injection pump News

  • Microemulsion Injection & Separation Technology (MIST)

    The SAS-ES MIST system is designed to combine the SAS-ES products with the right engineering setup. Chemical injection and the following separation of the waste into oil, water and solids can be achieved routinely if provided with the right setup and the right training for the team. This system allows for fast setup and implementation of the SAS-ES process. ES 20' MIST System is packaged ...


    By Elgin Separation Solutions

  • Metering Pump Market: Chemical Injection, Dosing Pump Industry Forecasts to 2017 in A New Research Report at ReportsnReports.com

    The research report "Metering (Dosing/Chemical Injection) Pump Market, by Type (Diaphragm & Plunger/Piston) and Application (Water & Wastewater, Oil & Gas, Petrochemical, Chemical, Pharmaceutical, Food & Beverages, Pulp & Pater)- Global Trends & Forecasts to 2017" says Asia-Pacific, with its developing economies and rapidly expanding manufacturing bases, is expected to ...

  • Study: Mega injections of wastewater triggers more quakes

    The more oil and gas companies pump their saltwater waste into the ground, and the faster they do it, the more they have triggered earthquakes in the central United States, a massive new study found. An unprecedented recent jump in quakes in America's heartland can be traced to the stepped up rate that drilling wastewater is injected deep below the surface, according to a study in Thursday's ...


    By Associated Press

  • NEWLY patented liquid hypochlorite injection system

    Fluid Metering, Inc. introduces their NEW Patented Chloritrol™ valveless metering system for accurate, maintenance-free injection of Liquid Sodium & Calcium Hypochlorite for treatment of Municipal Drinking Water. Accurately metering of Liquid Sodium Hypochlorite presents a unique challenge because of the fluid’s tendency to out-gas.  Fluid Metering will be exhibiting the Chloritrol at ...


    By Fluid Metering, Inc.

  • Fuel Injection Systems Market Trends & 2018 Forecast

    The report “Fuel Injection Systems Market By Technology (Port Fuel, GDI, Direct Diesel), Engine Type (Gasoline, Diesel), Geography, Vehicle Type & Component: Global Trends & Forecast To 2018” by MarketsandMarkets is now available at RnRMarketResearch.com. Contact ...


  • Chemical Injection Pump Market by Type and Application (Water & Wastewater, Oil & Gas, Petrochemical, Chemical)

    Growing demand for environment friendly waste water disposal and increasing investment in modernization of infrastructure will drive the global chemical injection (metering /dosing) pump market to $4.1 billion by 2017, with a CAGR of 5.3% from 2012 to 2017. Asia-Pacific, with its developing economies and rapidly expanding manufacturing bases, is expected to experience highest revenue growth ...

  • Project water injection package for floating production facility in Norway

    Ruhrpumpen recently sold a Water Injection package that consists of quantity (2) SCE 10X8X16 (Booster pumps) and quantity (2) SM 6X13X10 (Main pumps). The 2.3 MW driver for the SM pump operated by a variable frequency drive. The Base plate, that also will carry the Lube Oil System, is designed as a 3 point support version. This is a special design for platforms and FPSO´s (Floating ...


    By RUHRPUMPEN GmbH

  • USACE integrates fracturing and iron/carbon injections at Colorado site

    The U.S. Army Corps of Engineers (USACE) performed a large-scale pilot test in 2009 for remediating TCE-contaminated groundwater at the "Atlas 12" formerly used defense site. Hydraulic fracturing was conducted to optimize emplacement of a zero-valent micro-iron/complex carbon amendment that chemically and biologically reduces contaminants in bedrock. Three-dimensional (3-D) mapping was used to ...


  • High Plains Gas Reworks Injection Facility Valving System to Yield Positive Results

    High Plains Gas, Inc. (OTCBB: HPGS) (or "HPG" or "the Company"), a Gillette, Wyoming based energy company actively engaged in the acquisition, development and production of natural gas primarily in the Powder River Basin, today announced that it has seen a significant reduction in the amount of chlorine needed to generate a "clean water sample" by reworking the valving system on one of its ...


    By Marketwire

  • Successful pilot injection of Nanoscale Zero-Valent Iron for groundwater remediation in Kara Trutnov site in Czech Republic

    Remediation company EKORA Ltd. in collaboration with company NANO IRON Ltd., producer of zero-valent iron nanoparticles (nZVI), conducted laboratory study and subsequent pilot injection of surface stabilized nanoparticles of elemental iron (product NANOFER 25S) to eliminate groundwater contamination of chlorinated hydrocarbons and hexavalent chromium in KARA Trutnov site in Czech Republic. ...


