infrared gas monitor News

  • Det-Tronics Releases New Line-of-Sight Infrared Gas Detector

    The new FlexSight LS2000 Line-of-Sight Infrared Gas Detector from Detector Electronics Corp. (Det-Tronics) is a next-generation solution for line-of-sight gas detection. Available immediately, the FlexSight LS2000 sets a new standard for infrared line-of-sight gas detectors with improved optical field of ...

  • On-site analysis of cannabis potency using Infrared spectroscopy

    Cannabis is increasingly being recognised for its therapeutic value. This has led to a reduction in its regulation, and even its legalisation, by many different governments. As cannabis production becomes legalised and regulated it is important that manufacturers can assess the chemical content and potency of their plants. The value of cannabis in the control of pain, spasm and a range of ...


    By Specac Limited

  • Designing drift-free and reliable NDIR gas sensors using modulated infrared sources

    Axetris IR sources are based on the proprietary thin film technology from Axetris, and deliver exceptional performance when electrically modulated in the 5-100 Hz range. This feature can help NDIR gas sensor designers achieve drift-free operation, combined with increased reliability and lifetime. Here we present qualitative conclusions (see table) based on multiple years of internal performance ...


    By Axetris Ag

  • LumaSense introduces ThermalSpection 724 infrared camera for automated high-voltage equipment monitoring

    LumaSense Technologies, Inc. introduced the next generation ThermalSpection 724 substation asset monitoring system that includes a hardened enclosure with thermal and visual imagers mounted on a pan-tilt positioner. An essential part of the upgraded system includes new interfaces to easily automate data collection and analysis. Hardware updates include a higher resolution infrared camera with a ...

  • New infrared flammable & CO2 gas sensor detects hazards where conventional sensors fail

    The Xgard IR from Crowcon is a new, low cost infrared (IR) flammable gas and carbon dioxide (CO2) sensor designed for use in fixed point detection systems where conventional detectors can prove unreliable or suffer from interference and damage. Conventional flammable gas detectors based on catalytic pellistors are susceptible to poisoning in some industrial atmospheres. This can make their ...

  • Refrigerant Gas Monitors Delivered to British MOD

    Wilks Enterprise, Inc., has delivered 26 portable refrigerant gas monitors to the British MOD through their agent in the UK, Quantitech Ltd. These monitors are being used onboard British submarines to help ensure safe air quality conditions. The Wilks InfraRan Refrigerant Specific Vapor Monitors that were supplied to the British MOD are portable infrared vapor analyzers. They are factory ...


    By Spectro Scientific

  • FTIR gas monitoring seminar a huge success

    Quantitech recently organised a very popular seminar focusing on multiparameter gas detection for both ambient and stack monitoring applications. The event took place at Bletchley Park and drew a large audience from a wide variety of industries including construction, industrial controls, Environment Agency, education, research, consultancies, test houses, hospitals, police, DSTL, Health & ...


    By Quantitech Ltd

  • Net safety monitoring flame and gas detectors receive SIL2 qualification

    Net Safety Monitoring is pleased to announce that our entire UV/IR flame detection line has received qualification as SIL2 devices by exida® and that our Phoenix Triple IR Flame Detector and our Millennium II Single and Multi-Channel Gas Detector have attained SIL2 qualification by TÜV SÜD for use in a high demand, or continuous mode of operation. The Net Safety Ultraviolet/Infrared flame ...


  • 4-Gas anesthetic vapor monitor, from Wilks Enterprise

    A portable, mid-infrared specific vapor analyzer, designed for easy, on-site measurement of four anesthetic gases, has been introduced by Wilks Enterprise, Inc. The InfraRan 4-Gas Anesthetic Specific Vapor Analyzer provides on-site, real-time measurements of Nitrous Oxide (0-1000 ppm), Desflurane (0-30 ppm), Isoflurane (0-30 ppm), and Sevoflurane (0-30 ppm). The analyzer is ideal for use in ...


    By Spectro Scientific

  • LumaSense releases software to improve gas-monitoring capabilities within manufacturing plants

    LumaSense Technologies, Inc. (LumaSense) has released software that allows industrial manufacturers to more easily and cost effectively monitor gas emissions by remotely controlling up to 24 multi-gas monitors with a single computer. The LumaSoft™ Gas MultiPoint 7950 remote control software is for use with LumaSense’s INNOVA 1316 multi-gas monitor, and it creates a scalable system ...


