34: Construction 16” 150# suction, 14” 300# ...


    By Cornell Pump Company

  • A Horde of Cornell Pumps in Mongolia

    A first-hand account of 14NHGH Redi-Prime® pumps installation, testing, and site training in Mongolia. Four Cornell 14NHGH Redi-Prime pumps replaced aging Soviet infrastructure in Ulaanbaatar Mongolia. Promoting tourism from SE Asia, Europe, and Australia, the Mongolian government has been keen on improving infrastructure. Prior to arrival of the 14NHGH pumps, the treatment plant had been ...


    By Cornell Pump Company

  • Tsurumi expands pumping power

    Tsurumi is meeting the increased demand for powerful, reliable and robust pumping solutions in Europe with the introduction of four of its largest and most powerful contractor pumps. At almost 2m tall, the pumps are designed for high-head, high-capacity and high-pressure work in rugged conditions. Featuring capacities of up to 12,500 l/min and heads of up to 150m, the pumps join the global pump ...


  • Heavy duty centrifuge slurry pumps

    Tangshan Relia Industrial Pump Co. LTD, part of the Becker Group of Companies, has extended its range of slurry, submersible, horizontal and vertical pumps to include a new series of heavy duty slurry pumps designed to cope with demanding environments. “The AHM heavy duty slurry pump series encompasses a uniquely designed horizontal back suction unit,” says Ryan Huo, product ...

  • Submersible Dewatering Pumps with Built-in Intelligence

    In mining, tunneling, and construction, reliable Sulzer dewatering pumps are a valuable insurance against water-related downtime. Sulzer offers a wide range of pumps for various dewatering applications. These include sludge, drainage, and centerline pumps. Built-in intelligence is the outstanding feature of the X-range pumps, the new generation of dewatering pumps. In combination with the ...


    By Sulzer Management Ltd

  • Less and More: Why You Should Pump Slurries with a Peristaltic Pump

    LESS WATER Peristaltic Pumps Use Less Water Hose pumps can circulate slurry SGs of 1.6 to 1.8 or up to 80% solid content. The traditional centrifugal pump loses efficiency when the slurry SG reaches 1.3 or 30% solids. With this limitation, slurry pumps have significant process water demands : on a plant processing 70 tonnes of ore per hour, ...

  • New pump AP BluePRO HP

    Zenit Group is pleased to introduce to the market a new product created by the successful family of submersible pumps series BluePRO. This is the AP BluePRO HP, submersible pump with high head impeller and small dimensions which encloses high-level technological devices and guarantees high performances. The submersible pump is available with: 1,1 kW power pump outlet ...


    By Zenit Europe S.A.

  • Trailer pump operation and performance (part 2 of 3)

    Performance Curves Performance curves are used to predict a pump's flow as a function of total dynamic head, impeller diameter, and rotational speed. Total dynamic head (TDH) is measured in feet and equals the total of a system's static and dynamic heads. Static head is the vertical distance the fluid is lifted, and does not change the flow. Dynamic head represents the potential ...


    By SRS Crisafulli, Inc.

  • DR- steel and DG- steel stainless steel pumps

    Zenit presents the new line of stainless steel electric pumps with drainage-style hydraulic units and set-back Vortex impeller. With their variety of range, technological features and high performance, Zenit is confident that these products will meet all the most demanding ...


    By Zenit Europe S.A.

  • SNS Pumps Set New Standards

    Sulzer’s brand-new SNS process pump series outperforms other process pumps on the market. Thanks to an innovative and compact design, the SNS pumps are more efficient than conventional pumps. The SNS pumps are suited for a broad range of applications. The SNS pumps are end-suction, single-stage pumps. They can pump clean and slightly contaminated liquids, viscose ...


    By Sulzer Management Ltd

  • Wastecorp Launches New Trash Pumps

     Wastecorp Pumps, one of the leading manufacturers of diaphragm pumps, trash pumps and plunger pumps, launched today a new engine driven trash pump product line under its Trash Flow® brand. Wastecorp's new trash pumps are available in 3" and 4"rental pump models and 3", 4", 6", 8", 10" and 12" municipal/industrial pump classifications with over nine choices to select from. More ...


    By Wastecorp Pumps

  • Chopper pump makes mincemeat of pork scratchings

    Problem: Fats and pieces of pig skin used in the manufacture of pork scratchings at OK Snacks were causing standard equipment to break down, resulting in time and cost spent on clearing the blockage. Solution: A reception tank was installed with an external Landia chopper pump placed near the bottom. Furthermore, a recirculation system was introduced which allows the pump to chop and then ...


    By Landia

  • MX High Head from Cornell Pump Company

    MX HIGH HEAD DEWATERING pumps are designed to handle high head applications while providing a long service life. The high head MX SERIES pumps have multi-vane, enclosed impellers designed for industry leading efficiency. The MX SERIES pumps have extra heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine mounted configurations. ...


    By Cornell Pump Company

  • Release of DESMI Modular S pumps Video

    The Modular S video shows the monobloc version, the free shaftend version, the baseplate version, the super self-primer version and all the features such as: - The Safety valve to avoid steam explosion - The Non-return valve preventing prefilled water from escaping pump casing - The Semi-closed impeller with curved vanes and replaceable wear ring - The Mechanical Shaft seal - ...


    By DESMI A/S

  • Gorman-Rupp Introduces The Infinity Line of Submersible Pumps

    New Efficient, Dependable Solids-Handling Pumps The new Gorman-Rupp line of Infinity submersible solids-handling pumps are designed to provide you with the ultimate in pumping performance. Built to the same exacting standards you’ve come to expect from our industry-leading self-priming pumps, these pumps are designed for easy maintenance and constructed for long life. The Infinity ...


    By Gorman-Rupp Co.

  • Introducing Cornell Pump`s V Series

    Since our start in 1946, Cornell has designed and built pumps that cover a wide range of applications and duty points. We're pleased to extend our line of products with the V-Series line. The V-stands for Value, and that's just what these pumps bring to applications such as: Agriculture Municipal/clear water utilities Booster pumping Water transfer ...


    By Cornell Pump Company

  • Griffin`s non-clog pumps built to aid in the rehabbing of America`s aging sewer infrastructure pumping sewage

    These pumps are capable of delivering flow over 17,000 gpm and head capacities of 240 ft. or more. Griffin non-clog pumps are an ideal solution for sewer bypasses, flood control, sumping, or any other application requiring high volume and the ability to move trash laden effluent(water with debris).Features:•Available in flows from a few gallons per minute to over 17,000 gallons per ...


    By Griffin Dewatering

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you