    By NANO IRON s.r.o.

  • Descaling calcium scale from injection moulds, and preventing new calcium scale leads to increased efficiencyand production with less downtime.

    MGH S.A of Pergamino Buenos Aires ARGENTINA… tells in their own words how Fluid Dynamics Colloid-A-Tron Technology improved the efficiency of their injection moulding circuitMGH S.A. is an Argentinean company dedicated to the production and commercialisation of plastic cable tiesMGH were founded as importers-exporters in 1880 and since 1994 have been working under licence from General Wiring ...

  • Determining the Pump Controls

    Before we discuss the topic of controls, it is important to understand that a metering pump takes external signals to turn on or off, as well as increase or decrease the flow capacity to meet the demand precisely. The signal to do these controls can come from a variety of external sources such as flow meters, sensors and / or PLC controllers. The flow capacity of a metering pump is ...

  • We are Gonna Need a Bigger Pump

    The Problem: At a large industrial site, traditional horizontal and vertical extent investigations failed to reveal what eventually turned out to be highly localized seams of Trichloroethylene (TCE) DNAPL at areas of the property where unusual lithology came into play.  In addition to the “hide & seek” nature of finding the contamination in these areas, it became ...

  • Update from the Field: Pumps in Place, Piping Assembled

    The Newberry site has been busy with AltaRock staff and contractors assembling stimulation infrastructure over the last few weeks. We’re happy to report that the pumps are in place, generators have been wired in and piping has been welded up. All the equipment has been pressure tested and is up and running as planned. Last night, we started to cool the with low-flow cold water injection. ...


    By AltaRock Energy, Inc.

  • NOV® Mono® makes pump maintenance a piece of cake!

    One year on from the launch of its ground-breaking EZstripTM progressing cavity (PC) pump, NOV® Mono®, Europe’s leading designer and manufacturer of pumps, parts, Munchers®, screens and packaged systems, has launched another maintain-in-place (MIP) innovation which is set to revolutionise the maintenance of a PC sludge cake pump. Specifically designed to minimise the time and ...

  • Parker Releases New Air Driven Liquid Pump

    Parker Autoclave Engineers, part of Parker Hannifin – the global leader in motion and control technologies, has released an innovative new air driven liquid pump, the AHL118. A high volume, double-ended, double acting high pressure pump, the AHL118 is designed for use in oil and gas, chemical, industrial and research applications. The pump operates to a ...


    By Parker Hannifin Corp

  • Allweiler pumps for environmental compatibility and a clean engine room

    Allweiler will present innovative pump sealing technology at the Norshipping trade fair (stand C02-12). Screw pumps made by Allweiler AG are now available with a new opto-electronic module for clean and secure operation. Known as 'ALLSEAL”, this intelligent technology provides safety against uncontrolled leaks and detects wear of the mechanical seal as soon as it begins. The result is an ...


    By ALLWEILER GmbH

  • LEAP launches its own UHPLC pump Gazelle 18

    This pump covers the widest range of all existing HPLC/UHPLC pumps for pressure and flow rate. No longer a need for more than one pump. Analyst driver can control multiple pumps. Could be a loading pump and an analytical gradient pump as part of one method. Bundled with a HTC, HTS or dual headed PAL serves as mass spec front-end for years to come. ...


    By LEAP Technologies, Inc.

  • 50 years of precision valveless pumps & dispensers from Fluid Metering, Inc.

    For the past 50 Years Fluid Metering, Inc. has supplied Precision Dispensers and Metering Pumps for Laboratory, Industrial, Process and OEM applications. Continuing its 50 Years of innovation, the NEW FMI Catalog includes three NEW Products. The NEW PDS-100 is a Programmable Dispensing System which uses precision stepper motors to control delivery from 500 nanoliters per dispense up to 2 liters ...


    By Fluid Metering, Inc.

  • Sulzer to Supply Pumps for Salt Caverns Storage Project in Canada

    Sulzer received an order from Strathcona Storage Limited Partnership. The pumps Sulzer supplies are for the challenging application of injecting hydrocarbons at a very high pressure into salt caverns for storage. The pumps will be shipped in the first quarter of 2016. Sulzer’s sales, tendering, and engineering teams from Canada, USA, and Brazil provided a solution that met the ...


    By Sulzer

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you