  • Frost & Sullivan Recognizes Precisive for Its Innovative Gas Monitoring Platform

    Based on its recent analysis of the sensors and analytical instruments market, Frost & Sullivan recognizes Precisive, LLC (Precisive) with the 2012 Global Frost & Sullivan New Product Innovation Award for developing an all-optical hydrocarbon composition analyzer in the form of a unique tunable filter spectrometer (TFS) design for on-line, real-time gas analysis. End users in the sensors ...


    By Frost & Sullivan

  • New Video features Portable Infrared Analyzers for On-Site Measurement of Oil in Water/Soil

    Wilks Enterprise is pleased to announce a new video featuring the measurement of oil and grease in water/soil with easy-to-use portable infrared analyzers.  This 3-minute video demonstrates how on-site measurements with the InfraCal TOG/TPH Analyzers can save time and money, as they allow oil and grease levels in wastewater to be determined in under 15 minutes.  These measurements help ...


    By Spectro Scientific

  • New Videos Demonstrate the Ease of using Portable Infrared Analyzers for On-Site Oil in Water Measurements

    Wilks Enterprise is pleased to announce several new videos that demonstrate the ease of using portable infrared analyzers for measuring the level of total oil and grease in water.  These short videos show how on-site measurements with the InfraCal TOG/TPH Analyzers take just a few simple steps to obtain accurate part per million (ppm) results in under 15 minutes. They are readily used ...


    By Spectro Scientific

  • General Monitors Gas & Flame Detectors Receive DNV-GL and MED Marine Approvals

    General Monitors announces that its most popular advanced gas and flame detectors now meet the Marine Equipment Directive (MED) for Det Norske Veritas’ (DNV) Offshore Standards as well as DNV·GL Type Approval. MED is the European Directive requiring that gas and flame detectors installed in marine environments be tested to specific standards and inscribed with the “wheel ...


    By General Monitors

  • Gas hazards in the oil, gas and petrochemical industries

    Although flammable and toxic gas hazards are generally well understood by operators, technicians and safety personnel in the oil, gas and petrochemical industries, continuous training and refreshment of knowledge is essential to avoid potential incidents caused by complacency. New personnel are often assigned work activities in potentially hazardous areas with only very limited training about gas ...

  • LumaSense Reshapes the Dissolved Gas Analysis (DGA) Market with New Category of Monitors that Reduce Transformer Outages

    LumaSense Technologies provide a new category of dissolved-gas analysis (DGA) monitors that allow electric utilities as well as energy –intensive companies to more effectively reduce outages caused by faulty load tap changers (LTC’s) and transformers. At a cost significantly less expensive than comparable DGA monitors and a unique hardware design that drastically cuts down ...


    By LumaSense Technologies, Inc.

  • Lumasense reshapes the dissolved gas analysis (DGA) market with new category of monitors that reduce transformer outages

    LumaSense Technologies, Inc. today introduced a new category of dissolved-gas analysis (DGA) monitors that allow electric utilities to more effectively reduce outages caused by faulty load tap changers (LTC’s) and transformers. At a cost significantly less expensive than comparable DGA monitors and a unique hardware design that drastically cuts down installation time, the LumaSense SmartDGA ...


    By LumaSense Technologies, Inc.

  • New Gas Detection System for Ethylene

    Statox 501 Ethylen As pre- product for Polyethylene, ethanol, ethylen oxide, ethylene dichloride and many other final or intermediate products, ethylene (C2H4) is one of the most important products in petrochemical industries. It is a colourless gas with a sweetish smell. It is asphyxiant but not toxic. More important is that it is explosive in concentrations from 3,1 % (LEL) to 32 % ...

  • CAI Introduces Boiler Monitoring Systems

    ORANGE, CA (April 6, 2010) - Continuous monitoring of CO, Oxygen, and NOx levels in boilers allows real time adjustments of boiler conditions and can save up to 5-10% on yearly fuel costs.   The California Analytical Instruments Boiler Monitoring System contains Analytical Modules for CO, O2 and optional NOx analyzers in an air conditioned NEMA 4 or 4X enclosure with connections ...

  • Oil spill monitoring in Western Australia

    EOMAP GmbH & Co has launched several services to support oil spill monitoring using optical satellites. The services were developed for mapping a major ecological disaster: a recent oil spill near the coast of Western Australia.   Oil, gas and condensate started seeping into the Timor Sea on 21st August from a leak 250 kilometres north of Truscott, and 690 kilometres west of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you