incineration kiln News

  • EPA Finalizes Clean Air Standards for Industrial Boilers, Incinerators and Cement Kilns

    Today, the U.S. Environmental Protection Agency (EPA) finalized changes to Clean Air Act standards for boilers and certain incinerators that will achieve extensive public health protections by slashing toxic air pollution, including mercury and particle pollution, while at the same addressing feedback provided by industry and labor groups, increasing the rule’s flexibility and dramatically ...

  • Cremation kilns with heat recovery and gases cleaning system

    Kalfrisa undertakes the supply, in Spain and other European countries, of several cremation kilns for the funeral sector that incorporates, on one hand, a heat recovery system to reduce fuel consumption (SES: Save Energy System) and, on the other hand, a gases cleaning system to comply with imminent European environmental regulations related to emissions reduction. Kalfrisa so develops, in just ...


    By Kalfrisa, S.A.

  • Global Incineration and Incinerator Technologies Market Report

    While global growth in incineration staggered in the wake of the global economic turndown, global incineration markets are well-poised for continued recovery and consistent growth. Since 2008, global markets for incinerators have resurged from $7.9 billion to $9.2 billion in 2012 (CAGR of 3.9%). By 2022, global markets will more than double, reaching a value of $16.8 billion (2012-2022 CAGR of ...


  • Waste Incinerator Market Worth $16.8 billion by 2022 Forecasted in New Research Report at ReportsnReports.com

    While global growth in incineration staggered in the wake of the global economic turndown, global incineration markets are well-poised for continued recovery and consistent growth. Since 2008, global markets for incinerators have resurged from $7.9 billion to $9.2 billion in 2012 (CAGR of 3.9%). By 2022, global markets will more than double, reaching a value of $16.8 billion (2012-2022 CAGR of ...


  • EPA proposes changes to clean air act standards for boilers and incinerators/reconsidered standards would set emission limits for less than one percent of boilers, achieve public health benefits while increasing flexibility and responding to public input

    The U.S. Environmental Protection Agency (EPA) is proposing changes to Clean Air Act standards for boilers and certain incinerators based on extensive analysis, review and consideration of data and input from states, environmental groups, industry, lawmakers and the public. The proposed reconsideration would achieve extensive public health protections through significant reductions in toxic air ...

  • Quantitech – mad as hatters!

    MERCURY monitoring will be the major theme of Quantitech's participation at the 'MCERTS 2009' event to be held at the Bretby Conference Centre, 29th and 30th April 2009. During the 19th Century mercury was used in the hat making process and it is believed that the neurological effects of exposure are responsible for the 'mad as a hatter' phrase. Today, mercury is a particular concern in processes ...


    By Quantitech Ltd

  • US revises standards for hazardous waste combustion

    The US Environmental Protection Agency issued the National Emission Standards for Hazardous Air Pollutants (NESHAP) for new and existing hazardous waste combustors on October 12, 2005. The April 8, 2008 amendments to this rule revise or clarify several compliance and monitoring provisions in the October 12, 2005 rule. In addition, these amendments correct several omissions and typographical ...

  • Hazardous Waste Combustors Conference Focuses on Implementation of HWC MACT Standards

    Pittsburgh, PA – Registration is still open for the Air & Waste Management Association’s (A&WMA) 2007 Hazardous Waste Combustor Conference and Exhibition to be held March 13-14 in Charleston, S.C. The advanced registration deadline for the conference is Feb. 19. In 2005, the U.S. Environmental Protection Agency announced the National Emission Standards for Hazardous Air Pollutants: Final ...

  • NEW E4500-N The IDEAL Commercial & Industrial Combustion Gas and Emissions Analyzer

    The NEW E4500-N Hand-Held Combustion Emissions Analyzer is a new, rugged unit with the ability to measure NOx from high efficiency & condensing boilers, burners, engines, turbines, kilns, furnaces, incinerators and other industrial combustion processes.  Featuring a new large COLOR display and expanded internal memory, the E4500-N lets you ...

  • Huge NOx Control Program in China will Boost Catalyst and SCR System Sales

    Chinese utilities will be starting up more than 45,000 MW of new coal-fired boilers per year in China over the next seven years. This will result in coal capacity exceeding 1,100 GW. Most of the new capacity will be equipped with SCR. This prediction is made by the McIlvaine Company in its NOx Control World Markets report. To view the impact on the world market, it is beneficial to view the ...


    By The McIlvaine Company

  • New QSense Direct Contact Waste Heat Recovery System Economically Recover BTUs From Hot Gases

    Bionomic Industries Inc., a world-wide leader of proven air pollution abatement, product, and heat recovery technologies, has announced availability of their QSense Direct Contact Waste Heat Recovery System. Designed to economically recover valuable waste heat BTUs from boilers, kilns, dryers, ovens, thermal oxidizers and incinerators, QSense‚s highly efficient counter current flow ...


    By Bionomic Industries Inc.

  • Polysius and Vecoplan found a joint venture

    Alternative raw materials and fuels are gaining in importance Polysius AG of Neubeckum, a member company of the ThyssenKrupp Group, and Vecoplan AG of Bad Marienberg, a subsidiary of M.A.X. Automation AG, are going to address themselves even more strongly to environmental technology for the cement and lime industry. To this end, the two firms have established the joint venture Vecoplan FuelTrack ...


    By Vecoplan AG

  • Gasmet’s latest monitors on display at Achema

    Leading gas analyser manufacturer Gasmet Technologies Oy (Finland), has announced its participation in the Achema 2012 exhibition (Frankfurt, 18 – 22 June). The latest gas monitoring technology will be on display at stand C49 in hall 11.1 (Instrumentation, Control and Automation Techniques) including the new ...


    By Gasmet Technologies Oy

  • Tire recycling system produces diesel-grade fuel

    Disposal of scrap tires poses significant environmental and logistical challenges on a global scale, not excluding safety hazards, fires, overflowing landfills, health threats and severe atmospheric pollution. An estimate of over 800 million scrap tires is generated each year world-wide, and the total number of scrap tires in stockpiles is expected to be in excess of 10 billion. The GCC is no ...


    By Turret Media FZ LLC

  • ANDRITZ AG to deliver DeNOx plant to Currenta GmbH & Co. OHG, Germany

    The DeNOx plant is being built to treat the flue gases from the sewage sludge incineration line with multiple-hearth furnace VA3 and the two lime kilns VA1 and VA2. Completion of the project and start-up is scheduled for the end of 2018. By modernizing the plant, Currenta can ensure that the NOx limit, which will be lowered from 200 to <100°mg/Nm³ as from January 1, 2019 in ...


    By ANDRITZ AG

  • Gasmet’s latest monitors on display at Achema

    Leading gas analyser manufacturer Gasmet Technologies Oy (Finland), has announced its participation in the Achema 2012 exhibition (Frankfurt, 18 – 22 June). The latest gas monitoring technology will be on display at stand C49 in hall 11.1 (Instrumentation, Control and Automation Techniques) including the new Gasmet DX 4040 – a unique portable FTIR analyser that enables the measurement ...


    By DECHEMA Ausstellungs-GmbH

  • NEW E1500 Hand-Held Combustion Emissions Analyzer

    The NEW E1500 Hand-Held Combustion Emissions Analyzer is a new, rugged unit with the ability to measure CO & O2 from high efficiency & condensing boilers, burners, engines, turbines, kilns, furnaces, incinerators and other industrial combustion processes. Featuring a new large COLOR display and expanded internal memory, the E1500 lets you easily see and save your sample data without ...

  • Final Hazardous Waste Combustor MACT Standards Enacted Today - Summary of New Emissions Limits Available

    Untitled Document October 12, 2005, Westford, MA - US EPA's final hazardous waste combustor MACT (Maximum Achievable Control Technology) emissions standards for U.S. facilities were published in today's Federal ...


    By AECOM

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • NEW E6000 Innovative Hand-Held Industrial Combustion Gas and Emissions Analyzer

    The NEW E6000 portable flue gas & emissions analyzer is designed for emissions monitoring, maintenance & tuning of BOILERS, BURNERS, ENGINES, FURNACES, TURBINES, KILNS, INCINERATORS, and many other industrial combustion processes requiring accurate emissions measurements. Measure Up To SIX Gases Simultaneously Built-in Printer & Full COLOR Graphic Display ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you